QuickSpecs
Networking Adapters for HP Workstations
Overview
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 1
Networking Adapters for HP Workstations
Models
Compatibility
Ethernet Networking
Part Number
Systems
HP 1-Port 1GbE Flex IO NIC
3TQ26AA
HP Z2 G4 (Tower, Small-Form-Factor, and Mini)
Intel® I210-T1 1-Port 1GbE NIC
E0X95AA
HP Z240/Z440/Z640/Z840/Z4 G4/Z6 G4/Z8 G4
HP 361T 2-Port 1GbE NIC
C3N37AA
HP Z440/Z640/Z840
Intel® I350-T2 2-Port 1GbE NIC
V4A91AA
HP Z240/Z440/Z4 G4/Z6 G4/Z8 G4
Intel® I350-T4 4-Port 1GbE NIC
W8X25AA
HP Z240/Z440/Z640/Z840/Z4 G4/Z6 G4/Z8 G4
Aquantia® AQN-108 1-Port 5GbE NIC
1PM63AA
HP Z240/Z440/Z4 G4/Z6 G4/Z8 G4
Intel® X540-T2 2-Port 10GbE NIC
K4T75AA
HP Z440/Z640/Z840
Intel® X550-T2 2-Port 10GbE NIC
1QL46AA
HP Z4 G4/Z6 G4/Z8 G4
HP Z Dual-Port 10GbE Network Module
1QL49AA
HP Z6 G4/Z8 G4
Fiber Ethernet Networking
Allied Telesis 1GbE LC Fiber 2pc Module
4CR69AV
HP Z2 G4 Mini
HP 560SFP+ 2-Port 10GbE SFP+ NIC
C3N52AA
HP Z240/Z440/Z640/Z840
Intel® X710-DA2 2-Port 10GbE SFP+ NIC1
1QL47AA
HP Z4 G4/Z6 G4/Z8 G4
HP 10GbE SFP+ SR Transceiver
C3N53AA
HP Z240/Z440/Z640/Z840/Z4 G4/Z6 G4/Z8 G4
Wireless Networking
Intel® 8260 802.11 a/b/g/n/ac WLAN + Bluetooth 4.2 PCIe NIC
N0S95AA
HP Z240/Z440/Z640/Z840
Intel® 8265 802.11 a/b/g/n/ac WLAN + Bluetooth 4.2 PCIe NIC
1QL48AA
HP Z4 G4/Z6 G4/Z8 G4
Intel® 9260 802.11 a/b/g/n/ac Wave2 WLAN + Bluetooth 5 PCIe
NIC
3TK89AA
HP Z8 G43
Intel® 9560 802.11 a/b/g/n/ac WLAN + Bluetooth 5 M.2 NIC
2ZQ49AV 2
HP Z2 G4 (Tower, Small-Form-Factor, and Mini)
Intel® AX200 802.11 a/b/g/n/ac/ax(WiFi 6) WLAN + Bluetooth
5 PCIe NIC
6VF53AA
HP 705 MT/800 G4/Z1
Intel® AX200 802.11 a/b/g/n/ac/ax(WiFi 6) V-pro WLAN +
Bluetooth 5 PCIe NIC
7CE01AA
Z2 G4 Tower/SFF, HP Z4 G4/Z6 G4/Z8 G4
Notes:
1
Intel® X710-DA2 is not supported on Windows 7 or Windows 8.1
2
Part Number ending with AV implies that the option is only available in factory configuration for certain platforms and not as an
aftermarket option kit
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 2
HP 1-Port 1GbE Flex IO NIC(3TQ26AA)
Introduction
The HP 1-Port 1GbE Flex IO NIC is designed to work in the Flex IO port of select HP systems. Refer to platform specifications for
compatibility. It utilizes a Realtek RTL8153 10/100/1000 Ethernet controller to provide an additional 1GbE LAN Port.
Performance and Features
• Supports IEEE 802.3az-2010, also known as Energy Efficient Ethernet (EEE). IEEE 802.3az-2010 operates with the IEEE
802.3 Media Access Control (MAC) Sublayer to support operation in Low Power Idle mode. When the Ethernet network is
in low link utilization, EEE allows systems on both sides of the link to save power
• Fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum features, and supports IEEE 802 IP Layer 2
priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN).
Network Management
The HP 1-Port 1GbE Flex IO NIC provides Wake-on-LAN (WOL) support through the Flex IO port. A system that supports Wake on
LAN can remain available to a systems administrator during its normal downtime. Once the machine is awakened, the systems
administrator can remotely control, audit, debug, or manage the machine.
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
1 RJ-45
System Interface
Flex IO
Network Cable
1GbE over Category 5e (or better) up to 100m
Data Rates Supported
10/100/1000 Mbps, Half- and full-duplex
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 3
Controller
Realtek RTL8153
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green): Off = 100Mbps, Green = 1Gbps
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Q (Virtual LAN)
802.3az (Energy Efficient Ethernet)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
0.81W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
1.5 in x 1.5 in. x 0.75 in (3.81 cm x 3.81 cm x 1.9 cm)
Kit Contents
HP 1-Port 1GbE Flex IO NIC
2 screws for securing to the system motherboard
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 4
Intel® I210-T1 1-Port 1GbE NIC (E0X95AA)
Introduction
The Intel® Ethernet Controller I210 Family provides an ideal GbE solution for customers looking for a full-featured Gigabit
Ethernet Media Access Control (MAC) and Physical-Layer (PHY) for Desktop Workstation applications. The Intel Ethernet
Controller I210 Family supports advanced features such as Audio-Video Bridging (AVB), IEEE 802.1AS Precision Time Stamping,
Error Correcting Code (ECC) Packet Buffers, and Enhanced Management Interface options.
