Hoyles S1631 User Manual

Installation Instructions

6.35mm (1/4”) Jack Socket and Pillow Push

This instruction covers the following products:­S1732P Jack socket on a single gang plate
S1631 Pillow Push with Jack Plug

Jack socket is wired to present a closed circuit when the jack plug
is removed. If this feature is not required cut the wire link.

87.0

The pillow push is an open circuit device - contacts close when

87.0

18.0 18.0

The S1732P is supplied un-labelled. The decal (included) has a clear window 10mm x 46mm. The area under the decal is 12mm wide
to take standard labelling machine tape. The window is free from adhesive, nevertheless, it is wise to maintain cleanliness and avoid
fingerprints on the inside of the window. If a labelling machine is not
available a paper label can be used and examples are given below
complete with cutting and folding lines. If the text you require is not
shown here then it is a fairly simple matter to make one with a word
processing or graphics programme. The dimensions here are given to
help you. For a small extra charge the S1732 can be factory labelled to
your requirements (subject to a character limit)

pressed.

Extent of Clear Window

Fold

Extent of Clear Window

Text in this 10mm x 46mm area

Text in this 10mm x 46mm area

73.0

83.0

Fold

12.0

Fold

Fold

NURSE CALL

CALL

Fold

Fold

Before applying decal

fold paper label

Fold

WARDEN CALL

Fold

and insert
through slots

Fold

Fold

Fold

Fold

Fold

EMERGENCY

DO NOT REMOVE

Call for Assiatance

Fold

T

d

Fol

Fold

Fold

Fold

Fold

T

X

E

Fold

Fold

Hoyles Electronic Developments Ltd

T. 01744 886600 F. 01744 886607 E. [e-mail] W. www.hoyles.com

DWG: 60121.cdr iss1 Feb10