Occupancy sensor
is inside the fixture,
not coming out of
the ends.
Applications
Warehouse
Manufacturing
Facility
Features
• Heavy Duty pre-painted steel construction
• Easy access to wiring compartment & ballast
• Access plate provides access to electrical wiring without the
need to open the fixture
• Factory installed lamp option available
• Choice of 86% Standard Specular Aluminum Reflec-tor (A),
95% Specular Enhanced Aluminum Reflector (E) or 91%
White Reflector (W) (See our detailed reflector option table)
• Choice of standard or high efficiency designs
• Choice of 10% uplight or no uplight
• Factory Installed Integral Occupancy Sensor option - Occ
Sensor is inside the fixture and does not extend from the end
of the fixture
• Factory Installed Emergency ballast option*
• Factory Installed Toggle Switch*
• Factory Installed Wireguard option
• Custom configurations available
• Can be easily mounted by a single person
• Suspended mounting insures a quick painless install
• Chain and V-Clip Hanging option
• Wire cable hanging option
• Special wiring available upon request
• Multiple supply cord options Cords/Cord sets are connected
to access plate
• UL Listed for Damp Locations
*Not available in all configurations - Consult Factory before ordering.
Cafeteria
Auditorium
Gymnasium
Project:
Catalog#:
Approved by:
Description
HIB series high-bay fluorescent fixture is a great
energy saving alternative to traditional HID
high-bay fixtures. This fixture operates two to
ten lamps and has a low profile design. HIB has
multiple reflector options for your application.
Benefits
• Energy Savings Compared to HID systems
• Exceptional Color Rendering
• High System Efficiency
• Long Lamp Life
• Instant On/Re-strike Capability
• Quality Lamp Holders
• Computer Designed Reflectors
• System Tested, Designed, Approved, and
Manufactured by Howard Industries in
Mendenhall Mississippi.
• Compliant with Safety and performance
standards.
2.43”
DIM A
Dimension A
(Width in inches)
2 Lamps*8.90”
4 Lamps13.25”
6 Lamps16.30”
8 Lamps*24.10”
10 Lamps*24.10”
Reector
(multiple options)
Low Prole
Design
Access Plate
Easy Access Ballast Compartment
48”
Available with surface mount
occupancy sensor
Holes for “v-clip”
or wire-cable
hanging kit
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
1. 10 Lamp Configuration available in HEMV, P8MV, or PSMV only.
2. T8 Programmed Rapid Start recommended only in the case of frequent switching
(as with an occupancy sensor). Instant Start T8 is appropriate for most ordinary applications.
3. Allows hook-up of standard MV ballast to 480V, may not fit with all ballast options.
Available with 2, 4, and 6-lamp fixtures only.
4. Occupancy Sensors should only be used with programmed rapid start ballasts.Standard
Occupancy Sensor requires neutral wired fixtures (ex. - 120v or 277v). For phase-to-phase voltage
applications (240v) advise Customer Service at time of request.
5. 500 Lumen ballast is standard for T8. 120 or 277v input only. Advise Customer Service at time of
quote for higher lumen rated ballast. Not available in all configurations - Consult Factory before
ordering.
6. Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control. 120 or 277v control only;
default wired for 277v; specify 120v wiring at time of order if applicable. Not available in all
configurations - Consult Factory before ordering.
Page 3
Highbay Fluorescent
Specification Sheet
5/29/2013
Table 1: Fixture Efficiency
2 LAMP
Dist
Highbay
Highbay
High eff.
Highbay
10% uplight
Highbay
High eff.
10% uplight
Wide Dist.
High eff.
Wide Dist.
High eff.
10% uplight
TypeAEW
H
F
U
T
W
Y
T8NANANA
T5NANANA
T8869184
T5889387
T8NANANA
T5NANANA
T8889388
T5909589
T8788683
T5818885
T8828986
T5849188
Standard Reflector Option
Table 2: Fixture Efficiency
Dist
Highbay
Highbay
High eff.
Highbay
10% uplight
Highbay
High eff.
10% uplight
Wide Dist.
High eff.
Wide Dist.
High eff.
10% uplight
TypeAEW
H
F
U
T
W
Y
T8859085
T5869185
T8869185
T5899488
T8889389
T5909491
T8889388
T5919591
T8808785
T5849188
T8848987
T5869289
Standard Reflector Option
HIB Series
4 LAMP
Project:
Table 3: Fixture Efficiency
Catalog#:
Dist
Highbay
Highbay
High eff.
Highbay
10% uplight
Highbay
High eff.
10% uplight
Wide Dist.
High eff.
Wide Dist.
High eff.
10% uplight
TypeAEW
T8828883
Approved by:
H
U
W
T5869288
T8848983
F
T5889387
T8869087
T5899390
T
T8879187
T5919590
T8798583
T5838987
Y
T8838886
T5879290
Standard Reflector Option
6 LAMP
Table 4: Fixture Efficiency
8 LAMP
Dist
Highbay
Highbay
High eff.
Highbay
10% uplight
Highbay
High eff.
10% uplight
Wide Dist.
High eff.
Wide Dist.
High eff.
10% uplight
TypeAEW
H
F
U
T
W
Y
T8838884
T5869288
T8849084
T5899488
T8869087
T5899391
T8889287
T5919591
T8808694
T5849088
T8848987
T5879290
Standard Reflector Option
Energy Cost Estimator
Hours
burned
per year
Cost per
kWh$
Energy Cost
Estimation
4368
0.12
Table 5: Fixture Efficiency
Dist
Highbay
Highbay
High eff.
Highbay
10% uplight
Highbay
High eff.
10% uplight
Wide Dist.
High eff.
Wide Dist.
High eff.
10% uplight
TypeAEW
H
F
U
T
W
Y
T8788481
T5849087
T8808680
T5879286
T8828784
T5879289
T8848884
T5899489
T8778380
T5838986
T8818584
T5869088
Standard Reflector Option
Existing SystemNew System
HIBE454APS
400W MH Highbay
Program Start T5 Ballast
Fluorescent Highbay
Number
of Fixtures
Watts per
Fixture
(existing
system)
Energy
used
per year
(existing
system)
Energy saving per
year (per fixture)
458
$240
1
Number of
Fixtures
Watts per
Fixture
(new
system)
Energy
used per
year (new
system)
$117.00
10 LAMP
1
234
$123
$250
$200
$150
$100
$50
$0
Field Installed Options
HIB WG
Wireguard
HF-2CV (2 foot)
HF-3CV (3 foot)
Hanging Chain & V-clips
HF-WCH
Wire Cable Hanging Kit
(2 pcs per kit)
49% Annual Savings
$240$123
Existing SystemNew System
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443