Howard Industries HFC1 Series Specifications
Specification Sheet
Pendant Mount lances included only if
Factory Installed Option “J” is selected.
4/9/2014
HFC1 Series
Highbay Fluorescent - Eight Lamp
Flat Profile Design
Highbay Fluorescent
Applications
Warehouse
Manufacturing
Facility
Features
• Easy access to wiring compartment & ballast
• Access plate provides access to electrical wiring with-out the
need to open the fixture
• Knock-outs for easy electrical wiring and assembly
• Factory Installed Occupancy Sensor option
• Factory Installed Emergency ballast option
• Lamp Installation option available
• Multiple power cord set options, (voltage, length, gage)
• Pendant mount kit provides a top J-box to simplify HID
retrofit installations. Can be used with a hook or rigid conduit
and fasteners (Fixture must be specified with “J” option)
• Door and lens kit options available
• Choice of 86% Standard Specular Aluminum Reflector,
95% Specular Enhanced Aluminum Reflector or 91% White
Reflector
• Heavy Duty pre-painted steel construction
• Factory Installed Wireguard option
• Custom configurations available
• Can be easily mounted by a single person
• Suspended or Pendant mounting insures a quick painless
install
• Chain and V-Clip Hanging option
• Wire cable hanging option.
• UL Listed for Damp Locations
Gymnasium
Cafeteria
Auditorium
Project:
Catalog#:
Approved by:
Description
HFC1 series high-bay fluorescent fixture is a great
energy saving alternative to traditional HID highbay fixtures. This fixture operates eight lamps
and as a standard feature comes equipped with
Howard ballasts.
Benefits
• Energy Saving Compared to HID systems
• Exceptional Color Rendering
• High System Efficacy
• Long Lamp Life
• Instant On/Re-strike Capability
• Howard Ballast and Howard Lamp as a
system is covered by Howard Industries
Warranty
• Quality Lamp holders
• Computer Designed Reflectors
• System Tested, Designed, Approved, and
Manufactured by Howard Industries in
Mendenhall Mississippi.
• Compliant with Safety and performance
standards.
Holes for “V” clip
& chain hanging
48”
Access plate
5.5”
Cable hanging
Factory Installed Option J
Pendant Mount Kit (PMK2)
installs from the outside: no
need to open the fixture
19.875”
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
HFC1 Series
Highbay Fluorescent - Eight Lamp
Flat Profile Design
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
Highbay Fluorescent
HFC1 E 8 32 A SE MV OCJ 01 0 I
HFC1 E: Enhanced
Reflector
Specular
Aluminum (95%)
A: Specular
Aluminum (86%)
W: White
reflective (91%)
No. of
Lamps
8 T8 Lamps
Lamp Type/
Wattage
28: F28T8
32: F32T8
T5 Lamps
28:F28T5
54: F54T5HO
(1)
A: No Lamps
B:
C:
D:
E:
F:
G:
H:
J:
K:
L:
M:
N:
CRI/CCT Ballast Input Volts Factory Installed
CRI CCT
75
75
75
75
85
85
85
I:
85
85
85
85
85
85
3000
3500
4100
5000
3000
3500
4100
5000
6500
3000
3500
4100
5000
High
Lumen
Yes
Yes
Yes
Yes
T8 T5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SE: SBF High Eff
HE: HBF High Eff
LE: LBF High Eff
PS: PRS T5
P8: PRS T8
(2)
MV: 120-277v
(2)
HV: 347-480v
(2)
(T5HO)
AX: 480-277
(2)
000: No FIOs
A: Occ Sensor
B: Emergency Ballast
(3)
C: Door W/Lens &
Safety Cable
D: Door W/Lens
G: Wireguard
I: Special Wiring
Instructions
J: J-box config.
T: Toggle switch bilevel lighting control
Options
(6)
Cordset Options
(consult customer service
for other corset options)
(4)
00: Standard Disconnect
01: 6’ SJT 18/3, no plug
(5)
02: 10’ SJT 18/3, no plug
03: 6’ SJT 18/3 L5-15, twist lock 120v
04: 10’ SJT 18/3 L5-15twist lock 120v
(6)
05: 6’ SJT 18/3 5-15non twist lock 120v
06: 10’ SJT 18/3 5-15non twist lock 120v
07: 6’ SJT 18/3 L7-15 twist lock 277v
08: 10’ SJT 18/3 L7-15 twist lock 277v
(7)
09: 6’ SJT 7-15 non twist lock 277v
10: 10’ SJT 7-15 non twist lock 277v
(8)
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’ SJT 18/3 7-15, non twist lock 277v
17: 18/3, no plug spec len
18: 6’ STW L8-20, twist lock 480v
19: 10’ STW L8-20, twist lock 480v
20: 16’ SJT 18/3 L5-15, twist lock 120v
21: 16’ SJT 18/3 L5-15, twist lock 277v
T
B
A
Pack.
I: Single
B: Bulk
(1) Lamp installation available.
(2) High Efficiency ballasts are CEE Listed.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not the
access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
SE Standard Ballast Factor High Efficiency Instant Start T8 Ballast
HE High Ballast Factor High Efficiency Instant Start T8 Ballast
LE Low Ballast Factor High Efficiency Instant Start T8 Ballast
PS Program Rapid Start T5 Ballast
P8 Program Rapid Start High Efficiency T8 Ballast
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Sample Ordering Number:
HFC1 E 8 32 A SE MV 000 01 I
HFC1 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
8-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
6’ SJT 18/3 cord, no plug
Single Packaging
Loading...