Hewlett Packard Enterprise SN2100M, SN2410bM, SN2700M, SN2410M, 3PAR 8000 Quick Reference Manual

...

Download

Page 1

HPE 3PAR StoreServ and StoreFabric M-series

Storage Transformation

Accelerate Data Delivery

HPE 3PAR StoreSer Storage delivers accelerated data deliver to applications that power your

innovation agenda. Through the transformation

from disk-based storage to a unique flash-based architecture, 3PAR allows every application to have instant access to every port, node, and SSD. However, with the wrong network, you may introduce bottlenecks that prevent meeting the accelerated performance flash arrays were designed for.

Now, with the StoreFabric M-series switches, you’re able to pair an all-flash design with high non-

blocking bandwidth, zero packet loss and low

300ns latency. This ensures a truly scalable solution that provides increased density, maxim link capacity utilization, and predictable performance to accommodates dynamic, agile data movement between server and flash storage with sufficient bandwidth for the upstream network. This alleviates bottlenecks caused by traditional networks and unleashes the full capabilities of the 3PAR’s flashbased storage architecture.

Quick Reference Guide

Customers with smaller budgets do not lose features

Moving from tape and spinning disks to Flash has resulted in more

than a 100 times reduction in

latency and has the potential to drastically improve applications response times. However, this has resulted in shifting the bottleneck from the disk to the network without the right network switch. HPE M-series switches are specifically optimized for storage and offer the industries lowest latency to support demanding, high-performance storage networks which contain a mix of I/O workloads and applications on a variety of storage tiers and protocols. This ensures consistently higher levels of performance and system utilization so you can achieve the full potential from 3Pars flash-based storage.

3.2mio IOPS

@<1ms Latency

3PAR StoreSer Flash Storage

M-series Ethernet Switches

300ns

port-to-port

Latency

Networking Speed Options

1GbE / 10Gbe / 25GbE / 40GbE / 50GbE / 100GbE

10ms

120µs

2.8 us

Investment Protection

Block File Object

The storage industry is in a transformation, spinning disk are being replaced with solid state technology which reduces latency and can places a strain on networks. As latencies decrease, similar reductions must happen at the network. HPE StoreFabric Mseries switches offer the lowest latency in the industry to support the most demanding network traffic, including a seamless upgrade in the future to

support NVMe over Ethernet fabrics.

With port speeds ranging from 1 to 100Gb Ethernet, the M-series allows for leveraging 10GbE ports today for server and storage while aggregating bandwidth for switch to switch connections at greater speeds. With extra

bandwidth waiting, it’s easy to upgrade to 25,

40, 50 or even 100GbE. Helping to future-proof your network architecture by allowing for

significant speed upgrades to the architecture

over time. Providing enterprise-level performance with attractive economics and outstanding ROI.

Unified Storage

Faster Storage Needs Faster Networks:

HP 3PAR StoreServ offers unified block, file, and object storage capabilities within the same array. Adding the ability to automatically reconfigure for different protocols simultaneously and changeable in the future. As customers move to adopt cloud and software-defined data center technologies, this agility simplifies configurations while

helping to reduce the complexity of deploying

and managing storage.

Typical Read Latencies

Page 2

M-series Ethernet Switches

• High Bandwidth

• Lowest Latencies

• Zero Packet Loss

Storage Optimized Ethernet Switches

Zero Packet Loss

 Eliminates

avoidable packet loss

 Full line-rate speed

HPE StoreFabric M-series switches enable Simplivity customers to achieve an affordable, high-performance network infrastructure with predictable performance and zero-packet-loss regardless of the packet size.

Predictable Performance

 Fair bandwidth

allocation evenly divides traffic in all scenarios vs competition allowing one stream to hog half the bandwidth

Better Buffering

 Up to 18x more

buffering

 Up to 90% lower

latency in top of rack deployments

M-series

Competition

Platforms to Suit Any Requirement

StoreFabric M-series Switches

3PAR StoreSer Storage

HPE M-series is the ideal form factor and port counts to maximize efficiency and keep cost down, allowing a scalable network design that provides predictable and consistent low latency and high throughput.

HPE 3PAR StoreServ and StoreFabric M-series

Quick Reference Guide

Start smaller with full features sets, and scale to hyperscale capacities and terabyte bandwidths

• Scales to over 1.8m IOPS

• 18PB usable capacity

• 2-4 node scalability

• Up to 576 SSDs

• 24 host ports

3PAR 8000

SN2100M

• Scales to over 1m IOPS

• 9PB usable capacity

• 2-4 node scalability

• Up to 480 SSDs

• 24 host ports

• 16 physical ports

• Start as low as 8 ports

• 8 port upgrade license

• 64 ports of 10/25GbE

with breakout cables

• 32 ports of 50GbE with breakout cables

SN2410bM

SN2410M

SN2700M

• 56 physical ports

• Start as low as 24 ports

• 24 port upgrade license

• 8 ports of 40/100GbE

• 48 ports of 1 or 10GbE +

8 ports of 40 or 100 GbE

• 56 physical ports

• Start as low as 24 ports

• 24 port upgrade license

• 48 ports 10/25GbE + 8 100GbE

• 64 ports of 10/25GbE with

breakout cables

• 32 physical ports

• Start as low as 16 ports

• 16 port upgrade license

• 32 ports of up to 100GbE

• 64 ports of 10/25/50GbE with

breakout cables

3PAR 9000

• Scales to over 3.8m IOPS

• 24PB usable capacity

• 2-8 node scalability

• Up to 1152 SSDs

• 160 host ports

3PAR 20000

SN2100M

Ideal

ToR switch with

1GE

– 100GbE

connectivity options.

Redundancy in 1U

•

16x100GbE

•

32x50GbE

•

64x 10/25GbE

½ 19”

wide

SKU Options:

16 ports (Q2F23A)

8 ports (Q2F24A)

8 ports License (Q2M94AAE)

SN2410bM

48x 1 or 10GbE ports and 100GbE uplinks

• 48x 1 or

10GbE +

8x100GbE

48 ports 10GbE (Q6M28A)

24 ports 10GbE (Q6M29A)

24 ports License (Q6J41AAE)

SN2410M

48x 25GbE ports & 100GbE uplinks

• 48x 25GbE + 8x100GbE

48 ports 25GbE (Q2F22A)

24 ports 25GbE (Q6M27A)

24 ports License (Q6J40AAE)

SN2700m

100GbE Spine Switch

•

32x100GbE

•

64x50GbE

•

64x10/25GbE

32 ports (Q2F21A)

16 ports (Q6M26A)

16 ports License (Q6J39AAE)