Pendant Mount lances included only if
Factory Installed Option “J” is selected.
2/22/2015
HFA1 Series
Highbay Fluorescent - Six Lamp
Flat Profile Design
Highbay Fluorescent
Applications
Warehouse
Manufacturing
Facility
Features
• Easy access to wiring compartment & ballast
• Access plate provides access to electrical wiring with-out the
need to open the fixture
• Knock-outs for easy electrical wiring and assembly
• Factory Installed Occupancy Sensor option
• Factory Installed Emergency ballast option
• Lamp Installation option available
• Multiple power cord set options, (voltage, length, gage)
• Pendant mount kit provides a top J-box to simplify HID
retrofit installations. Can be used with a hook or rigid conduit
and fasteners (Fixture must be specified with “J” option)
• Door and lens kit options available
• Choice of 86% Standard Specular Aluminum Reflector, 95%
Specular Enhanced Aluminum Reflector, 95% Enhanced
Specular Aluminum Enhanced Performance or 91% White
Reflector
• Heavy Duty pre-painted steel construction
• Factory Installed Wireguard option
• Custom configurations available
• Can be easily mounted by a single person
• Suspended or Pendant mounting insures a quick painless
install
• Chain and V-Clip Hanging option
• Wire cable hanging option.
• UL Listed for Damp Locations
Specifications subject to change without notice.
Gymnasium
Cafeteria
Auditorium
Project:
Catalog#:
Approved by:
Description
HFA1 series high-bay fluorescent fixture is a great
energy saving alternative to traditional HID highbay fixtures. This fixture operates six lamps and as
a standard feature comes equipped with Howard
ballasts.
Benefits
• Energy Saving Compared to HID systems
• Exceptional Color Rendering
• High System Efficacy
• Long Lamp Life
• Instant On/Re-strike Capability
• Howard Ballast and Howard Lamp as a
system is covered by Howard Industries
Warranty
• Quality Lamp holders
• Computer Designed Reflectors
• System Designed, Approved, Manufactured,
and Tested by Howard Industries in
Mendenhall Mississippi.
• Compliant with Safety and performance
standards.
Holes for “V” clip
Cable hanging
Factory Installed Option J
Pendant Mount Kit (PMK2)
installs from the outside: no
need to open the fixture
Access plate
3.875”
19.875”
Reflector Assembly
pivoted open after
removal of 2 screws*.
*Optional: 1/4 turn fasteners offer toolless access to the ballast compartment without
removing lamps. Simply rotate the two 1/4 turn fasteners. See Factory Installed Option Q
for more information.
& chain hanging
48”
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(1) Lamp installation available.
(2) High Efficiency ballasts are CEE Listed.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not the
access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
(9) 1/4 Turn Fasteners for tool-less access to ballast compartment. Does not require lamp removal.
(10) Gymnasium wire guard with door and lens is a rough service option that provides 3 inches of space between wire guard and lens
offering additional protection in a gymnasium application. This option is best ordered with factory installed lamps.
SE Standard Ballast Factor High Efficiency Instant Start T8 Ballast
HE High Ballast Factor High Efficiency Instant Start T8 Ballast
LE Low Ballast Factor High Efficiency Instant Start T8 Ballast
PS Program Rapid Start T5 Ballast
P8 Program Rapid Start High Efficiency T8 Ballast
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
Sample Ordering Number:
HFA1 E 6 32 A SE MV 000 00 I
HFA1 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
6-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
RAPID SHIP MODELS
AVAILABLE FOR NEXT DAY SHIPMENT
•HFA1A632AHEMV000000I
•HFA1A654APSMV000000I
•HFA1E632AHEMV000000I
•HFA1E654APSMV000000I
Specification Sheet
2/22/2015
HFA1 Series
Project:
Field Installed Options Ordering
Highbay Fluorescent
HFA1-WG
Wire Guard
HF-2CV (2 foot)
HF-3CV (3 foot)
Hanging Chain & V-clips
HFA-WCH
Wire Cable Hanging Kit
(2 pcs per kit)
HF-SK1
Stabilizer Kit
(Hub, color and wire cable)
Catalog#:
Approved by:
HF-PMK2
Pendant Mount Kit
with 1.0” diameter through hole
Energy Cost Estimator
Existing SystemNew System
HFA1E632ASE
400W MH Highbay
Hours
burned
per year
Cost per
kWh$
4368
0.12
Energy Cost
Estimation
Howard Industries provides this tool to examine the potential impact of lighting decisions. This tool provides an ESTIMATE only. The analysis of this tool does not
warrant or guarantee the actual costs or savings that will be realized as the analysis suggested. You can find the full version of this cost saving tool at the Howard
Lighting Website—www.howardlightingproducts.com. Click “Cost of Ownership Calculator”.
Copyright (c) 2008 Howard Industries All Rights Reserved.
Specifications subject to change without notice.
Number
of Fixtures
Watts per
Fixture
(existing
system)
Energy
used
per year
(existing
system)
Energy saving per
year (per fixture)
1
458
$240
High Eff Standard BF
Fluorescent Highbay
$250
Number of
Fixtures
Watts per
Fixture
(new
system)
Energy
used per
year (new
system)
1
222
$116
$200
$150
$100
$50
$0
$124.00
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443