5090-3379Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
Kit
C2087-69001Maintenance kit - Replacement parts after 200K pages (240V) includes, transfer roller & clip, 6 pickup separation rollers,
duplex roller, and (240V) fusing assembly
NO LONGER SUPPLIED
REQUIRES RETURN OF DEFECTIVE PART
C2087-67902New Part for C2087-69001
C2801A Output Stacker
Arm
3
C2801-40001Height sensor arm
Brake
4
C2801-80024Paper brake - Paper stop for elevator module
NO LONGER SUPPLIED
Cable
5
C2801-60003Interface cable which connects the optional output stacker and the printer sensor board
C2801-80014Output stacker elevator module ribbon cable
C2801-80026Phone cable assembly - 4 pin (F) RJ-11 connector to 2 pin (F) connector - 22.1cm (8.7 inches) long
Caster
1492-0167Caster (without brake)
NO LONGER SUPPLIED
1492-0168Caster (with brake)
NO LONGER SUPPLIED
Cover
C2801-40002Left cover of transport module - Of optional output stacker
C2801-40003Right cover (on electronic box) of transport module - Is part of optional output stacker
Disk
C2801-80025Non-skid disks - Keeps printer in place on cabinet (8 disk per package) - For optional output stacker
Door
C2801-80012Cabinet door - For C2801A Output Stacker
NO LONGER SUPPLIED
Electronic Box
C2801-60001Electronic box (120v)
NO LONGER SUPPLIED
C2801-60002Electronic box (240v)
Elevator
16
C2801-80008Elevator module - Includes rails and ribbon cable - Mounted in output stacker cabinet
NO LONGER SUPPLIED
C2801-60001New Part for C2801-80008
Guide
C2801-80017Paper exit guide - Provides a smooth paper path from the printer to the transport assembly (Includes installation
instructions)
NO LONGER SUPPLIED
RB1-0557-040CNPaper guide - Attaches to the delivery cover on the printer
Holder
19
C2801-80022Power module holder - Holds power module for paper feeder
RB1-0756-000CNDuplex access door - Fold down door on left side of printer
Foot
84
RB1-0692-000CNRubber foot
Holder
85
RB1-0485-000CNTop cover output bin full sensor arm holder
NO LONGER SUPPLIED
Latch
86
XZ9-0379-000CNDoor latch insert (Black)
Plate
87
C2009-00006Lower MIO Cover Plate - For empty MIO slot
NO LONGER SUPPLIED
88
C2009-60109Upper MIO Cover Plate - For empty MIO slot
Spring
89
RB1-0734-000CNTorsion spring for font cartridge door
Tray
90
RG5-0073-000CNOutput tray assembly - Folds down - For rear paper output
LaserJet 4Si M
Fusing Assembly Parts
Fusing Assembly
91
33491-69012Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat
REQUIRES RETURN OF DEFECTIVE PART
RG5-0046-530CNNew Part for 33491-69012
92
33491-69013Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat
REQUIRES RETURN OF DEFECTIVE PART
RG5-0047-530CNNew Part for 33491-69013
93
5181-2254Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat - In quantity price break packaging (Contains 5 New
fusing assemblies)
NO LONGER SUPPLIED
94
5181-2255Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat - In quantity price break packaging (Contains 10 New
fusing assemblies)
Hardware
95
RB1-0854-020CNFusing assembly mounting screw
Labels and Transparencies
Film (Transparency)
92296ULaserJet printer transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets per box
92296TLaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets per box
Labels
92296ALaserJet printer addressing labels - 2.54cm (1.00in) x 6.67cm (2.63in) labels - 30 per sheet - 100 sheets per box
NO LONGER SUPPLIED
92296BLaserJet printer addressing labels - 3.38cm (1.33in) x 10.2cm (4.00in) labels - 14 per sheet - 100 sheets per box
NO LONGER SUPPLIED
92296CLaserJet printer addressing labels - 2.54cm (1.00in) x 10.2cm (4.00in) labels - 20 per sheet - 100 sheets per box
NO LONGER SUPPLIED
92296DLaserJet printer addressing/shipping labels - 5.08cm (2.00in) x 10.2cm (4.00in) labels - 10 per sheet - 100 sheets per
box
NO LONGER SUPPLIED
92296ELaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box
J4101-61011External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and
LAN network - Does NOT include power module - (J4101A, J4101B)
Interface (Product)
J2552BLAN & LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
NO LONGER SUPPLIED
J2556BEtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector
NO LONGER SUPPLIED
J2590AExternal JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3
parallel (DB-25) output connectors
NO LONGER SUPPLIED
J2591AExternal JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2)
connectors
NO LONGER SUPPLIED
J3258BExternal JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264AExternal JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45)
LAN
J3265AExternal JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45),
10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4100AJetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network
connection using RJ45 or BNC connectors
J4105AJetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or
DB9 connectors
J4106AJetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45
connector
Module
J2382-69003External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors
J2383-61005External token ring interface module - Has DB-9 connector
J2590-69001External JetDirect LAN interface module with RJ-45 connector for ethertwist (10Base-T) or 100VG/802.12 input and 3
parallel (DB-25) output connectors
REQUIRES RETURN OF DEFECTIVE PART
J2590-61011New Part for J2590-69001
J2591-69001External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors
