How it Works
HP
Loading...
5800-48G with 2 Slots
Quickspecs
53 pgs1.25 Mb0

HP 5800, 5800-24G-PoE+, 5800-24G, 5800-24G-SFP, 5800-48G-PoE Quickspecs

...
HP 5800-24G-PoE+ Switch
HP 5800-24G Switch
HP 5800-24G-SFP Switch
QuickSpecs
HP 5800 Switch Series
Overview
Page 1
HP 5800-48G-PoE Switch
HP 5800-48G Switch
HP 5800-48G Switch with 2 Slots
QuickSpecs
HP 5800 Switch Series
Overview
Page 2
HP 5800AF-48G Switch
Models
HP 5800-24G-PoE+ Switch
JC099A
HP 5800-24G Switch
JC100A
HP 5800-24G-SFP Switch
JC103A
HP 5800-48G-PoE Switch
JC104A
HP 5800-48G Switch
JC105A
HP 5800-48G Switch with 2 Slots
JC101A
HP 5800AF-48G Switch
JG225A
Key features
For enterprise edge, distribution, data center Cut-through design with low latency Support for up to 84 ports OAA module for flexible deployment Redundant, hot-swappable power supplies, fans
Product overview
HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models as well as 1 RU and 2 RU form factor configurations, HP 5800 switches are built on open standards and include an open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network edge of enterprise campus networks.
Features and benefits
Quality of Service
(QoS)
Powerful QoS feature
QuickSpecs
HP 5800 Switch Series
Overview
Page 3
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Integrated network services
with support for open application architecture (OAA) modules, extends and integrates application capability into the network
Ring Resiliency Protection Protocol
(RRPP) provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as VoIP
Management
Remote configuration and management
is available through a secure Web browser or a command-line interface (CLI)
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network
USB support
:
File copy
allows users to copy switch files to and from a USB flash drive
DHCP options
: DNS Relay and SMTP Redirection DHCP: Server (RFC 2131), Client, and Option-82 Relay (RFC 3046)
sFlow
provides scalable, ASIC-based network monitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Network Time Protocol
(NTP) synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time
Connectivity
High-density port connectivity
supports up to 84 1-Gigabit ports per unit (612 per stack)
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100 ports
Jumbo frames
on Gigabit Ethernet and 10-Gigabit ports, jumbo frames of 9k size allow high-performance remote backup and disaster-recovery services
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
IEEE 802.3at Power over Ethernet (PoE+) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
IPv6 native support
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4/IPv6)
QuickSpecs
HP 5800 Switch Series
Overview
Page 4
transitions from IPv4 to IPv6, supporting connectivity for both protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
IPv6 routing
supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and BGP routing protocols
Performance
Hardware-based wire-speed access control lists (ACLs)
feature-rich ACL implementation (TCAM-based) helps provide high levels of security and ease of administration without impacting network performance
Unique versatile architecture
supports the best of both fixed-port and modular configurations
Resiliency and high availability
Data center–optimized design
the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
Full-featured console
provides complete control of the switch with a familiar command-line interface (CLI)
Web interface
allows configuration of the switch from any Web browser on the network
RMON and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Troubleshooting
Ingress and egress port monitoring
enable network problem solving
Traceroute and ping
enable testing of network connectivity
Virtual cable tests
provide visibility to cable problems
Layer 2 switching
GARP VLAN Registration Protocol
:
allows automatic learning and dynamic assignment of VLANs
32K MAC addresses
provide access to many Layer 2 devices
4,094 port-based VLANs
provide security between workgroups
IEEE 802.1ad QinQ and Selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
QuickSpecs
HP 5800 Switch Series
Overview
Page 5
Gigabit Ethernet port aggregation
allows grouping of ports to increase overall data throughput to a remote device
10 GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Spanning Tree/MSTP, RSTP, and STP Root Guard
prevent network loops
IPFIX/sFlow
allows traffic sampling
Spanning Tree Protocols
(STP, MSTP, and RSTP)
and STP root guard
helps prevent network loops; up to 32 MSTP instances available
Layer 3 services
Address Resolution Protocol
(ARP) determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Dynamic Host Configuration Protocol
(DHCP) simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets
Layer 3 routing
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
RIP and RIPng support
provides complete support of RIP for both IPv4 and IPv6
OSPF and OSPFv3 support
provides complete support of OSPF for both IPv4 and IPv6
IS-IS and IS-ISv6 support
provides complete support of IS-IS for both IPv4 and IPv6
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
Bidirectional Forwarding Detection
(BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Virtual Router Redundancy Protocol
(VRRP)
and VRRP Extended
allow quick failover of router ports
Policy-based routing
makes routing decisions based on policies set by the network administrator
IGMPv1, v2, and v3
allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM
(for IPv4 and IPv6)
support IP Multicast address management and inhibition of DoS attacks
Equal-Cost Multipath
(ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
NEW MPLS support
provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)
NEW VPLS support
provides extended support of VPLS for data center to data center communication at Layer 2; provides support of hierarchical VPLS for scalability
QuickSpecs
HP 5800 Switch Series
Overview
Page 6
Security
Unicast Reverse Path Forwarding
(URPF) allows normal packets to be forwarded correctly, but discards the attaching packet due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports distributed UFPF
