Howard Industries HFB3 Series Specifications

Page 1
Specification Sheet
Pendant Mount lances included only if Factory Installed Option “J” is selected.
2/22/2015
HFB3 Series
Highbay Fluorescent - 3 or 4 Lamp
Curved Profile Design
Highbay Fluorescent
Applications
Warehouse Manufacturing
Facility
Features
• Easy access to wiring compartment & ballast
• Access plate provides access to electrical wiring with-out the
need to open the fixture
• Knock-outs for easy electrical wiring and assembly
• Factory Installed Occupancy Sensor option
• Factory Installed Emergency ballast option
• Factory Installed Wrap Lens option
• Lamp Installation option available
• Multiple power cord set options, (voltage, length, gage)
• Pendant mount kit provides a top J-box to simplify HID
retrofit installations. Can be used with a hook or rigid conduit and fasteners (Fixture must be specified with “J” option)
• Choice of 86% Standard Specular Aluminum Reflector, 95% Specular Enhanced Aluminum Reflector or 91% White Reflector
• Heavy Duty pre-painted steel construction
• Wireguard available (not factory installed)
• Custom configurations available
• Can be easily mounted by a single person
• Suspended or Pendant mounting insures a quick painless
install
• Chain and V-Clip Hanging option
• Wire cable hanging option.
• UL Listed for Damp Locations
Gymnasium Cafeteria Auditorium
Project:
Catalog#:
Approved by:
Description
HFB3 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID highbay fixtures. This fixture operates three or four lamps and as a standard feature comes equipped with Howard ballasts.
Benefits
• Energy Saving Compared to HID systems
• Exceptional Color Rendering
• High System Efficacy
• Long Lamp Life
• Instant On/Re-strike Capability
• Howard Ballast and Howard Lamp as a
system is covered by Howard Industries Warranty
• Quality Lamp holders
• Computer Designed Reflectors
• System Tested, Designed, Approved, and
Manufactured by Howard Industries in Mendenhall Mississippi.
• Compliant with Safety and performance standards.
Rigid heavy gage prepainted steel body
Curved design for better light distribution
3.6”
13.0”
Six 3/4” knockouts for easy wiring access 4 on top and one on each end provides clean mounting for occupancy sensor
Chain and V-Clip mounting option (CV)
48”
Factory Installed Option J Pendant Mount Kit (PMK2) installs from the outside: no need to open the fixture
Wire Cable Hanging mounting option (WCH)
Contractor friendly one screw access to electrical connections through this access plate removable from the outside
Hinged reflector/socket bar assembly for easy two screw access to the ballast compartment
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 2
Specification Sheet
HFB3 Series
Highbay Fluorescent - 3 or 4 Lamp
Curved Profile Design
Project:
Catalog#:
Approved by:
Ordering Information
Model Family
Highbay Fluorescent
HFB3 E 4 32 A P8 MV 00A 07 0 I
HFB3 E: Enhanced
Reflector
Specular Aluminum (95%)
A: Specular Aluminum (86%)
W: White reflective (91%)
No. of Lamps
3
4
Lamp Type/
Wattage
T8 Lamps
28: F28T8 32: F32T8
T5 Lamps
28:F28T5 54: F54T5HO
(1)
A: No Lamps
B: C:
D:
E:
F: G: H:
J:
K:
L:
M:
N:
CRI/CCT Ballast Input Volts Factory Installed
CRI CCT
75 75 75 75 85 85 85
I:
85 85 85 85 85 85
3000 3500 4100 5000 3000 3500 4100 5000 6500 3000 3500 4100 5000
High
Lumen
Yes Yes Yes Yes
T8 T5
X X X X X X X X
X X X X
X X X X X
SE: SBF High Eff HE: HBF High Eff LE: LBF High Eff
PS: PRS T5 P8: PRS T8
(2)
MV: 120-277v
(2)
HV: 347-480v
(2)
(T5HO) AX: 480-277
(2)
000: No FIOs A: Occ Sensor B: Emergency Ballast
(3)
D: Wrap Lens I: Special Wiring Instructions J: J-box config. T: Toggle switch bi­level lighting control
Options
(6)
Cordset Options
(consult customer service for
other cordset options)
(4)
00: Standard Disconnect 01: 6’ SJT 18/3, no plug
(5)
02: 10’ SJT 18/3, no plug 03: 6’ SJT 18/3 L5-15, twist lock 120v 04: 10’ SJT 18/3 L5-15twist lock 120v 05: 6’ SJT 18/3 5-15non twist lock 120v
(7)
06: 10’ SJT 18/3 5-15non twist lock 120v 07: 6’ SJT 18/3 L7-15 twist lock 277v
(8)
08: 10’ SJT 18/3 L7-15 twist lock 277v 09: 6’ SJT 7-15 non twist lock 277v 10: 10’ SJT 7-15 non twist lock 277v 11: 16/3, no plug spec len 12: 16/4, no plug spec len 16: 16’ SJT 18/3 7-15, non twist lock 277v 17: 18/3, no plug spec len 18: 6’ STW L8-20, twist lock 480v 19: 10’ STW L8-20, twist lock 480v 20: 16’ SJT 18/3 L5-15, twist lock 120v 21: 16’ SJT 18/3 L5-15, twist lock 277v
T B A
Pack.