Single-port controllers use a PCIe v2.1 one lane (x1) interface operating at 2.5GT/s. The Intel® Ethernet Controller I210 Family
provides fully integrated GbE MAC/PHY capabilities that can be configured for either 1000 Mb/s or 10/100 Mb/s modes of
operation. The Intel® Ethernet Controller I210 Family enables a quick migration from custom interconnects to Ethernet.
Performance and Features
• IEEE 802.1Qav Audio-Video Bridging (AVB) for customers requiring tightly controlled media stream synchronization,
buffering and reservation
• Hardware-based time stamping of IEEE 1588 and 802.1AS packets enabling high-precision time synchronization over
Ethernet
• Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescing for increased
efficiency and reduced power consumption
• Extended management support including MCTP, NC-SI or SMBus interfaces supporting IPMI pass-through and OS2BMC
Network Management
The Intel® I210-T1 provides Wake-on-LAN (WOL) support through the PCI Express bus. A system that supports Wake on LAN can
remain available to a systems administrator during its normal downtime. Once the machine is awakened, the systems
administrator can remotely control, audit, debug, or manage the machine.
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 5
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
1 RJ-45
System Interface
PCI Express v2.1 x1
Network Cable
1GbE over Category 5e (or better) up to 100m
Data Rates Supported
10/100/1000 Mbps, Half- and full-duplex
Controller
Intel® Ethernet I210 Controller
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = 10Mbps, Green = 100Mbps, Amber = 1Gbps
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Qav (Audio-Video Bridging)
802.1Q (Virtual LAN)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
0.81W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
0.709 in x 2.64 in. (6.7 cm x 1.8 cm)
Kit Contents
Clamshell container holding:
• Intel® I210-T1 Single-Port 1GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 6
HP 361T 2-Port 1GbE NIC (C3N37AA)
Introduction
The HP 361T PCIe Dual Port Gigabit NIC is a high-performance PCI Express (PCIe) Gen 2.1 dual port, copper, gigabit network
solution for HP Z-Workstation customers who demand the latest in dual port Gigabit Ethernet bandwidth and features. It offers
two ports on a single PCI Express adapter, allowing customers to save valuable I/O slots for other uses. It is based upon the highperformance Intel® Ethernet Controller I350 and offers a four lane (x4) PCI Express bus.
The 361T includes support for Wake-on-LAN (WOL). Pre-Boot Execution environment (PXE) is disabled as a default. Additionally,
it ships with support for Jumbo Frames, Network Fault Tolerance, Load Balancing, and various offload capabilities such as
Segmentation Offload and Large Send Offload (LSO) that offer further network throughput improvements. Additionally, it is easy
to install in either standard or low-profile slots with support for IPv6 packet transmit and receive.
361T offers support for the latest power management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing.
This latest dual-port adapter comes with IEEE 1588 Precision Time Stamping feature.
The HP 361T is positioned as the follow-on to the HP NC360T.
Performance and Features
10/100/1000 Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes
bottlenecks. Because the HP 361T supports both 10Mbps Ethernet and 100Mbps Fast Ethernet in addition to Gigabit Ethernet,
users are guaranteed end-to-end protocol support across their enterprise.
• Dual port bandwidth, Gigabit PCI Express 2.1 NIC, with full height or low-profile bracket
• New fully integrated (bridgeless) Intel® Ethernet I350 Controller, optimized for the new Integrated I/O and Data Direct I/O
technologies
• Supports the IEEE 1588 Precision Time Stamping protocol and 802.1AS implementation
• Supports latest virtualization features including VMware NetQueue and Microsoft VMQ, plus power management
technologies such as IEEE 802.3az and DMAC
• Support for 9.5K Jumbo Frames, TCP/IP Checksum Offload (TCO) & large send offload (LSO)
• Intel® Integrated I/O and Data Direct I/O for increased performance and reduced latency
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agent for Windows
• The HP 361T supports cable runs up to 100 meters (328 feet).
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 7
NOTE: Support for Preboot eXecution Environment (PXE) is disabled as a default. Contact HP Technical Support for instructions to
enable PXE.
Network Management
The HP 361T provides Wake-on-LAN (WOL) support through the PCI Express bus. A system that supports Wake on LAN can remain
available to a systems administrator during its normal downtime. Once the machine is awakened, the systems administrator can
remotely control, audit, debug, or manage the machine. WoL is limited to Port A only.
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
2 RJ-45
System Interface
PCI Express v2.1 x4
(operable in PCI Express v2.1 x1 with potential performance degradation)
Network Cable
1GbE over Category 5e (or better) up to 100m
Data Rates Supported
10/100/1000 Mbps, Half- and full-duplex
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = 10Mbps, Green = 100Mbps, Amber = 1Gbps
Controller
Intel® Ethernet I350 Controller
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Q (Virtual LAN)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 8
Power Requirement
4.4W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
5.5 in x 2.75 in (14 cm x 7 cm) (without bracket)
Kit Contents
Clamshell container holding:
• HP 361T Dual-Port 1GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 9
Intel® I350-T2 2-Port 1GbE NIC (V4A91AA)
Introduction
The Intel® Ethernet Server Adapter I350 family builds on Intel’s history of excellence in Ethernet products. Intel continues its
market leadership with this new generation of PCIe* gigabit Ethernet (GbE) network adapters. Built with the bridgeless Intel®
Ethernet Server Adapter I350, these adapters represent the next step in the GbE networking evolution for the enterprise and data
center by introducing new levels of performance through industry-leading enhancements for both virtualized and iSCSI unified
networking environments. This new family of adapters also includes new power management technologies, such as energyefficient Ethernet and direct memory access coalescing.