Defense-in-depth security
provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent Management Center (IMC)
Advanced processor queuing mechanism
helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address from a legitimate DHCP server on the network
IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs
allows complete control over user network access
Guest VLAN
similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
MAC-based authentication
allows or denies access to the switch based on client MAC address
HTTPS management
provides secure Web management
Multi-Customer Edge
(MCE)
-Multicast Virtual Routing and Forwarding
(MVRF)
provide MPLS Edge router support
Public Key Infrastructure
(PKI)
is used to control access
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Secure Shell
(SSHv2)
encrypts all transmitted data for secure, remote CLI access over IP networks
IP Source Guard
helps prevent IP spoofing attacks; filters packets on a per-port basis, which prevents illegal packets from being forwarded
Access control lists
(ACLs)
helps provide high levels of security and ease of administration; 6k ingress entries and 1k egress entries (IPv4 and IPv6)
Convergence
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
Internet Group Management Protocol
(IGMP) is used by IP hosts to establish and maintain multicast groups; supports v1, v2, and v3; utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks
Protocol Independent Multicast
(PIM) is used for IPv4 and IPv6 multicast applications; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM)
LLDP-MED
(Media Endpoint Discovery) is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
Monitor and diagnostics
QuickSpecs
HP 5800 Switch Series
Overview
Page 7
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
OAM
(IEEE 802.3ah) operational, administration and maintenance (OAM) management capabilities detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices
CFD
(IEEE 802.1ag)
connectivity fault detection (CFD) provides a Layer 2 link OAM mechanism used for link connectivity detection and fault locating
Additional information
HP Intelligent Resilient Framework
(IRF) Creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router Switches do not have to be co-located and can be part of a disaster-recovery system Servers or switches can be attached using standard LACP for automatic load balancing and high availability Simplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP
OAA modules
support wireless network management and high-performance security applications; leverage network infrastructure investment
Green IT and power
use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
Higher scalability with IRF
simplifies the architecture of server access networks and reduces cost and complexity; up to nine 5800 Switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric networks
Warranty and support
Lifetime warranty
for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)
†
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to:
www.hp.com/networking/contact-support
; for details on the duration of support provided with your product purchase, refer to:
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to:
www.hp.com/networking/support
; for details on the software releases available with
your product purchase, refer to:
www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at:
www.hp.com/networking/warranty
.
QuickSpecs
HP 5800 Switch Series
Overview
Page 8
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
Standard Switch Chassis
HP 5800-24G Switch
JC100A
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JC100A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC100A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-PoE Switch
JC099A
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JC099A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC099A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-SFP Switch
JC103A
24 100/1000 SFP ports min=0 \ max=24 SFP Transceivers 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Must select min 1 Power Supply 1U - Height
See Configuration
Note:1, 4
HP 5800-48G Switch
JC105A
QuickSpecs
HP 5800 Switch Series
Configuration
Page 9
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U- Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JC105A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC105A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800AF-48G Switch
JG225A
48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports min=0 \ max=6 SFP+ Transceivers Must select min 1 Power Supply Must select min 2 Fan Trays 1U- Height
See Configuration
Note:1
HP 5800-48G-PoE Switch
JC104A
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JC104A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC104A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-48G Switch with 2 Slots
JC101A
48 RJ-45 autosensing 10/100/1000 ports 2 extended module slot 4 fixed 1000 SFP ports min=0 \ max=4 SFP Transceivers Must select min 1 Power Supply 2U - Height
See Configuration
Note:4
Configuration Rules Note 1
The following Transceivers install into this switch: HP X130 SFP+ LC SR Transceiver
JD092B
HP X130 SFP+ LC LRM Transceiver
JD093B
HP X130 SFP+ LC LR Transceiver
JD094B
QuickSpecs
HP 5800 Switch Series
Configuration
Page 10
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
JD095C
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
JD096C
HP X240 10G SFP+ SFP+ 3m DAC Cable
JD097C
HP X240 10G SFP+ SFP+ 5m DAC Cable
JG081C
Note 3
Localization required on orders without #B2B, #B2C or #B2E options.
Note 4
The following Transceivers install into this Switch:
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X110 100M SFP LC LH40 Transceiver
JD090A
HP X110 100M SFP LC LH80 Transceiver
JD091A
HP X110 100M SFP LC FX Transceiver
JD102B
HP X110 100M SFP LC LX Transceiver
JD120B
HP X110 100M SFP LC BX 10-U Transceiver
JD100A
HP X110 100M SFP LC BX 10-D Transceiver
JD101A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 7
#B2E is Offered only NA, Mexico, Taiwan, and Japan.
