Howard Industries MWP-70-HPS-120 Specifications

Specification Sheet

3/22/2015

Project:

Medium Wallpack

HPS / 50 - 150 watts | PS / 70 - 150 watts | CF / 84 watts

Applications

Great for lighting parking facilities, entry ways, perimeters, pathways,

and underpasses

Features

• Die-cast aluminum housing with hinged door frame (lamp

included)

• Textured bronze nish with Borosilicate molded glass lens

HID/CFL Fixtures

• 1/2” conduit access, sides, top, or rear knockouts

• Photocell adaptable and UL listed for wet locations

RAPID SHIP MODELS
AVAILABLE FOR NEXT DAY SHIPMENT

•MWP-150-HPS-4T

•MWP-150-PS-4T

•MWP-100-MH-4T

•MWP-70-MH-4T

•MWP-84-CF-MV

ORDERING INFORMATION

Catalog # Watts Volts † Ballast ANSI Lamp Part #

MWP-84-CF-MV 84 CF MV CF - CF42TE/827(2)
MWP-50-HPS-120 50 HPS 120 R-NPF S68 LU50/MED
MWP-70-HPS-120 70 HPS 120 R-NPF S62 LU70/MED

MWP-70-HPS-4T 70 HPS 4T HX-HPF S62 LU70/MED

MWP-100-HPS-120 100 HPS 120 R-NPF S54 LU100/MED

MWP-100-HPS-4T 100 HPS 4T HX-HPF S54 LU100/MED

MWP-150-HPS-120 150 HPS 120 R-NPF S55 LU150/55/MED

MWP-150-HPS-4T 150 HPS 4T HX-HPF S55 LU150/55/MED

MWP-70-MH-4T 70 PSMH 4T HX-HPF M98/E MH70/U/MED

MWP-100-MH-2T 100 PSMH 2T HX-HPF M90/E MH100/U/MED
MWP-100-MH-4T 100 PSMH 4T HX-HPF M90/E MH100/U/MED

MWP-150-PS-4T 150 PSMH 4T HX-HPF M102/E MH150/U/MED

ACCESSORIES (sold separately)

Catalog # Description

EPCMV External mount photocontrol - 120/208/240/277 multivolt

MWP-GF-100 Replacement glass lens and door frame

MWPWG Wire guard with stainless steel construction

MWPSC Side cutoff with textured bronze finish
MWPVG Clear polycarbonate vandal guard

Catalog#:

Approved by:

DIMENSIONS

14.2"

7.13”

2T = 120, 277 volts (pre-wired to 277)

†

MV = 120-277 Universal Input
4T = 120, 208, 240, 277 volts (pre-wired to 277)
5T = 120, 208, 240, 277, 480 volts (pre-wired to 277)
120 = 120 volts
480 = 480 volts
Pre-wiring to any specific voltage is available upon request

Specifications subject to change without notice.

9.29”

PHOTOMETRICS

150W PSMH @ 15’ Mounting Height

Isofootcandles

Circle E logo indicates that this
product complies with federal
energy efficiency requirements.

Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443

(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652

www.HowardLightingProducts.com