Performance and Features
10/100/1000 Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes
bottlenecks. Because the Intel® I350-T2 supports both 10Mbps Ethernet and 100Mbps Fast Ethernet in addition to Gigabit
Ethernet, users are guaranteed end-to-end protocol support across their enterprise.
• Dual port bandwidth, Gigabit PCI Express 2.1 NIC, with full height or low-profile bracket
• New fully integrated (bridgeless) Intel® Ethernet I350 Controller, optimized for the new Integrated I/O and Data Direct I/O
technologies
• Supports the IEEE 1588 Precision Time Stamping protocol and 802.1AS implementation
• Supports latest virtualization features including VMware NetQueue and Microsoft VMQ, plus power management
technologies such as IEEE 802.3az and DMAC
• Support for 9.5K Jumbo Frames, TCP/IP Checksum Offload (TCO) & large send offload (LSO)
• Intel® Integrated I/O and Data Direct I/O for increased performance and reduced latency
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agent for Windows
• Support for Preboot eXecution Environment (PXE)
• Supports cable runs up to 100 meters (328 feet).
Network Management
The Intel® I350-T2 provides Wake-on-LAN (WOL) support through the PCI Express bus. A system that supports Wake on LAN can
remain available to a systems administrator during its normal downtime. Once the machine is awakened, the systems
administrator can remotely control, audit, debug, or manage the machine. WoL is limited to Port A only.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 10
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
2 RJ-45
System Interface
PCI Express v2.1 x4
(operable in PCI Express v2.1 x1 with potential performance degradation)
Network Cable
1GbE over Category 5e (or better) up to 100m
Data Rates Supported
10/100/1000 Mbps, Half- and full-duplex
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = 10Mbps, Green = 100Mbps, Amber = 1Gbps
Controller
Intel® Ethernet I350 Controller
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Q (Virtual LAN)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
4.4W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
5.5 in x 2.75 in (14 cm x 7 cm) (without bracket)
Kit Contents
Clamshell container holding:
• Intel® I350-T2 Dual-Port 1GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 11
Intel® I350-T4 4-Port 1GbE NIC (W8X25AA)
Introduction
The new Intel® Ethernet Server Adapter I350 family builds on Intel’s history of excellence in Ethernet products. Intel continues its
market leadership with this new generation of PCIe* gigabit Ethernet (GbE) network adapters. Built with the bridgeless Intel®
Ethernet Server Adapter I350, these adapters represent the next step in the GbE networking evolution for the enterprise and data
center by introducing new levels of performance through industry-leading enhancements for both virtualized and iSCSI unified
networking environments. This new family of adapters also includes new power management technologies, such as energyefficient Ethernet and direct memory access coalescing.
Performance and Features
10/100/1000 Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes
bottlenecks. Because the Intel I350-T4 supports both 10Mbps Ethernet and 100Mbps Fast Ethernet in addition to Gigabit Ethernet,
users are guaranteed end-to-end protocol support across their enterprise.
• Quad port bandwidth, Gigabit PCI Express 2.1 NIC, with full height or low-profile bracket
• New fully integrated (bridgeless) Intel® Ethernet I350 Controller, optimized for the new Integrated I/O and Data Direct I/O
technologies
• Supports the IEEE 1588 Precision Time Stamping protocol and 802.1AS implementation
• Supports latest virtualization features including VMware NetQueue and Microsoft VMQ, plus power management
technologies such as IEEE 802.3az and DMAC
• Support for 9.5K Jumbo Frames, TCP/IP Checksum Offload (TCO) & large send offload (LSO)
• Intel® Integrated I/O and Data Direct I/O for increased performance and reduced latency
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agent for Windows
• Support for Preboot eXecution Environment (PXE)
• Supports cable runs up to 100 meters (328 feet).
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 12
Network Management
The Intel I350-T4 provides Wake-on-LAN (WOL) support through the PCI Express bus. A system that supports Wake on LAN can
remain available to a systems administrator during its normal downtime. Once the machine is awakened, the systems
administrator can remotely control, audit, debug, or manage the machine. WoL is limited to Port A only.
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
4 RJ-45
System Interface
PCI Express v2.1 x4
(operable in PCI Express v2.1 x1 with some performance degradation)
Network Cable
1GbE over Category 5e (or better) up to 100m
Data Rates Supported
10/100/1000 Mbps, Half- and full-duplex
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = 10Mbps, Green = 100Mbps, Amber = 1Gbps
Controller
Intel® Ethernet I350 Controller
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Q (Virtual LAN)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
5.0W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 13
Physical Dimensions (LxW)
5.5 in x 2.75 in (14 cm x 7 cm) (without bracket)
Kit Contents
Clamshell container holding:
• Intel® I350-T4 Quad-Port 1GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 14
Aquantia® AQN-108 1-Port 5GbE NIC (1PM63AA)
Introduction
The Aquantia® AQN108 is a single chip, single port high-performance PCIe 3.0 four-speed 5GBASE-T / 2.5GBASE-T / 1000BASE-T /
100BASE-TX Ethernet adapter. The AQN108 supports line-rate performance of up to 5 GbE Ethernet links. AQN108 incorporates
Aquantia’s AQrate® technology which delivers 5 GbE and 2.5 GbE network connectivity speed through 100 meters of Cat 5e or Cat
6 cabling enabling higher data rates with zero change to legacy cabling.
Performance and Features
The AQN108 is compliant with the NBASE-T™ Alliance PHY Specification and the IEEE® 802.3an standard to perform all the
functions required to implement 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-TX transmission over 100 meters of twisted
pair cabling. The AQN108 adapter integrates such features as IEEE 802.3az Energy Efficient Ethernet (EEE), 1588v2, and Media
Access Control Security (MACsec).