Box Level Integration CTO Models
CTO Solution Sku
HP 58xx CTO Switch Solution
JG478A
SSP trigger sku
CTO Base Sku
HP 5800-24G Switch
JC100A
QuickSpecs
HP 5800 Switch Series
Configuration
Page 11
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 6,10
PDU Cable NA/MEX/TW/JP
JC100A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC100A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-PoE Switch
JC099A
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 6,10
PDU Cable NA/MEX/TW/JP
JC099A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC099A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-SFP Switch
JC103A
24 100/1000 SFP ports min=0 \ max=24 SFP Transceivers 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Must select min 1 Power Supply 1U - Height
See Configuration
Note:1, 4, 5,10
HP 5800-48G Switch
JC105A
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U- Height
See Configuration
Note:1, 3, 6,10
PDU Cable NA/MEX/TW/JP
JC105A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC105A#B2C
QuickSpecs
HP 5800 Switch Series
Configuration
Page 12
C15 PDU Jumper Cord (ROW)
HP 5800AF-48G Switch
JG225A
48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers) Must select min 1 Power Supply Must select min 2 Fan Trays 1U - Height
See Configuration
Note:1, 8, 10
HP 5800-48G-PoE Switch
JC104A
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 6,10
PDU Cable NA/MEX/TW/JP
JC104A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
C15 PDU ROW
JC104A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-48G Switch with 2 Slots
JC101A
48 RJ-45 autosensing 10/100/1000 ports 2 extended module slot 4 fixed 1000 SFP ports min=0 \ max=4 SFP Transceivers Must select min 1 Power Supply 2U - Height
See Configuration
Note:4, 5,10
Configuration Rules
Note 1
The following Transceivers install into this switch: (Use #0D1 or #B01 if switch is CTO) If Applicable -
HP X130 SFP+ LC SR Transceiver
JD092B
HP X130 SFP+ LC LRM Transceiver
JD093B
HP X130 SFP+ LC LR Transceiver
JD094B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
JD095C
QuickSpecs
HP 5800 Switch Series
Configuration
Page 13
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
JD096C
HP X240 10G SFP+ SFP+ 3m DAC Cable
JD097C
HP X240 10G SFP+ SFP+ 5m DAC Cable
JG081C
Note 3
Localization required on orders without #B2B, #B2C or #B2E options.
Note 4
The following Transceivers install into this Switch: (Use #0D1 if switch is CTO) If Applicable -
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X110 100M SFP LC LH40 Transceiver
JD090A
HP X110 100M SFP LC LH80 Transceiver
JD091A
HP X110 100M SFP LC FX Transceiver
JD102B
HP X110 100M SFP LC LX Transceiver
JD120B
HP X110 100M SFP LC BX 10-U Transceiver
JD100A
HP X110 100M SFP LC BX 10-D Transceiver
JD101A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 5
If this Switch is selected at least one of these Power Supply with #0D1 is required:
HP 5500 150WAC Power Supply
JD362A
HP 5800 300W AC Power Supply
JC087A
HP 5800 750W AC PoE Power Supply
JC089A
Note 6
If this Switch is selected, Then a Minimum of one of the following must be included:
1. 1 factory integrated accessory per switch. See Menu below, option must be ether #0D1 or #B01. or
2. A Factory Express Service. (For Watson and CLIC Only: See Factory Express Tab on Menu)
Note 8
If this Switch is selected at least one of these Power Supply with #0D1 is required: JC680A - HP A58x0AF 650W AC Power Supply JC681A - HP 58x0AF 650W DC Power Supply
Note 9
B2E is Offered only in . NA, Mexico, Taiwan, and Japan.
Note 10
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Rack Level Integration CTO Models
Standard Switch Chassis
QuickSpecs
HP 5800 Switch Series
Configuration
Page 14
HP 5800-24G Switch
JC100A
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JC100A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC100A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-PoE Switch
JC099A
24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JC099A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC099A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-24G-SFP Switch
JC103A
24 100/1000 SFP ports min=0 \ max=24 SFP Transceivers 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Must select min 1 Power Supply 1U - Height
See Configuration
Note:1, 4, 10
HP 5800-48G Switch
JC105A
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U- Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JC105A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
QuickSpecs
HP 5800 Switch Series
Configuration
Page 15
PDU Cable ROW
JC105A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800AF-48G Switch
JG225A
48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers) Must select min 1 Power Supply Must select min 2 Fan Trays 1U - Height
See Configuration
Note:1, 8, 10
HP 5800-48G-PoE Switch
JC104A
48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JC104A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC104A#B2C
C15 PDU Jumper Cord (ROW)
HP 5800-48G Switch with 2 Slots
JC101A
48 RJ-45 autosensing 10/100/1000 ports 2 extended module slot 4 fixed 1000 SFP ports min=0 \ max=4 SFP Transceivers Must select min 1 Power Supply 2U - Height
See Configuration
Note:4, 10
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X130 SFP+ LC SR Transceiver
JD092B
HP X130 SFP+ LC LRM Transceiver
JD093B
HP X130 SFP+ LC LR Transceiver
JD094B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP RJ45 T Transceiver
JD089B
QuickSpecs
HP 5800 Switch Series
Configuration
Page 16
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use