Hoymiles Converter Technology MI1200 User Manual
MICROINVERTER
User Manual
(Model: MI-1200 /MI-1000)
for North America
Rev 1.0
Microinverter user manual
Contact Information
Hoymiles Converter Technology Co., Ltd.
No.18 Kangjing Road, Hangzhou, Zhejiang Province, China
www.hoymiles.com
info@hzconverter.com
FCC Compliance
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of the
following measures:
which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance may void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. Under Industry
Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
1
Microinverter user manual
Le pr¨|sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autoris¨|e aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2
CONTENTS
Microinverter user manual
1. IMPORTANT SAFETY INFORMATION
...................................
1.1. SAFETY INSTRUCTIONS AND WARNINGS
1.2. SYMBOLIC INTERPRETATION
..........................................
1.3. PV RAPID SHUTDOWN EQUIPMENT (PVRSE)
2. INTRODUCTION
3. SYSTEM INSTALLATION
3.1. PREPARE FOR INSTALLING
3.2. ASSEMBLY INSTRUCTION
4. TECHNICAL DATA
..........................................................................
..........................................................
..............................................
.................................................
....................................................................
...................
............
4
4
5
6
7
9
9
9
14
5. INSTALLING DIAGRAM
6. INSTALLATION MAP
...............................................................
..........................................................
19
20
3
Microinverter user manual
4
1. IMPORTANT SAFETY INFORMATION
1.1. SAFETY INSTRUCTIONS AND WARNINGS
(1) Hoymiles microinverter must be installed and maintained by professionals
(2) Please read all the warnings and instructions in this manual and warning
(3) The AC side grid connection must be disconnected before installing and
(4) To avoid the risk of burns, do not touch the microinverter casing, the case
(5) The end connector of the AC feeder must be covered with a special
(6) Ensure that the DC input voltage is less than the maximum input voltage of
(7) Do not immerse the microinverter and connector in the liquid and expose it
(8) Do not try to repair Hoymiles microinverter by yourself. If there is a
Hoymiles Converter Technology Co., Ltd. (hereinafter referred to as Hoymiles)
MI-1200/ MI-1000 model microinverter (hereinafter referred to as microinverter)
is strictly designed and tested according to the national safety regulations.
However, the installation and maintenance must follow the instructions below.
Improper operation will cause serious damage to the operator and the third
party as well as property loss.
in accordance with local installation standards and regulations.
signs on the microinverter and PV modules before installing and
maintaining the Hoymiles microinverter.
maintaining the microinverter.
temperature can reach as high as 80°C.
waterproof cover.
the microinverter, otherwise the microinverter will be damaged, and
Hoymiles will not be responsible or warranted.
to the oriented, pressurized liquid (spray, etc.,).
breakdown, please contact Hoymiles customer services.
WARNING - These servicing instructions are for use by qualified personnel
only. To reduce the risk of electric shock, do not perform any servicing other
Microinverter user manual
5
1.2. SYMBOLIC INTERPRETATION
1) The safety symbols used in this manual are list below and illustrated in
Symbol
Usage
Indicates a dangerous situation that can result in
deadly electric shock hazards, other serious
physical injury, or fire hazards.
Indicates directions which must be fully
understood and followed in entirety in order to
avoid potential safety hazards including equipment
damage or personal injury.
This points out that the described operation must
not be carried out. The reader should stop, use
caution and fully understand the operations
explained before proceeding.
than that specified in the operating instructions.
CAUTION - To reduce the risk of fire, connect only to a circuit provided with
branch circuit overcurrent protection in accordance with the National Electrical
Code, ANSI/NFPA 70.
detail.
Loading...