• PCI Express Gen3 x1
• Support for 9.5K Jumbo Frames, TCP/IP Checksum Offload (TCO) & large send offload (LSO)
• Supports cable runs up to 100 meters (328 feet)
• Supports Audio Video Bridging (AVB) and 1588v2 for management of time-sensitive traffic packets
• Supports Preboot eXecution Environment (PXE)
• Supports WoL
Network Management
The Aquantia® AQN-108 provides Wake-on-LAN (WOL) support through the PCI Express bus. A system that supports Wake on LAN
can remain available to a systems administrator during its normal downtime. Once the machine is awakened, the systems
administrator can remotely control, audit, debug, or manage the machine.
PXE Support
Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from
anywhere. It allows new or existing workstations to boot over the network and download software, including the operating
system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 15
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
1 RJ-45
System Interface
PCI Express v3.0 x1
Network Cable
5GbE over Category 5e (or better) up to 100m
Data Rates Supported
100 Mbps, 1/2.5/5 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = No Link, Amber = <5Gbps, Green = 5Gbps
Controller
Aquantia® AQC108
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Qav (Audio-Video Bridging)
802.3az (Energy Efficient Ethernet)
IEEE 1588 (Precision Clock Synchronization)
802.1P (Quality of Service)
802.1AE (MACsec)
802.3bz (NBASE-T)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
Morocco
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
3.5W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
3.72 in x 3.18 in (9.5 cm x 8.1 cm) (without bracket)
Kit Contents
Clamshell container holding:
• Aquantia® Single-Port 5GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 16
Intel® X540-T2 2-Port 10GbE NIC (K4T75AA)
Introduction
The Intel® X540 10Gb Ethernet Dual port adapter is a 10GBASE-T adapter in a PCIe 2.1 compliant form factor. It delivers full linerate performance, utilizing CAT 6A UTP cabling (or better) with distances up to 100 meters. Providing high performance Ethernet
connectivity, it is ideal for use in workstation, virtual workstation and cloud computing environments. It supports enterprise class
features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames,
PXE boot) and virtualization features (VMware NetQueue and Microsoft VMQ).
Performance and Features
• Industry-leading throughput and latency performance
• Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
• 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling (or better)
• Up to 40Gb/s bi-directional near line rate throughput
• Hardware acceleration TCP/IP/UDP stateless offloads Superior small packet performance
• Low profile design shipping with standard height and low-profile brackets
• SR-IOV capable in hardware (requires server FW, SW and OS support)
• Active Health System support
• PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS (PXE allows the server to boot over the network
and download software residing in the network.)
• Field replaceable and upgradeable
• Support for Preboot eXecution Environment (PXE)
• IEEE 1588 (Time Synchronization) ready
Network Management
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of consolidated virtual
workloads. Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to share single
PCIe resources. The Intel® X540 10Gb Ethernet Dual port adapter is SR-IOV ready, requiring firmware, software and OS support.
WoL is not supported on Intel® Ethernet 10-gigabit adapters.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 17
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
2 RJ-45
System Interface
PCI Express v2.1 x8
(operable in PCI Express v2.1 x4 with potential performance degradation)
Network Cable
1GbE over Category 5e (or better) up to 100m
10GbE over Category 6 up to 55m
10GbE over Category 6a up to 100 meters
Data Rates Supported
100 Mbps, 1/10 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = No Link, Amber = <10Gbps, Green = 10Gbps
Controller
Intel® Ethernet Controller X540
Compliance
IEEE 802.1p
802.1Q VLANs
802.3 2005 Flow Control Support
802.3ad (Link Aggregation Control Protocol)
FCC A (USA)
CE (European Union)
ICES-003 A (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
17.4W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
15.25 in x 6.5 in (38.7 cm x 16.5 cm) (without bracket)
Kit Contents
Clamshell container holding:
• Intel® X540-T2 Dual-Port 10GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 18
Intel® X550-T2 2-Port 10GbE NIC (1QL46AA)
Introduction
The Intel® Ethernet Converged Network Adapter is the newest innovation in Intel’s leadership to drive 10GbE into the broad server
market. The adapter hosts Intel’s latest Ethernet silicon, the Intel® Ethernet Controller X550, a low-cost single-chip 10GBASE-T
solution for today’s server platforms.
Performance and Features
• Industry-leading throughput and latency performance
• Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
• 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling (or better)
• Up to 40Gb/s bi-directional near line rate throughput
• Low profile design shipping with standard height and low-profile brackets
• SR-IOV for direct assignment: NIC-based isolation and switching for various virtual stations instances enabling optimal
CPU usage in virtualized environments
• PXE 2.0 enabled through boot read-only memory (ROM)
WoL is not supported on Intel® Ethernet 10-gigabit adapters.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
2 RJ-45
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 19
System Interface
PCI Express v3.0 x4
(operable in PCI Express v3.0 x4 with potential performance degradation)
Network Cable
1GbE over Category 5e (or better) up to 100m
5GbE over Category 5e (or better) up to 100m
10GbE over Category 6 (or better) up to 55m
10GbE over Category 6a (or better) up to 100 meters
Data Rates Supported
100 Mbps, 1/2.5/5/10 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = No Link, Amber = <10Gbps, Green = 10Gbps
Controller
Intel® Ethernet Controller X550
Compliance
802.1Q VLANs
802.1Qbg (Virtual Ethernet Port Aggregator)
FCC A (USA)
CE (European Union)
ICES-003 A (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
11.2W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
5.1 in x 2.7 in (14.5 cm x 6.9 cm) (without bracket)
Kit Contents
Clamshell container holding:
• Intel® X550-T2 Dual-Port 10GbE NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 20
HP Z Dual-Port 10GbE Network Module (1QL49AA)
Introduction
The HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module is a 10GBASE-T adapter utilizing the Intel X722 MAC and
X557-AT2 PHY pairing to deliver full line-rate performance, utilizing CAT 6A UTP cabling (or better) with distances up to 100
meters. Providing high performance Ethernet connectivity, it is ideal for use in workstation, virtual workstation and cloud
computing environments. It supports enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming
(bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot) and virtualization features (VMware NetQueue and Microsoft
VMQ). Experience increased performance with offload protocols and Intel’s iWARP RDMA protocol. The module was developed to
be a low-cost option without the need of a PCIe slot, which can help with network transitions to 10G.
