HP 1280 User Manual

CISS for HP Deskjet 1280

Thanks for your purchasing our continuous ink system for HP Deskjet 1280. Our continuous ink system is
the idea set for inkjet printer which can low down the printing cost. Before your using of CISS, pls kindly
read the instruction with details. In this way, you can install this system without troubles then.

1.General Guide

1)components
A. CIS system 1 set B. Air filter 4pcs C. support arm 2 sets
D.Refill kit 4pcs E. Instruction CD 1pc F. pedestal for drawing air 1set

2) Opening box for inspection

a. Check whether all the accessories are ready

b. Check whether there is leakage of CIS system, whether the tubes has been separated from CISS.

2.Printer testing
Check whether the printer is in normal condition, such as mechanical status, lubrication
status etc. After installation of this system, it will not low down the printing precision,
so you have no need to worry about that.

3. Installation procedure:

1) first step

Put the CISS on the right side of the Open the air hole Place the air filter into the air hole,

printer,In the mean time, place all the make sure that the thicker side is down

tubes at correct position ( make sure the the tank

printer and ink tank should be in one level)

2) Set up the CISS system

Open the printer power Open the cover for the printer Ink vehicle out

Open the cover of the ink vehicle Put in the cartridges of CISS Cover the lid and make sure the

Put out the original cartridges cartridges are in the right position

3. Installation of the support arm

We have installed the support Put another short support arm in the Put the long support arm 3.5cm right to

arm in the cartridges middle of groove the short one and 10cm down.

Close the tubes to the support arm by clasp, and make sure the tubes are not contorted

4、Adjust he tubes

Pull out the power wire, then move move it to the left end pull the tubes straight, the tube can not

the Ink vehicle be that long or contorted.

Move the ink vehicle to the left, In the same way, move it to the right installation finished

whether there is baffle , whether it will hit anywhere