Specification Sheet
2/22/2015
HFLP 4-Lamp Series
Highbay Fluorescent - Four Lamp T5
Low Profile Design
Applications
Warehouse
Manufacturing
Facility
Features
• Easy access ballast through removal of 1 screw and snap out
reflector
• Access plate provides access to electrical wiring without the
need to open the fixture
• Knock-outs for easy electrical wiring and assembly
• Factory Installed Occupancy Sensor option
• Lamp Installation option available
• Multiple power cord set options, (voltage, length, gage)
• Choice of 86% Standard Specular Aluminum Reflector,
95% Specular Enhanced Aluminum Reflector or 91% White
Reflector
• Heavy Duty pre-painted steel construction
• Can be easily mounted by a single person
• Chain and V-Clip Hanging option
• Wire cable hanging option.
• UL Listed for Damp Locations
Cafeteria
Auditorium
2.561”
1.557”
11.080”
Project:
Catalog#:
Approved by:
Description
HFLP series high-bay fluorescent fixture is a
great energy saving alternative to traditional
HID highbay fixtures. This fixture is optimized for
maximum efficiency using T5 lamps.
Benefits
• Energy Saving Compared to HID systems
• Exceptional Color Rendering
• High System Efficiency
• Long Lamp Life
• Instant On/Re-strike Capability
• Howard Ballast and Howard Lamp as a
system is covered by Howard Industries
Warranty
• Quality Lamp holders
• Computer Designed Reflectors
• System Tested, Designed, Approved, and
Manufactured by Howard Industries in
Mendenhall Mississippi.
• Compliant with Safety and performance
standards.
Holes for Cable Hanging
Access Plate with Knockout Options
Holes for V-clip
Hanging Option
46.300”
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
HFLP 4-Lamp Series
Highbay Fluorescent - Four Lamp T5
Low Profile Design
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
HFLP E 4 54 A PS MV 00A 07 0 I
HFLP E: Enhanced
Reflector
Specular
Aluminum (95%)
A: Specular
Aluminum (86%)
W: White
reflective (91%)
No. of
Lamps
4 T5 Lamps
Lamp Type/
Wattage
54: F54T5HO
CRI/CCT Ballast Input Volts Factory Installed
(1)
A: No Lamps PS: PRS T5 MV: 120-277v
CRI CCT
F:
85
G:
H:
3000
85
3500
85
4100
I:
85
5000
J:
85
6500
HV: 347-480v
000: No FIOs
A: Occ Sensor
I: Special Wiring
Instructions
Options
(2) (3)
Cordset Options
00: Standard Disconnect
01: 6’ SJT 18/3, no plug
02: 10’ SJT 18/3, no plug
03: 6’ SJT 18/3 L5-15, twist lock 120v
04: 10’ SJT 18/3 L5-15twist lock 120v
05: 6’ SJT 18/3 5-15non twist lock 120v
06: 10’ SJT 18/3 5-15non twist lock 120v
07: 6’ SJT 18/3 L7-15 twist lock 277v
08: 10’ SJT 18/3 L7-15 twist lock 277v
11: 16/3, no plug specify length
17: 18/3, no plug specify length
22: 6’ SJT 16/3 L7-20 twist lock 277v
23: 6’ SJT 18/3 L6-15 twist lock 240v
*Other cordsets available, consult
customer service
T
B
A
Pack.
I: Single
B: Bulk
(3)
(1) Lamp installation available.
(2) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(3) Bulk packaging is not available when occupancy sensor is ordered as a Factory Installed Option
PS Program Rapid Start T5 Ballast
Specifications subject to change without notice.
Sample Ordering Number:
HFLP E 4 54 A PS MV 00A 07 I
HFLP Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
4-lamps (none installed)
F54T5HO Program Rapid Start Ballast
Multi-volt (120-277v)
Factory Installed Occupancy Sensor
6’ SJT 18/3 L7-15 twist lock 277v Cordset
Single Packaging
RAPID SHIP MODEL
AVAILABLE FOR NEXT DAY SHIPMENT
•HFLPE454APSMV000000I
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com