QuickSpecs
HPE OfficeConnect 1420 Switch Series
HPE OfficeConnect 1420 Switch Series
Models
HPE OfficeConnect 1420 16G Switch |
JH016A |
||
HPE OfficeConnect 1420 24G |
2SFP Switch |
JH017A |
|
HPE OfficeConnect 1420 24G |
2SFP+ Switch |
JH018A |
|
HPE OfficeConnect 1420 24G PoE+ (124W) Switch |
JH019A |
||
HPE OfficeConnect 1420 5G Switch |
JH327A |
||
HPE OfficeConnect 1420 |
5G PoE+ (32W) Switch |
JH328A |
|
HPE OfficeConnect 1420 |
8G Switch |
JH329A |
|
HPE OfficeConnect 1420 |
8G PoE+ (64W) Switch |
JH330A |
|
HPE OfficeConnect 1420 |
24G Switch |
JG708B |
|
|
|
|
|
Key features
•Unmanaged plug-and-play Gigabit Ethernet switching
•Green features for low power consumption
•Fanless design for silent operation
•Quality of Service capabilities for improved network efficiency
•Limited lifetime warranty
Product overview
The HPE OfficeConnect 1420 Switch Series consists of unmanaged Gigabit Ethernet switches, for small business and others looking for plug-and-play basic Layer 2 connectivity for their network, including low-cost PoE+ and 10-Gigabit uplink models.
The HPE OfficeConnect 1420 Switch Series includes nine Gigabit switches. All have 10/100/1000 ports for affordable Gigabit connections using copper Cat 5e cabling. There is a 16-port RJ45-only model. There is a 24-port model with two SFP Gigabit ports, ideal where long distances require fiber-based connections. Another 24-port model supports IEEE 802.3at PoE+ on 12 of its ports, able to forward up to 30 W power on these ports to power access points, IP phones, IP cameras, and other PoE-enabled devices.
Page 1
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
Overview
For cost-effective high-speed fiber-based server connections, there is a 24-port 10/100/1000 switch with two SFP+ 10-Gigabit ports.
HPE OfficeConnect 1420 switches have quality of service (QoS) support and IEEE 802.3x flow control features that improve network efficiency. Simplified plug-and-play convenience is supported by features such as auto-MDIX and auto-speed negotiation. Hewlett Packard Enterprise has innovated and combined the latest advances in silicon technology to bring you some of the most power-efficient switches. All models support the Energy Efficient Ethernet IEEE 802.3az standard, as well as auto power-down mode on idle ports and power saving on short-distance cables. With their fanless silent operation, these switches are ideal for office deployment. HPE OfficeConnect 1420 switches come with a limited lifetime warranty covering the unit and power supplies.
Features and benefits
Ease of use
•Unmanaged
provides plug-and-play simplicity
•Auto-speed negotiation
selects individual port speed automatically, depending on client capabilities; removing the need for manual intervention enables simple plug-and-play operation
•Comprehensive LED display with per-port indicators
provides an at-a-glance view of the status, activity, speed, and full-duplex operation of the switches
•Flow control
helps ensure reliable communications during full-duplex operation
•HPE/IEEE Auto-MDIX
automatically adjusts for straight-through or crossover cables on all RJ-45 ports
Connectivity
•Gigabit Ethernet 10/100/1000 Connectivity
supports high-speed Ethernet connections over highly affordable copper Category 5 cabling.
•10-Gigabit fiber connectivity
Future-proof 10-Gigabit technology allows high-speed fiber connection to servers or other switches, with connection flexibility using optional SFP+ or SFP transceivers.
•IEEE 802.3at Power over Ethernet (PoE+)
provides up to 30 W per port, which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af compliant end device; reduces the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments (for PoE model)
Performance
•Energy-efficient Ethernet support
supports new IEEE 802.3az standard; and allows lower power consumption, when operated with IEEE-compliant client devices in 100 Mb/s mode only
•Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port.
