hoxter HAKA 63, HAKA 50, HAKA 37G, HAKA 50G, HAKA 51 User Manual
...
Use r
manUal
Fireplace inserts
Dear Client,
Thank you for purchasing the Hoxter fireplace insert – the best product
without compromises.
Hoxter is honoured to provide you with these fireplace inserts, which
arethe result of many years of research and development, extensive
market experience and intensive contact with customers.
You have chosen the best quality, durability and design which our
products provide.
We would like to thank you for your confidence and wish you many
pleasant and happy moments in the firelight of your fireplace.
Yours faithfully,
team Hoxter
CONTENTS
We reser ve the right for any technical changes, printing errors and differences in display.
You can find the original manual on www.hoxter.eu.
1. Safety 5
1.1. Safety instructions 5
1.2. Risk of burning 5
1.3. Safe distance 5
1.4. Putting into operation 6
1.5. Open operation 7
1.6. Fire in the chimney 7
1.7. Supply of combustion air 7
1.8. Unauthorized technical modifications 7
2. Fuel 8
2.1. Forbidden fuel 8
2.2. Permitted fuel 8
2.3. Types of wood 8
2.4. Storage of wood fuel 8
2.5. Recommended dose of fuel 10
3. Description of control elements 11
3.1. Description of control elements 11
3.2. Options for closing the door 12
4. Operation of fireplace inserts 12
4.1. Commissioning, burning phase and regulation of air supply 12
4.2. Operation with electronic burning regulation 14
4.3. Operation in the transient period 14
5. Cleaning and maintenance 14
5.1. Cleaning the glass 15
5.2. Removing ash 15
5.3. Cleaning the hot water exchanger 16
5.4. Regular specialist maintenance 16
6. What to do in the case of a defect 17
7. General warranty terms 18
7.1. Important information 18
7.2. Warranty conditions 18
7.3. Warranty period 18
7.4. Common wearing 19
7.5. Repair and maintenance 19
7.6. Making a claim 19
5
1. SAFETY
1.1. SAFETY INSTRUCTIONS
Carefully read these instructions for using the fireplace insert and keep the manual in a safe
place. Hoxter fireplace inserts are certified according to European standard EN 13229 and carry
theCE indication. When assembling the fireplace insert, you must comply with local regulations
andinstructions applicable to national and European standards. To ensure that your fireplace
operates correctly, the fireplace must be builded by a specialized company.
1.2. RISK OF BURNING
All the surfaces of fireplace insert are very hot when in operation. For servicing, use the attached
glove and:
- Always close the door even when fireplace is cold and only open it when starting fire, adding
wood or cleaning the insert.
- The door, handle and glass are hot when in operation – there is risk of burning!
- Do not leave children near the fireplace insert unsupervised.
1.3. SAFE DISTANCE
In the area where the fire is visible there is direct heat radiating, the minimum distance of 80
cm from flammable items must be kept (flammable parts of the construction, wood, furniture,
decorative textile, carpets, curtains, etc.). Outside the area of visibility of the fire, there must be a
minimum distance of 20 cm from flammable materials (flammable parts of the construction, wood,
furniture, decorative textile, carpets, curtains, etc.). The distance is measured from the glass in the
fireplace insert ( Fig. 1).
As a protection against flying sparks on flammable types of floors (carpet, wooden floor, cork, etc.)
there must be used a fire-proof layer (ceramics, stone, glass or metal) with minimum dimensions
(see Fig. 1). The distance is measured from the glass in the fireplace insert.
6
FIG. 1
1.4. PUTTING INTO OPERATION
Remove all attached documents and accessories from the fireplace. When first heating up the
fireplace insert, the high temperature resistant paint will dry and harden. This drying and hardening
is accompanied by a smell. The fumes are not toxic, but are unpleasant. Follow those rules:
- Open doors and windows in the room so that the area is fully ventilated.
- The first two batches of the fuel should correspond to the lower limit of the recommended
batch for the product (Chapter 2.5).
- The paint is soft during burning so do not touch it.
Commissioning the heat-carrying fireplace insert
Before heating, check that the following conditions are fulfilled:
- The fireplace insert is connected to the heating system.
- The heat-water exchanger is filled with water and de-aerated.
- Safety elements (safety valve, thermostatic valve) are installed and their function is verified.
- The thermostatic valve is connected to the fireplace insert with the pressure from
the water system by a minimum of 2 bars
1.5. OPEN OPERATION
Hoxter fireplace inserts are not designed to be operated with an open door. The fireplace must
always be closed with the exception of adding fuel so as to prevent burning wood falling out
andcombustion gases leaking into the room.
Loading...