Howard Industries FSR4 Series Specifications
Specification Sheet
2/22/2015
4’ Fluorescent Strip Channel
Retrofit Kit
FSR4 Series
Project:
Catalog#:
Approved by:
Fluorescent Retrofit
Lamp Type
Watts
Raw lamp lumens
Ballast factor
Effective Lamp
Lumens (BF * raw
lumens)
Lumens per Watt
Lumens relative to
base case (%)
Energy Savings
Reflector and
lamps sold
separately!
Applications
Multiple configurations allow you to select a lamp type and
number to meet your criteria, whether they be:
Improved Light
Energy Savings
Utility Rebates
Improved reliability
Up to 38%
Energy Reduction
with same light!
Existing
Fixture
2x 40W T12
Base Case
87 48 54 72
5760 6200 6200 6200
92% 77% 87% 114%
5300 4774 5394 7068
59 99 100 98
100% 90% 102% 148%
NA 45% 38% 17%
2x 32W T8
Low Ballast
Factor
2x 32W T8
Standard
Ballast
Factor
2x 32W T8
High Ballast
Factor
Description
FSR4 series fluorescent strip channel retrofit kit is
a simple and cost-effective solution to upgrading
existing 4’ strip fixtures into newer and more efficient
electronic T8 or T5 strips.
Features
Construction
• Designed for trouble free installation.
• Lampholder cutouts guarantee correct
lampholder spacing and that lampholder will not
fall out during install.
• Optional reflectors available
• Simple one piece construction
• Code gauge steel
• High gloss, baked enamel finish
• High quality lamp holders
• NEC compliant luminaire power disconnect
standard
• Contents: 1 geartray with fully wired ballast and
• lampholders; 6 tek screws; 2 geartray tethers
Ballast
• Electronic, Inherent Thermal Protection, Class P,
Sound rated A
• UL Listed
Fixture Listing: UL Listed
Quality Assurance
• System Tested, Designed, Approved, and
Manufactured in Mendenhall, Mississippi.
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
FSR4 Series
4’ Fluorescent Strip Channel
Retrofit Kit
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
Fixture
Length
Width
No. of
Lamps
Lamp Type/
Wattage
(1)
Ballast Input Volts Factory Installed Options Cordset Options
Fluorescent Retrofit
FSR 4 4 2 32A SE MV 000 00 0 I
(2)
Reflector
Retainer
Screw
(2)
(2)
(2)
Lampholders
MV: 120-277v
HV: 347-480v (T5HO)
AX: 480-277
(3)
(1) Lamps not included. Please use “PS” Ballast Ordering Options for T5 lamp type.
(2) High Efficiency ballasts are CEE Listed.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
Sample Ordering Number:
FSR 4 4 2 32A SE MV 000 00 0 I
FSR4 Fluorescent Strip Retrofit Kit
4-foot 4.25” Wide Cover
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
RAPID SHIP MODEL
AVAILABLE FOR NEXT DAY SHIPMENT
000: No FIOs 00: Standard Disconnect I: Single
•FSR44232ASEMV000000I
FSR 4: Four Foot 4: 4.25”
5: 5”
O: Other
(Specify Width)
1
2
Installation in Seven Simple Steps
1. Power off
2. Remove existing front cover, lampholders,
and socket bars.
3. Screw geartray tethers into existing fixture to
hang geartray.
4. Insert lampholders into labeled geartray
cutouts.
5. Insert incoming power leads into ballast
disconnect plug.
6. Close cover and screw it to fixture body.
7. Insert lamps.
32A: F32T8
28A:F28T5
54A: F54T5HO
Lampholders
Reflector
SE: SBF High Eff
HE: HBF High Eff
LE: LBF High Eff
SI: SBF
PS: PRS T5
P8: PRS T8
Existing
fixture
Geartray tethers
Geartray
T
Pack.
B
A
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Loading...