Performance and Features
• Industry-leading throughput and latency performance
• Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
• 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling (or better)
• Up to a theoretical 20Gb/s bi-directional near line rate throughput per port (combined dual port throughput limited)
• Remote Direct Memory Access (RDMA) using internet Wide Area RDMA Protocol (iWARP)
• SR-IOV capable in hardware (requires server FW, SW and OS support; 128 per device)
• 1,536 Transmit and Receive Queues per port
• Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
• Field replaceable and upgradeable
• Support for Preboot eXecution Environment (PXE)
• IEEE 1588 / IEEE 802.1as (Time Synchronization)
• Energy Efficient Ethernet (EEE) for low power consumption during periods of low data activity
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 21
option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Network Management
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of consolidated virtual
workloads. Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating up to 256 Virtual Machines (VMs) to share
single PCIe resources. Network virtualization can be taken a step further with support of Network Service Headers (NSH), Geneve,
VXLAN, and NVGRE. The HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module is SR-IOV ready, requiring firmware,
software and OS support.
RDMA with iWARP
With the Intel® C620 series chipset, the HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module natively supports a
form of Remote Direct Memory Access (RDMA) using Internet Wide Area RDMA Protocol (iWARP). The Intel iWARP support enables
three performance-enhancing features: Kernel Bypass – which allows software applications to bypass the OS and directly access
the Ethernet adapter resources, Direct Data Placement – which allows data to be written directly into user space, bypassing
buffers, and Transport Acceleration – where the TCP/IP and iWARP protocols are accelerated in silicon relative to host software
stacks. All of these features equate to reducing latency, freeing up processor cycles, and increasing memory bandwidth. RDMA
support may be limited depending on OS support.
Dual-port 10 Gigabit Ethernet Throughput
The HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module delivers 20 Gbps full duplex Ethernet transfer rate
per individual port, providing the network performance needed to improve response times and alleviate bottlenecks that
impact performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for high performance workstation
computing, virtual workstations, database access, and more.
On the HP Z8 Gen 4 and Z6 Gen 4 Workstations, the HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module will
operate with a combined theoretical throughput of 32 Gbps full duplex when both ports are actively transferring at maximum
capacity.
Technical Specifications
Network Interface(s)
2 RJ-45
System Interface
Cabled interface through motherboard and to the Intel C622 Chipset
Network Cable
10GbE over Category 6a up to 100 meters
Data Rates Supported
1/10 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = No Link, Amber = 1Gbps, Green = 10Gbps
Controller
Intel X722 MAC’s in Chipset, paired with the Intel X557-AT2 PHY
Compliance
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
Morocco
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
Up to 7W
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
2.75 x 3 in (Module dimensions only)
QuickSpecs
Networking Adapters for HP Workstations
Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 22
Kit Contents
HP Z Dual-Port 10GbE Network Module, module-to-motherboard Oculink cable, Rear I/O
Label, Installation guide, Warranty card.
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 23
Allied Telesis 1GbE LC Fiber 2pc Module (4CR69AV)
Introduction
The Allied Telesis 1GbE LC Fiber 2pc Module is a custom solution designed specifically for use in the compact space of the HP Z2
G4 Mini Workstation. It utilizes the PCIe connection provided by the Z2 Mini’s WLAN M.2 slot and offers a 1GbE LC Fiber connection
(via non-removable optics connector) for secure network connectivity.
Performance and Features
• WoL from S3, S4, and S5
• Up to 2Gb/s bi-directional near line rate throughput
• Hardware acceleration TCP/IP/UDP stateless intelligent offloads
o ARP Offload
o Large Send Offload V2 (IPv4/IPV6)
o NS Offload
o TCP/UDP Checksum Offload (IPv4/IPv6)
• Preboot eXecution Environment (PXE) via EFI or Legacy mode
• Jumbo Frames up to 9KB
• IPv6
• RSS (up to 4 queues)
• Integrated PHY and MAC
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Network Interface(s)
1 LC Fiber Connection
System Interface
PCI Express Gen1.1x1 (via WLAN M.2 interface)
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 24
Network Cable
1GbE over Multimode LC Fiber. Distance is dependent upon network cable:
OM1 50/125um 500 MHz:km 550m
OM2 62.5/125um 200 MHz:km 275m
OM2 62.5/125um 160MHz:km 220m
Data Rates Supported
1 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Controller
Broadcom BCM57762
Compliance
IEE 802.3z Base1000SX
802.3x (Ethernet Flow Control)
802.1Q (VLANs)
802.1P (Quality of Service)
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
2W (Typical)
Operating Temperature
32° to 122° F (0° to 50° C)
Physical Dimensions (LxW)
LC Fiber Board: 37mm x 45mm x 13mm (WxLxH, including connector)
Cable: 200mm
M.2 Board: 22mm x 30mm x 1.75mm (WxLxH)
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 25
HP 560SFP+ 2-Port 10GbE SFP+ NIC (C3N52AA)
Introduction
The HP 560SFP+ 2-Port 10GbE SFP+ Adapter is based on Intel's third generation 10GbE controller, Intel® 82599.
