HP A1295A User Manual

a

HP VISUALIZE Monitors

HP 24” Display (A1295A)

(22.5” viewable)
Wide Aspect Monitor

Maximum Desktop –
HP’s 24” wide aspect monitor

Images from HP's VISUALIZE workstations can
now be even larger. HP’s 24” wide aspect
monitor can display resolutions up to 1920x1200
pixels, which results in 75% more viewable
pixels than a traditional 1280x1024 resolution.
This monitor can display wide aspect formats
(16:10 and 16:9) as well as traditional formats
(4:3 and 5:4). This versatility combined with a
luxurious screen size make this monitor ideal for
viewing HP VISUALIZE workstation images.

Features and Benefits

• Large screen area makes viewing graphics

much easier than with traditional resolutions

• Larger screen image means more image

details are more visible, helping to improve
model design

• Wide aspect format allows two 8-1/2” x 11”

pages to be displayed side by side on the

Product Dat

same screen

• Ability to display multiple aspect ratios (wide

and traditional) allows wider range of
graphics hardware and software to be used

• High refresh rates of up to 90Hz reduce

eyestrain and result in better productivity

• Adjustable controls allow complete

customization of monitor via front panel
controls and On Screen Display (OSD)

• Dual video input allows video to be switched

between 2 workstations

Ordering Information

• A1295A - HP product number

Monitor must be ordered with a workstation
power cord kit (A4199B/C/D depending on
workstation model) to ensure correct power
cord for local country destination.

Supported Configurations

The A1295A monitor is supported in wide
aspect format on the following HP
VISUALIZE workstations:

• PA-RISC HP-UX

B-,C-, and J-class with VISUALIZE fx4­Pro, VISUALIZE fx6-Pro, and
VISUALIZE-fxe

• IA-32 Windows NT

P- and X-class with the following AGP
graphics: VISUALIZE fx2+, fx4+, fx6+,
Elsa Synergy, Oxygen GVX

• IA-32 Linux

PL- and PX-class with Elsa Synergy or
Oxygen GVX graphics

Supplied Accessories

• (1) Detachable 15-pin Dsub (male) to

Dsub (male) video cable. 1.8 meters

• (1) U.S. power cord (NEMA 5-15P).

125V / 10A. 1.8 meters

• (1) Users Manual (English, French,

German, Spanish, Italian, Japanese)

Monitor / Screen

Trinitron
.28mm stripe pitch). P22 Phosphor.
Maximum active screen size 482mm (19 in)
x 304mm (12 in). Anti-reflection and anti­static screen.

Scan Frequency

Horizontal: 30-96 kHz
Vertical: 50-160 Hz

Synchronization type

Analog RGB video input. Separate
horizontal and vertical synchs. Composite
horizontal and vertical synchs. Synch-on­green capability (nominal synch chip
amplitude of -0.286 Vp-p

 Aperture Grill Tube (.25mm -

± 10%)

November 22, 1999

www.hp.com

HP VISUALIZE Monitors

Resolutions / Timings

Maximum resolution: 1920x1200 (76Hz only)
Minimum resolution: 640x480 (60Hz only)
Maximum timing: 90Hz (1280x1024)
Minimum timing: 60Hz (multiple resolutions)
Factory default resolution: 1920x1200 at 76Hz.

Supported preset resolutions are (wide aspect

formats are marked in blue):

640x480

720x400

1280x1024

1600x1024 (16:10)

1600x1200

1920x1035 (16:9)

1920x1080 (16:9)

VISUALIZE EG
VISUALIZE fxe
VISUALIZE

fx2-Pro
VISUALIZE
fx4-Pro, fx6-Pro
VISUALIZE
fx2+, fx4+, fx6+
Elsa Synergy
Oxygen GVX

Video Connection

Monitor has two video inputs:

• One 15-pin Dsub connector (female), capable

of DDC1 and DDC2Bi

• One 5-receptacle BNC connector

Video input can be toggled between two video
inputs via a switch on the front of the monitor. One
detachable 15-pin Dsub-to-Dsub video cable is
provided with the monitor. To use the second video
input, a BNC to Dsub video cable must be ordered
(HP product number A6019A).

Plug & Play

Supports Display Plug&Play guidelines according
to VESA DDC1, DDC2B and DDCAB.

•

•

•

•

•

•

•

• •

•

• • •

• • •

• • •

• • •

•

• •

• •

Connecting to Dsub graphics

This monitor includes a 15-pin Dsub-to­Dsub video cable for connecting to a Dsub
graphics card. To connect the monitor’s
BNC video input to Dsub graphics, a BNC
to Dsub cable will be needed (HP product
number A6019A). HP’s IA-32 NT and Linux
workstations use Dsub graphics.

Connecting to EVC graphics

PA-RISC UNIX workstations use EVC
graphics cards. To connect this monitor to
an EVC graphics card, use the included
Dsub cable and a Dsub to EVC adapter.
A Dsub to EVC adapter is included with
every PA-RISC UNIX workstation when

1920x1200 (16:10)

purchased. Spare Dsub to EVC adapters
can be ordered using HP product number
A4168A. To connect the monitor’s BNC
video input to Dsub graphics, a BNC to
Dsub cable (A6019A) and Dsub to EVC
adapter (A4168A) will be needed.

Controls

Front panel: power button, input select
switch, reset, (OSD) option, color (OSD),
screen (OSD), shape/geometry (OSD), size
(OSD), center (OSD), brightness, contrast,
power mode LED

On Screen Display (OSD) settings:

Picture size and position, brightness and
contrast, shape/geometry, rotation, vertical
and horizontal convergence, moiré
cancellation, landing, reset to defaults, color
temperature, red/green/blue intensity,
demagnetize, menu language, lock buttons

Color Temperature

Preset temperatures:
5000K, 6500K, 9300K. Individual RGB
gain/bias control can also be set.

Power

• AC 100-120V, 50/60 Hz., 2.2A

• AC 200-240V, 50-60Hz., 1.4A

• 200W maximum power consumption,

less than 140W in standby mode, less
than 15W in suspend mode, less than
8W in sleep mode, 0W when power off.

• VESA, DPMS, NUTEK compliant

• EPA Energy Star compliant

November 22, 1999

www.hp.com