I: Single B: Bulk
(1) Lamp installation available. (2) High Efficiency ballasts are CEE Listed. (3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v. (4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life. Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v). For phase-to-phase voltage applications (240v) advise Customer Service at time of request. (5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. (6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options. (7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not the access plate. J-box can be installed without entering the fixture. (8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch. Recommend use of programmed rapid start ballast with this control.
SE Standard Ballast Factor High Efficiency Instant Start T8 Ballast
HE High Ballast Factor High Efficiency Instant Start T8 Ballast
LE Low Ballast Factor High Efficiency Instant Start T8 Ballast
PS Program Rapid Start T5 Ballast
P8 Program Rapid Start High Efficiency T8 Ballast
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Sample Ordering Number: HFB3 E 4 32 A P8 MV 00A 07 I
HFB3 Series Highbay Fluorescent Enhanced Specular Aluminum Reflector 4-lamps (none installed) F32T8 Program Rapid Start High Efficiency Ballast Multi-volt (120-277v) Occupancy Factory Installed Options 6’ SJT 18/3 cord L7-15 277v twist lock plug Single Packaging
RAPID SHIP MODELS AVAILABLE FOR NEXT DAY SHIPMENT
•HFB3E432AHEMV000000I
•HFB3E454APSMV000000I
•HFB3E454IPSMV000020I (with lamps & cordset)
Page 3
Specification Sheet
2/22/2015
HFB3 Series
Project:
Field Installed Options Ordering
Highbay Fluorescent
HFB3-WG
Wire Guard
HF-2CV (2 foot) HF-3CV (3 foot)
Hanging Chain & V-clips
HFA-WCH
Wire Cable Hanging Kit
(2 pcs per kit)
HF-SK1
Stabilizer Kit
(Hub, color and wire cable)
Catalog#:
Approved by:
HF-PMK2
Pendant Mount Kit
with 1.0” diameter through hole
HFB3-WL
Wrap Lens
Energy Cost Estimator
Existing System New System
250W MH Highbay
Hours
burned
per year
Cost per
kWh$
4368
0.12
Energy Cost
Estimation
Number
of Fixtures
Watts per
Fixture
(existing
system)
Energy
used per year (existing
system)
Energy saving per
year (per fixture)
HFB3E432AP8
Prog. Start High Eff
Fluorescent Highbay
$250
Number of
1
272
$143
Fixtures
Watts per
Fixture
(new
system)
Energy
used per
year (new
system)
1
112
$59
$200
$150
$100
$50
$0
$84.00
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
59% Annual Savings
$143 $59
Existing System New System
Page 4
Specification Sheet
2/22/2015
HFB3 Series
Project:
Photometric Data - 4 Lamp T8 (HFB3E432)
Candela Polar Plot
Highbay Fluorescent
Catalog#:
Approved by:
Luminaire Efficiencies*
Reflector Type T8
Enhanced Specular 90.9% Specular 84% White 85%
*Luminaire efficiency is the ratio of light output emitted by the luminaire to the light output emitted by its lamps.