The HP 560SFP+ 2-Port 10GbE SFP+ Adapter is ideal for high performance workstation computing, workstation virtualization,
security, consolidation, and other applications requiring the highest throughput. The total aggregate, full-duplex throughput of
40Gb/s meets the needs for customers desiring flexible and scalable I/O solutions to meet the rigorous requirements of missioncritical applications in virtualized environments.
Performance and Features
• Industry-leading throughput and latency performance
• Up to 40Gb/s bi-directional near line rate throughput
• Hardware acceleration TCP/IP/UDP stateless intelligent offloads
• Support for Preboot eXecution Environment (PXE), Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
• Integrated PHY and MAC
• IEEE 1588 (Time Synchronization)
• Supports MSI and MSI-X (Message Signaled Interrupt (Extended)
WoL is not supported on Intel® Ethernet 10-gigabit adapters.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 26
Technical Specifications
Network Interface(s)
2 SFP+ Ports (designed to be used with HP 10GbE SFP+ Transceivers)
System Interface
PCI Express v2.1 x8
(operable in PCI Express v2.1 x4 with potential performance degradation)
Network Cable
10GbE over Multimode LC Fiber via HP 10GbE SPF+ SR Transceiver
Data Rates Supported
10 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Amber): Off = No Link, Amber = 10Gbps
Controller
Intel® 82599ES
Compliance
802.3 (LAN)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.3ad (Link Aggregation Control Protocol)
802.1Q (VLANs)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
FCC A (USA)
CE (European Union)
ICES-003 A (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
10W (Typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
5.75 in x 2.25 in (14.6 cm x 4.7 cm)
Kit Contents
Clamshell container holding:
• HP 560SFP+ Dual-Port 10GbE SFP+ NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 27
Intel® X710-DA2 2-Port 10GbE SFP+ NIC (1QL47AA)
Introduction
The X710 adapters addresses the demanding needs of the next-generation agile data center by providing unmatched features for
both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance.
The new generation of X710 adapters are power misers. They deliver double the throughput with only half the power of the
previous X520 generation.
Performance and Features
• Industry-leading throughput and latency performance
• Up to 40Gb/s bi-directional near line rate throughput
• Exceptional Low Power Adapters
• Network Virtualization offloads including VXLAN, NVGRE, Geneve, Network Service Headers (NSH)
• Intel® Ethernet Flow Director for hardware based application traffic steering
• Intel® Data Plane Developer Kit (DPDK) optimized for efficient packet processing
• Excellent small packet performance for network appliances and Network Function Virtualization (NFV)
• Intelligent offloads to enable high performance with Intel® Xeon® processor-based servers
WoL is not supported on Intel® Ethernet 10-gigabit adapters.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 28
Technical Specifications
Network Interface(s)
2 SFP+ Ports (designed to be used with HP 10GbE SFP+ Transceivers)
System Interface
PCI Express v3.0 x8
(operable in PCI Express v3.0 x4 with potential performance degradation)
Network Cable
10GbE over Multimode LC Fiber via HP 10GbE SPF+ SR Transceiver
Data Rates Supported
10 Gbps
LED Indicators
Link/Activity LED (Green): Off = No Link, Solid = Link, Blinking = Activity
Speed LED (Green/Amber): Off = No Link, Green = 10Gbps
Controller
Intel® X710-AM2
Compliance
802.3 (LAN)
802.3u (100BASE-TX)
802.3ab (1000BASE-T)
802.3x (Ethernet Flow Control)
802.1Q (Virtual LAN)
802.1Qbg (Virtual Ethernet Port Aggregator)
802.3az (Energy Efficient Ethernet)
802.1AS (Frame Expansion)
IEEE 1588 (Precision Clock Synchronization)
802.1P (Quality of Service)
802.3ad (Link Aggregation Control Protocol)
10GBASE-SR
FCC B (USA)
CE (European Union)
ICES-003 B (Canada)
BSMI (Taiwan)
VCCI (Japan)
KCC (Korea)
CTICK (Australia/New Zealand)
UL (Safety)
RoHS (Restricted or Hazardous Substances)
Power Requirement
4.3W (typical)
Operating Temperature
32° to 131° F (0° to 55° C)
Physical Dimensions (LxW)
6.5 in x 2.5 in (16.5 cm x 6.4 cm)
Kit Contents
Clamshell container holding:
• Intel® X710-DA2 Dual-Port 10GbE SFP+ NIC with a standard height bracket attached
• Low profile bracket
Product Warranty statement and the Installation Guide.
QuickSpecs
Networking Adapters for HP Workstations
Fiber Ethernet Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 29
HP 10GbE SFP+ SR Transceiver (C3N53AA)
Introduction
A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to
300m on multimode fiber.
Compatibility
This transceiver is compatible with the following Network Adapters:
• HP 560SFP+ 2-Port 10GbE SFP+ NIC (C3N52AA)
• Intel® X710-DA2 2-Port 10GbE SFP+ NIC (1QL47AA)
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Technical Specifications
Operating Temperature
32°F to 113°F (0°C to 45°C)
Operating Humidity
0% to 85%, noncondensing
Dimensions (HxWxD)
0.47 in x 0.54 in x 2.19 in (1.19 cm x 1.38 cm x 5.57 cm)
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 30
Intel® 8260 802.11 a/b/g/n/ac WLAN + Bluetooth 4.2 PCIe NIC (N0S95AA)
Introduction
The Intel® Dual Band Wireless-AC 8260 is Intel's 3rd Generation 802.11ac, dual band, 2x2 Wi-Fi + Bluetooth® 4.2 adapter. It's
engineered to deliver lower power consumption, improved RF coexistence, and complete Microsoft Windows 10 support.
