How it Works
HP
Loading...
CF411X

HP CF410A, CF411A, CF413A, CF410X, CF411X TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

...
HP
®
COLOR LJ PRO M452/MFP 477
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
HP CF410/11/12/13 A/X-HP 410 SERIES TONER CARTRIDGE
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
REMANUFACTURING THE HP COLOR LJ PRO M452, MFP 477
(CF410//11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGES
By Mike Josiah and the Technical Staff at UniNet
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
New cartridges do not come with a drum cover. They use a new type of box insert to protect the cartridge. It’s a good idea to have your customers save these inserts.
The end caps are plastic-welded, and the doctor blade has a left-hand threaded screw, but once past the welds are not that difficult to do.
PRINTERS CURRENTLY BASED ON THE M452 ENGINE
HP LaserJet Pro M452dn HP LaserJet Pro M452dw HP LaserJet Pro M452nw HP LaserJet Pro MFP M477fnw
CARTRIDGES USED IN THESE MACHINES (HP 410A/X SERIES)
CF410A (Black) 2,300 pages USD$84.99 list* CF411A (Cyan) 2,300 pages USD$109.99 list* CF412A (Magenta) 2,300 pages USD$109.99 list* CF413A (Yellow) 2,300 pages USD$109.99 list*
CF410X (Black High Yield) 6,500 pages USD$141.99 list* CF411X (Cyan High Yield) 5,000 pages USD$189.99 list* CF412X (Magenta High Yield) 5,000 pages USD$189.99 list* CF413X (Yellow High Yield) 5,000 pages USD$189.99 list*
*Pricing current in U.S. American Dollars, as of July 2016. With the new machines shipping with 1,200 page black and color starter cartridges, there is sure to be a fast growing demand for remanufactured cartridges!
First released in March 2016, the Pro M452/477 series of color laser printers are based on a 28ppm black & color, 600 DPI engine. (38,400 x 600 DPI enhanced DPI).
The first page out is stated at under 9.0 seconds. Standard installed memory is 256MB NAND Flash with 128MB DRAM, up to 256MB NAND Flash with 256MB Dram depending on the model.
REQUIRED TOOLS
1. Toner approved vacuum
2. A small screwdriver (common style)
3. A Phillips head screwdriver
4. Needle nose pliers
5. Flat blade (common) screwdriver
REQUIRED SUPPLIES
1. Color toner for use in the HP M452/477 series cartridges (check for standard or high yield)
2. New replacement chip (check color, standard or high yield)
3. New long life drum
4. New wiper blade
5. New developer roller (optional)
6. New PCR (optional)
7. New doctor blade (optional)
8. Good quality double-sided tape 1/8” wide. (3M Brand preferred)
9. Lint free cloths
10. Conductive grease
1. With the HP top label facing you, remove the spring from the left side of the cartridge.
2. On the same side, using a flat blade screwdriver, pry out the top of the end cap until you feel the weld give way.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
3. Slide the screwdriver inside the end cap to the place as indicated and gently pry again until the end cap comes free.
4. Remove the end cap.
5. Start to separate the two halves.
You will see a small white plastic tab on the drum gear assembly, that blocks you from removing the waste chamber.
Lift up on that tab while pulling the end cap out to separate the two halves.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
6. Remove the drum from the waste chamber. 7. Remove the PCR. Clean with your preferred PCR cleaner and place aside in a clean area.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
8. Remove the two wiper blade screws and the wiper blade.
10. Coat the new wiper blade with your preferred lubricant and install.
Install the two screws.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
9. Clean out all the waste toner from the chamber.
Make sure all the wiper blade seals are clean.
Loading...
+ 11 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use