Zonal Lumen Summary
Zone Lumens %Lamp %Fix
0-30 2796.29 24.10 26.50
0-40 4443.61 38.30 42.10
0-60 7633.57 65.80 72.40
0-90 10415.48 89.80 110
0-180 10544.8 90.90 100.00
HFB3E432 Test Report: HFB3E432.ies Spacing Criteria (0-180): 1.28 Spacing Criteria (90-270): 1.12 Spacing Criteria (Diagnonal): 1.30
Maximum Candela = 3798.24
Located at Horizontal Angle = 70, Vertical Angle = 5 #1 = Vertical Plane Through Horizontal Angles (70-250) Through Max Cd. #2 = Vertical Plane Through Horizontal Angles (45-225) #3 = Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
Luminance Data (cd/Sq.m)
Angle In Degrees
45 7999 5689 5384
55 7517 5036 6938
65 6806 5279 5798
75 5619 4965 5566
Average 0-deg
85 2854 3142 3597
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 0.20
RC 80 70 50 30 10 0
RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
0 107 107 107 107 105 105 105 105 100 100 100 96 96 96 92 92 92 90
1 96 92 87 83 94 90 86 82 86 82 79 82 79 77 79 77 75 73
2 87 79 73 67 85 77 71 66 74 69 65 71 67 63 68 65 62 60
3 79 69 61 55 77 68 61 55 65 59 54 63 57 53 60 56 52 50
4 73 61 53 47 70 60 52 46 58 51 46 56 50 45 54 49 44 42
5 67 55 46 40 65 54 46 40 52 45 39 50 44 39 48 43 39 37
6 62 49 41 35 60 48 41 35 47 40 35 45 39 34 44 38 34 32
7 57 45 37 31 56 44 36 31 43 36 31 41 35 30 40 34 30 28
8 53 41 33 28 52 40 33 28 39 32 27 38 32 27 37 31 27 25
9 50 38 30 25 49 37 30 25 36 29 25 35 29 25 34 29 25 23
10 47 35 28 23 46 34 27 23 33 27 23 33 27 22 32 26 22 21
Average 45-deg
Average 90-deg
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 5
Specification Sheet
2/22/2015
HFB3 Series
Project:
Photometric Data - 4 Lamp T5 (HFB3E454)
Candela Polar Plot
Highbay Fluorescent
Catalog#:
Approved by:
Luminaire Efficiencies*
Reflector Type T5
Enhanced Specular 93% Specular 88% White 88%
*Luminaire efficiency is the ratio of light output emitted by the luminaire to the light output emitted by its lamps.
Zonal Lumen Summary
Zone Lumens %Lamp %Fix
0-30 5018.63 25.10 26.90
0-40 8217.01 41.10 44.00
0-60 14314.51 71.60 76.60
0-90 18683.6 93.40 100.00
0-180 18683.6 93.40 100.00
HFB3E454 Test Report: HFB3-454-MOD.ies Spacing Criteria (0-180): 1.26 Spacing Criteria (90-270): 1.30 Spacing Criteria (Diagnonal): 1.40
Maximum Candela = 6505.34
Located at Horizontal Angle = 60, Vertical Angle = 10 #1 = Vertical Plane Through Horizontal Angles (60-240) Through Max Cd. #2 = Vertical Plane Through Horizontal Angles (45-225) #3 = Horizontal Cone Through Vertical Angle (10) (Through Max. Cd.)
Luminance Data (cd/Sq.m)
Angle In Degrees
45 15860 15289 14862
55 14682 13909 12227
65 13288 11505 13835
75 11396 12493 12773
Average 0-deg
85 9001 7421 7403
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 0.20
RC 80 70 50 30 10 0
RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
0 111 111 111 111 109 109 109 109 104 104 104 99 99 99 95 95 95 93
1 101 96 92 88 98 94 90 87 90 87 84 84 86 81 83 81 79 77
2 92 84 77 71 89 82 76 70 78 73 69 75 71 67 72 69 66 64
3 83 73 65 59 81 72 64 59 69 63 58 66 61 57 64 59 56 53
4 76 65 56 50 74 64 56 50 61 54 49 59 53 48 57 52 48 46
5 70 58 49 43 68 57 49 43 55 48 42 53 47 42 51 46 41 39
6 65 52 44 38 63 51 43 37 50 42 37 48 42 37 46 41 36 34
7 60 47 39 33 58 47 39 33 45 38 33 44 37 33 42 37 32 30
8 56 43 35 30 54 42 35 29 41 34 29 40 34 29 39 33 29 27
9 52 40 32 27 51 39 32 27 38 31 26 37 31 26 36 30 26 24
10 49 37 29 24 48 36 29 24 35 28 24 34 28 24 33 28 24 22
Average 45-deg
Average 90-deg
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Loading...