Combined with Intel® Core™ processors and exceptional Intel wireless innovations like Dynamic Regulatory Solution, the Intel®
Dual Band Wireless-AC 8260 dramatically reshapes your connected experience at home, work or on the go.
Performance and Features
• 802.11 a/b/g/n/ac, Dual band 2x2 with up to 867Mbps speed; 3x faster than 802.11n, with up to 3x more bandwidth per
stream
• Dual mode Bluetooth® 4.2 enables BR/EDR-Low Energy devices to act as a Bluetooth® Smart Ready Hub and Bluetooth®
Smart peripheral at the time.
• Full support for latest Microsoft Windows 10 OS with HCI drivers.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Roaming
Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, 802.11a/b/g/n, and 802.11ac)
Dual Mode Bluetooth® 2.1, 2.1+EDR, 3.0, 4.0, 4.1, BLE, 4.2
Technical Specifications
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 31
Network Interface(s)
Wireless LAN: 802.11ac dual-band 2x2, (up to 867Mbps)
Bluetooth®: 4.2
System Interface(s)
PCI Express v2.1x1
10-pin or 6-pin cable for Bluetooth®
Operating Temperature
32°F to 176°F (0C to 80°C)
Kit Contents
PCI Express Card with M.2 WLAN
Dual-Band Antenna
USB cable for internal Bluetooth® connection
Installation Guide
Warranty Card
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 32
Intel® 8265 802.11 a/b/g/n/ac WLAN + Bluetooth 4.2 PCIe NIC (1QL48AA)
Introduction
The Intel® Dual Band Wireless-AC 8265 is Intel's 3rd Generation 802.11ac, dual band, 2x2 Wi-Fi + Bluetooth® 4.2 adapter. It's
engineered to deliver lower power consumption, improved RF coexistence, and complete Microsoft Windows 10 support.
Combined with Intel® Core™ processors and exceptional Intel wireless innovations like Dynamic Regulatory Solution, the Intel®
Dual Band Wireless-AC 8265 dramatically reshapes your connected experience at home, work or on the go.
Performance and Features
• 802.11 a/b/g/n/ac, Dual band 2x2 with up to 867Mbps speed; 3x faster than 802.11n, with up to 3x more bandwidth per
stream
• Dual mode Bluetooth® 4.2 enables BR/EDR-Low Energy devices to act as a Bluetooth® Smart Ready Hub and Bluetooth®
Smart peripheral at the time.
• Full support for latest Microsoft Windows 10 OS with HCI drivers.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Roaming
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 33
Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, 802.11a/b/g/n, and 802.11ac)
Dual Mode Bluetooth® 2.1, 2.1+EDR, 3.0, 4.0, 4.1, BLE, 4.2
Technical Specifications
Network Interface(s)
Wireless LAN: 802.11ac dual-band 2x2, (up to 867Mbps)
Bluetooth®: 4.2
System Interface(s)
PCI Express v2.1x1
10-pin or 6-pin cable for Bluetooth®
Operating Temperature
32°F to 176°F (0C to 80°C)
Kit Contents
PCI Express Card with M.2 WLAN
External Dual-Band Antenna
USB cable for internal Bluetooth® connection
Installation Guide
Warranty Card
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 34
Intel® 9260 802.11 a/b/g/n/ac Wave 2 WLAN + Bluetooth 5 PCIe NIC (3TK89AA)
Introduction
The Intel® Dual Band Wireless-AC 9260 is Intel's 802.11ac wave 2, dual band, 2x2 Wi-Fi + Bluetooth® 5 adapter. It's engineered to
deliver lower power consumption, improved RF coexistence, and complete Microsoft Windows 10 support.
Combined with Intel® Core™ processors and exceptional Intel wireless innovations like Dynamic Regulatory Solution, the Intel®
Dual Band Wireless-AC 9260 doubles the theoretical throughput up to 1.73 Gbps (from 867 Mbps) using 160 Mhz channels.
Performance and Features
• 802.11 a/b/g/n/ac wave 2, Dual band 2x2 with up to 1.73Gbps speed (theoretical maximum); 6x faster than 802.11n,
with up to 6x more bandwidth per stream
• Dual mode Bluetooth® 5 provides up to 4x the range over Bluetooth 4.2 and doubles the transmit speed over the
previous generation. Also added in Bluetooth 5 is support for indoor location services.
• Full support for latest Microsoft Windows 10 OS with HCI drivers.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Roaming
Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, 802.11a/b/g/n, and 802.11ac
wave2) Dual Mode Bluetooth® 2.1, 2.1+EDR, 3.0, 4.0, 4.1, BLE, 4.2, 5.0
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 35
Technical Specifications
Network Interface(s)
Wireless LAN: 802.11ac wave 2 dual-band 2x2, (up to 1.73Gbps)
Bluetooth®: 5.0
System Interface(s)
PCI Express v2.1x1
10-pin or 6-pin cable for Bluetooth®
Operating Temperature
32°F to 176°F (0C to 80°C)
Kit Contents
PCI Express Card with M.2 WLAN External
Dual-Band Antenna
USB cable for internal Bluetooth® connection
Installation Guide
Warranty Card
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 36
Intel® 9560 802.11 a/b/g/n/ac WLAN + Bluetooth 5.0 M.2 NIC
Introduction
The Intel® Wireless-AC 9560 adapter is a 2x2 802.11ac Wi-F and Bluetooth® 5 combo module. It includes 802.11ac Wave 2
features such as 160MHz channels delivering up to 1.73Gbps and downlink MU-MIMO.
Performance and Features
• 802.11 a/b/g/n/ac, Dual band 2x2 with up to 1.73Gbps speed using 160MHz channels
• Bluetooth® 5 provides 4x range over Bluetooth® 4.2 with the same power and double the transmit speed for faster
transmissions.