•Jumbo frame support
allows frames up to 9,216 bytes to be switched through the network
Flexibility
Page 2
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
Overview
•Fanless design
enables quiet operation for deployment in open spaces
•Internal power supply
delivers operational convenience and an environment suitable for business operations
Quality of Service (QoS)
•IEEE 802.1p prioritization
delivers data to devices, based on the priority and type of traffic
•DiffServ Code Point (DSCP) support
allows real-time traffic prioritization, based on L3 TOS/DSCP parameters
Warranty and support
•Limited Lifetime Warranty
HPE OfficeConnect 1420 Switch Series includes a Limited Lifetime Warranty. This warranty provides advance hardware replacement with next business day shipment in most countries, limited 24x7 telephone support available from HPE for the first 90 days, and limited electronic and business hours telephone support is available from HPE for the entire warranty period
Page 3
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HPE OfficeConnect 1420 24G Switch |
JG708B |
||
• |
24 |
RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U |
- Height |
Configuration |
|
|
|
NOTE:3 |
PDU Cable NA/MEX/TW/JP |
JG708B#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JG708B#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JG708B#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 5G Switch |
JH327A |
|
• |
5 RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U - Height |
Configuration |
|
|
NOTE:3 |
PDU Cable NA/MEX/TW/JP |
JH327A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH327A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH327A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 5G PoE+ (32W) Switch |
JH328A |
|
• |
5 RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U - Height |
Configuration |
|
|
NOTE:3 |
PDU Cable NA/MEX/TW/JP |
JH328A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH328A#B2C |
•C15 PDU Jumper Cord (ROW)
Page 4
QuickSpecs HPE OfficeConnect 1420 Switch Series
Configuration
High Volt Switch/Router to Wall Power Cord |
JH328A#B2E |
• NEMA L6-20P Cord (NA/MEX/JP/TW) |
|
HPE OfficeConnect 1420 8G Switch |
JH329A |
• 8 RJ-45 autosensing 10/100/1000 ports |
See |
• 1U - Height |
Configuration |
|
NOTE: 3 |
PDU Cable NA/MEX/TW/JP |
JH329A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH329A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH329A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 8G PoE+ (64W) Switch |
JH330A |
|
• |
8 RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U - Height |
Configuration |
|
|
NOTE: 3 |
PDU Cable NA/MEX/TW/JP |
JH330A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH330A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH330A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 16G Switch |
JH016A |
|
• |
16 RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U - Height |
Configuration |
|
|
NOTE: 3 |
PDU Cable NA/MEX/TW/JP |
JH016A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH016A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH016A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
Page 5
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
|
|
Configuration |
|
|
HPE OfficeConnect 1420 24G 2SFP Switch |
JH017A |
|
• 24 RJ-45 autosensing 10/100/1000 ports |
See |
|
• 2 SFP 100/1000 Mbps ports |
Configuration |
|
• |
min=0 \ max=2 SFP Transceivers |
NOTE:1, 3 |
• |
1U - Height |
|
PDU Cable NA/MEX/TW/JP |
JH017A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH017A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH017A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 24G 2SFP+ Switch |
JH018A |
|
• 24 RJ-45 autosensing 10/100/1000 ports |
See |
|
• |
2 fixed 1000/10000 SFP+ ports |
Configuration |
• |
min=0 \ max=2 SFP+ Transceivers |
NOTE: 1, 2 |
•1U - Height
PDU Cable NA/MEX/TW/JP |
JH018A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH018A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH018A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 24G PoE+ (124W) Switch |
JH019A |
||
• |
24 |
RJ-45 autosensing 10/100/1000 ports |
See |
• |
1U |
- Height |
Configuration |
|
|
|
NOTE: 3 |
PDU Cable NA/MEX/TW/JP |
JH019A#B2B |