J2592-69001External JetDirect LAN interface module with ethertwist (10Base-T) connector
REQUIRES RETURN OF DEFECTIVE PART
J2592-61001New Part for J2592-69001
J2593-69001External JetDirect LAN interface module with Ethertwist (10Base-T) and ThinLAN (10BASE-2) input connectors and 3
parallel (DB-25) output connectors - (part of J2593A)
J2594-69001External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and 3 parallel (DB-25) output
connectors - (part of J2594A)
REQUIRES RETURN OF DEFECTIVE PART
J2594-61011New Part for J2594-69001
J3258-61011External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J3258A, J3258B)
J4102-69011External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J4102A, J4102B)
REQUIRES RETURN OF DEFECTIVE PART
J4102-61011New Part for J4102-69011
Module (Product)
J4101BExternal JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector
J4102BExternal JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2341-60128AppleTalk (LocalT alk) interface board - Has DIN-8 connector
J4100-69001JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network
connection using RJ45 or BNC connectors - (J4100A)
REQUIRES RETURN OF DEFECTIVE PART
J4100-61001New Part for J4100-69001
J4106-69001Replacement JetDirect 400N modular input/output (MIO) internal print server
REQUIRES RETURN OF DEFECTIVE PART
J4106-61001New Part for J4106-69001
J2552-69013LAN and LocalTalk interface - EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) connectors
J2553-69003EtherTwist 10Base-T, ThinLAN 10Base-2, and LocalTalk board
Power Cord
8120-1351Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,
Singapore, Malaysia, and Brunei)
8120-1369Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,
and China)
8120-1378Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin
America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh,
Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)
8120-2956Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)
8120-4753Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 100V in Japan)
8120-6302'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug
for power output
Power Module
0950-2372Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For
J2382/83A/B
0950-3169Wall mount power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA, Canada) - For use
with the J2592A external JetDirect LAN interface module
0950-3170Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA (Europe, Israel) - For use with the J2592A
external JetDirect LAN interface module
0950-3171Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U.K., Hong Kong) - For use with the
J2592A external JetDirect LAN interface module
0950-3172Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) - For use with the J2592A external
JetDirect LAN interface module
0950-3348Wall mount power supply module (MEI-AH ED12006) - 110-127VAC input, 57-63Hz - 13VDC output, 800mA, 10.4 watts
(for use in the United States and Canada) - For models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B,
J4101A/B, J4102A/B
0950-3349Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for
use in Europe and Israel) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A,
J3282B, J4101A/B, J4102A/B
0950-3350Wall mount power supply module (MEI-AH ED12008) - 220-240VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts
(for use in the United Kingdom) - For JetDirect/infrared interfaces J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A,
NO LONGER SUPPLIED
C2010-9093933491A/C2010A LaserJet IIISi/4Si combined service manual
C2011-90915C2011A LaserJet 4Si MX 'Getting Started' manual (English)
NO LONGER SUPPLIED
5021-8943LaserJet quick reference guide - Volume 1 of 2 volume set
5090-3390LaserJet quick reference guide - Volume 2 of 2 volume set
Manual Kit
5021-0377HP-GL/2, PCL5 and PJL technical reference manual kit
C2011-99039LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also
includes software application notes & JetDirect manuals (German)
RS5-2021-000CNCompression spring for arm that holds right side of transfer roller
Power Supplies and Parts
Cable
249
RG5-0104-000CNCable assembly which connects the DC controller to the high voltage power supply
NO LONGER SUPPLIED
Power Cord
8120-1351Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,
Singapore, Malaysia, and Brunei)
8120-1369Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,
8120-1689Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh,
Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)
8120-2371Power cord (Black) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada)
8120-2956Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)
8120-4211Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in South Africa and India)
Power Supply
257
RG5-0164-000CNAC power supply/sensor board - 120VAC, 60Hz
258
RG5-0165-000CNAC power supply/sensor board - 240VAC, 50Hz
259
RG5-0166-060CNAC power supply - 120VAC, 60Hz
260
RG5-0167-060CNAC power supply - 240VAC, 50Hz
261
RG5-0168-000CNDC power supply assembly - 120VAC, 60Hz
262
RG5-0169-000CNDC power supply assembly - 240VAC, 50Hz
263
RG5-0170-080CNHigh voltage power supply assembly (transformer)
Shaft
264
RB1-0811-000CNPower switch shaft - From front panel button to power switch
NO LONGER SUPPLIED
Switch
265
RG5-0102-030CNPower switch assembly
266
RH7-6020-000CNOn/off rocker switch for power switch assembly - 250V, 16A