• Downlink MU-MIMO allows an Access Point to simultaneously transmit data to multiple clients and can improve overall
downlink network capacity.
• Full support for latest Microsoft Windows 10 OS.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, n on-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Roaming
Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, 802.11a/b/g/n, and 802.11ac)
Dual Mode Bluetooth® 2.1, 2.1+EDR, 3.0, 4.0, 4.1, BLE, 4.2, 5.0
Technical Specifications
Network Interface(s)
Wireless LAN: 802.11ac dual-band 2x2, (up to 1.7Gbps)
Bluetooth®: 5.0
System Interface(s)
PCIe Express via M.2 interface
Operating Temperature
32°F to 176°F (0C to 80°C)
Kit Contents
Factory Configurable Only
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 37
Intel® AX200 802.11 a/b/g/n/ac/ax WLAN + Bluetooth 5 PCIe NIC (6VF53AA)
Introduction
The Intel® AX200 is Intel's 1st Generation 802.11ax (also known as WiFi Wave 6), dual band, 2x2 Wi-Fi + Bluetooth® 5 adapter.
WiFi Wave 6 compatibility greatly improves WiFi performance and reliability, especially in congested wireless network
environments, while lowering latency, increasing range, and doubling data throughput over 802.11ac wave 2.
Combined with Intel® Core™ processors and exceptional Intel wireless innovations like Dynamic Regulatory Solution, the Intel®
AX200 dramatically reshapes your connected experience at home, work, or on the go
Performance and Features
• 802.11 a/b/g/n/ac/ax Wave 6, Dual band 2x2 with up to 2.4Gbps speed (theoretical maximum); Up to 3x faster than
802.11ac and up to 4x capacity in congested environments than 802.11ac
• Dual mode Bluetooth® 5 provides up to 4x the range over Bluetooth 4.2 and doubles the transmit speed over the
previous generation. Also added in Bluetooth 5 is support for indoor location services.
• Full support for latest Microsoft Windows 10 OS with HCI drivers.
Service and Support
The HP Limited Warranty terms and conditions for HP-branded options and accessories (collectively referred to in this HP Limited
Warranty collectively as "HP Option") are as set forth in the HP Limited Warranty applicable to the HP Option and included with the
HP Hardware Product. If your HP Option is installed in an HP Hardware Product, HP will provide warranty service for either the
period specified in the warranty documents (HP Option Limited Warranty Period) that shipped with the HP Option or for the
remaining warranty period of the HP Hardware Product in which the HP Option is installed, whichever period is longer, but not to
exceed three (3) years from the date you purchased the HP Option. The HP Option Limited Warranty Period starts from the date of
purchase from HP or an HP authorized reseller. Your dated sales or delivery receipt, showing the date of purchase of the HP
Option, is your warranty start date. See your HP Option Limited Warranty for details. To the extent permitted by local law, non-HP
options are provided "AS IS." However, non-HP manufacturers and suppliers may provide warranties directly to you.
Roaming
Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, 802.11a/b/g/n, 802.11ac, and
802.11ax) Dual Mode Bluetooth® 2.1, 2.1+EDR, 3.0, 4.0, 4.1, BLE, 4.2 ,5.0
Technical Specifications
QuickSpecs
Networking Adapters for HP Workstations
Wireless Networking
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 38
Network Interface(s)
Wireless LAN: 802.11ax dual-band 2x2, (up to 2.4Gbps)
Bluetooth®: 5.0
System Interface(s)
PCI Express v2.1x1
10-pin or 6-pin cable for Bluetooth®
Operating Temperature
32°F to 176°F (0C to 80°C)
Kit Contents
PCI Express Card with M.2 WLAN External
Dual-Band Antenna
USB cable for internal Bluetooth® connection
Installation Guide
Warranty Card
QuickSpecs
Networking Adapters for HP Workstations
Summary of Changes
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 39
Date of change:
Version History:
Description of change:
October 9, 2017
From v1 to v2
Added
Intel Ethernet I350-T4 4-Port 1Gb NIC card
November 9, 2017
From v2 to v3
Added
Intel X550 10GBASE-T Dual Port NIC , Intel X710-DA2 10GbE
SFP+ DP NIC, 10GBASE-T Dual NIC Module Z6/8 G4, Intel 8265
802.11 a/b/g/n/ac&BT PCIe and Aquantia NBASE-T 5GbE PCIe NIC
September 10, 2018
From v3 to v4
Added
Added missing specs
September 21, 2018
From v4 to v5
Added
HP 1-Port 1GbE Flex IO NIC, Intel® 9560, Allied Telesis 1GbE LC
Fiber 2pc Module
September 11, 2019
From v5 to v6
Added
Intel 9260 802.11 a/b/g/n/ac Wave 2 WLAN + Bluetooth 5 PCIe
NIC and Intel AX200 802.11 a/b/g/n/ac/ax WLAN + Bluetooth
4.25 PCIe NIC
Changed
Format
February 28, 2020
From v6 to v7
Added
Intel AX200 802.11 a/b/g/n/ac/ax(WiFi 6) V-pro WLAN +
Bluetooth 5 PCIe NIC
QuickSpecs
Networking Adapters for HP Workstations
c05105339 — DA – 15619 Worldwide — Version 7 — February 28, 2020
Page 40
© 2020 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein. Intel and Core are trademarks of Intel Corporation in the U.S. and other countries. Microsoft and
Windows are either trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Linux is the
registered trademark of Linus Torvalds in the U.S. and other countries. Bluetooth is a trademark owned by its proprietor and used
by HP Inc. under license. Red Hat is a registered trademark of Red Hat, Inc. in the United States and other countries.
Loading...