•C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP |
JH019A#B2C |
•C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord |
JH019A#B2E |
•NEMA L6-20P Cord (NA/MEX/JP/TW)
Page 6
QuickSpecs HPE OfficeConnect 1420 Switch Series
Configuration
Configuration Rules: |
|
|
Note 1 |
The following Transceivers install into this switch: |
|
|
HPE X121 1G SFP LC SX Transceiver |
J4858C |
|
HPE X121 1G SFP LC LX Transceiver |
J4859C |
|
HPE X121 1G SFP RJ45 T Transceiver |
J8177C |
|
HPE X120 1G SFP RJ45 T Transceiver |
JD089B |
|
HPE X120 1G SFP LC SX Transceiver |
JD118B |
|
HPE X120 1G SFP LC LX Transceiver |
JD119B |
Note 2 |
The following Transceivers install into this switch: |
|
|
HPE X132 10G SFP+ LC SR Transceiver |
J9150A |
|
HPE X130 10G SFP+ LC SR Transceiver |
JD092B |
|
HPE X130 10G SFP+ LC LR Transceiver |
JD094B |
|
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable |
J9281B |
|
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
J9283B |
Note 3 |
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power |
|
|
Cord) or #B2E. (See Localization Menu) |
|
Transceivers
SFP Transceivers |
|
HPE X121 1G SFP LC SX Transceiver |
J4858C |
HPE X121 1G SFP LC LX Transceiver |
J4859C |
HPE X121 1G SFP RJ45 T Transceiver |
J8177C |
HPE X120 1G SFP RJ45 T Transceiver |
JD089B |
HPE X120 1G SFP LC SX Transceiver |
JD118B |
HPE X120 1G SFP LC LX Transceiver |
JD119B |
SFP+ Transceivers |
|
HPE X132 10G SFP+ LC SR Transceiver |
J9150A |
HPE X130 10G SFP+ LC SR Transceiver |
JD092B |
HPE X130 10G SFP+ LC LR Transceiver |
JD094B |
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable |
J9281B |
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
J9283B |
Internal or External Power Supplies (Model Dependant) |
|
Power Supplies included |
|
Cables
Page 7
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
Configuration |
|
Multi-Mode Cables |
|
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable |
AJ833A |
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable |
AJ834A |
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable |
AJ835A |
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable |
AJ836A |
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable |
AJ837A |
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable |
AJ838A |
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable |
AJ839A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable |
QK732A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable |
QK733A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable |
QK734A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable |
QK735A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable |
QK736A |
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable |
QK737A |
Page 8
QuickSpecs |
HPE OfficeConnect 1420 Switch Series |
|
|
HPE OfficeConnect 1420 16G Switch (JH016A)
I/O ports and slots 16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 16 autosensing 10/100/1000 ports
Physical characteristics |
Dimensions |
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height) |
|
Weight |
2.65 lb (1.2 kg) |
Memory and processor |
1 MB flash; Packet buffer size: 512 KB |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack (hardware included); Wall, desktop and under-table |
|
|
mounting |
|
Performance |
100 Mb Latency |
< 8 µs (LIFO 64-byte packets) |
|
1000 Mb Latency |
< 16 µs (LIFO 64-byte packets) |
|
Throughput |
up to 23.8 Mpps (64-byte packets) |
|
Switching capacity |
32 Gbps |
|
MAC address table size |
8192 entries |
Reliability |
MTBF (years) |
153.3 |
Environment |
Operating temperature |
32°F to 104°F (0°C to 40°C) |
|
Operating relative |
5% to 95%, noncondensing |
|
humidity |
|
|
Nonoperating/Storage |
-40°F to 158°F (-40°C to 70°C) |
|
temperature |
|
|
Nonoperating/Storage |
5% to 95%, noncondensing |
|
relative humidity |
|
|
Altitude |
up to 16,404 ft (5 km) |
|
Acoustic |
Power: 0 dB No fan |
Electrical characteristics |
Frequency |
50/60 Hz |
|
Voltage |
100 - 240 VAC, rated |
|
Current |
0.2 A |
|
Maximum power rating |
12 W |
|
Notes |
Maximum power rating and maximum heat dissipation are the worst- |
|
|
case theoretical maximum numbers provided for planning the |
|
|
