Howard McCray 100-1S-5 User Manual
Step-In-Freezers
• PRODUCT SPECIFICATIONS SHEETS
• Specification subject to change without notice
Self-Contained 100-1S-5 140-1S-5 150-1S-5
Remote R-100-1S-5 R-140-1S-5 R-150-1S-5
Length 48" 66-1/2" 48"
Height W/condensing unit 93" 93" 93"
Height W/O condensing unit 75" 75" 75"
Depth 60" 60" 90"
Sections 223
(Dimensions are +/-1/4")
* Shown with optional outdoor cover
Step-In-Freezers
Standard Specifications and Optional Features
OPTIONAL FEATURES
A Division of HMC Enterprises LLC • 2501 Grant Avenue • Philadelphia, PA 19114 USA
(215) 464-6800 • 1-800-344-8222 • Fax (215) 969-4890 • E-Mail: sales@howardmccray.com • www.howardmccray.com
UL Classified to ANSI/NSF 7
Embossed aluminum
Two or three section connection for easy installation
CFC free foamed in place insulation
Heavy duty hardware
Cam lock technology
Embossed aluminum
CONSTRUCTION FINISHES
INTERIOR REFRIGERATION
EXTERIOR CUBIC CAPACITY
ELECTRICAL REQUIREMENTS
Embossed aluminum
Heavy gauge re-enforced floor
Evaporator installed inside unit
R404A refrigerant system
Refrigeration system factory installed and charged
External drain required or condensate pan
Condensing unit
Temperature control - 100 series units only
Pressure control - 140 and 150 series units
Embossed aluminum
Heavy duty door handle (horizontally mounted to
prevent carts from breaking it)
Edge mounted hinges (makes door easy to remove
for cleaning and loading)
100-IS 98 Cubic Feet
140-IS 135 Cubic Feet
150-IS 145 Cubic Feet
115V/208-230V/60Hz/1Ph
Hard wired required
UL/CUL listed
Condensate pan
Diamond plate floor
Roll-In ramp
Shelf racks
Side mounted condensing units
Door opening hood, outdoor use
Compressor hood, outdoor use
IMPORTANT NOTE: DRAIN OR CONDENSATE
PAN IS REQUIRED
Loading...