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports |
|
|
plugged in, and all modules populated. |
|
|
This model provides internal power supply. Please select the correct |
|
|
power cord country option. |
Safety |
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1 |
|
Emissions |
FCC Rules Part 15, Subpart B Class A |
|
Immunity |
Generic |
EN 55022 CISPR 22 |
|
EN |
EN 55024, CISPR 24 |
|
ESD |
IEC 61000-4-2 |
Page 9
QuickSpecs |
|
HPE OfficeConnect 1420 Switch Series |
|
|
|
Technical Specifications |
|
|
|
Radiated |
IEC 61000-4-3 |
|
EFT/Burst |
IEC 61000-4-4 |
|
Surge |
IEC 61000-4-5 |
|
Conducted |
IEC 61000-4-6 |
|
Power frequency |
IEC 61000-4-8 |
|
magnetic field |
|
|
Voltage dips and |
IEC 61000-4-11 |
|
interruptions |
|
|
Harmonics |
IEC 61000-3-2 |
|
Flicker |
IEC 61000-3-3 |
Services |
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for |
|
|
details on the service-level descriptions and product numbers. For details about services and response |
|
|
times in your area, please contact your local Hewlett Packard Enterprise sales office. |
HPE OfficeConnect 1420 24G 2SFP Switch (JH017A)
I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP ports
Physical characteristics |
Dimensions |
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) |
|
Weight |
4.85 lb (2.2 kg) |
Memory and processor |
1 MB flash; Packet buffer size: 512 KB |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting |
|
Performance |
100 Mb Latency |
< 8 µs (LIFO 64-byte packets) |
|
1000 Mb Latency |
< 16 µs (LIFO 64-byte packets) |
|
Throughput |
up to 38.7 Mpps (64-byte packets) |
|
Switching capacity |
52 Gbps |
|
MAC address table size |
8192 entries |
Reliability |
MTBF (years) |
126.1 |
Environment |
Operating temperature |
32°F to 104°F (0°C to 40°C) |
|
Operating relative |
5% to 95%, noncondensing |
|
humidity |
|
|
Nonoperating/Storage |
-40°F to 158°F (-40°C to 70°C) |
|
temperature |
|
|
Nonoperating/Storage |
5% to 95%, noncondensing |
|
relative humidity |
|
|
Altitude |
up to 16,404 ft (5 km) |
|
Acoustic |
Power: 0 dB No fan |
Electrical characteristics |
Frequency |
50/60 Hz |
|
Voltage |
100 - 240 VAC, rated |
|
Current |
0.3 A |
Page 10
QuickSpecs |
|
HPE OfficeConnect 1420 Switch Series |
|
|
|
Technical Specifications |
|
|
|
Maximum power rating |
18 W |
|
Notes |
Maximum power rating and maximum heat dissipation are the worst-case |
|
|
theoretical maximum numbers provided for planning the infrastructure |
|
|
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all |
|
|
modules populated. |
|
|
This model provides internal power supply. Please select the correct power |
|
|
cord country option. |
Safety |
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1 |
|
Emissions |
FCC Rules Part 15, Subpart B Class A |
|
Immunity |
Generic |
EN 55022 CISPR 22 |
|
EN |
EN 55024, CISPR 24 |
|
ESD |
IEC 61000-4-2 |
|
Radiated |
IEC 61000-4-3 |
|
EFT/Burst |
IEC 61000-4-4 |
|
Surge |
IEC 61000-4-5 |
|
Conducted |
IEC 61000-4-6 |
|
Power frequency |
IEC 61000-4-8 |
|
magnetic field |
|
|
Voltage dips and |
IEC 61000-4-11 |
|
interruptions |
|
|
Harmonics |
IEC 61000-3-2 |
|
Flicker |
IEC 61000-3-3 |
Notes |
Use only supported genuine HPE transceivers with your switch. |
|
Services |
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for |
|
|
details on the service-level descriptions and product numbers. For details about services and response |
|
|
times in your area, please contact your local Hewlett Packard Enterprise sales office. |
HPE OfficeConnect 1420 24G 2SFP+ Switch (JH018A)
I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed 1000/10000 SFP+ ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP+ ports
Physical characteristics |
Dimensions |
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height) |
|
Weight |
6.39 lb (2.9 kg) |
Memory and processor |
8 MB flash; Packet buffer size: 1.5 MB |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting |
|
Performance |
100 Mb Latency |
< 8 µs (LIFO 64-byte packets) |
|
1000 Mb Latency |
< 16 µs (LIFO 64-byte packets) |
|
10 Gbps Latency |
< 2 µs (LIFO 64-byte packets) |
|
Throughput |
up to 65.5 Mpps (64-byte packets) |
|
Switching capacity |
88 Gbps |
|
MAC address table size |
16384 entries |
Page 11