Howard Industries FSA8 Series Specifications

Specification Sheet
9/4/2013
8’ Fluorescent Strip
Two or Four Lamps
Fluorescent Strip
Applications
Area Lighting Display Cases Shop/Sheds
Dimensions
Task Lighting Storage Areas Utility Areas
4.5”
FSA8 Series
Project:
Catalog#:
Approved by:
Description
FSA8 series fluorescent strip fixture exemplifies durability, versatility, functionality, and practicality. This fixture operates two or four lamps and as a standard feature comes with a Howard ballast.
Features
• Construction
-Die-formed code-gauge steel
-High gloss, baked enamel finish
-High quality lamp holders
-NEC compliant luminaire power disconnect standard
• Installation
-Shipped fully wired with Howard ballast
-Tool free, snap together assembly
-Easy access to wiring compartment and ballast via removable raceway panel
-Numerous knockouts on side, back, and ends
-Flexible mounting options: surface mount, pendant mount, and chain hanging
• Ballast
-Electronic, Inherent Thermal Protection, Class P, Sound rated A
-UL Listed
• Fixture Listing
-UL Listed
• Quality Assurance
-System Tested, Designed, Approved, and Manufactured in Mendenhall, Mississippi.
2.62”
Dimples (4 places)
Overall length 96”
7/8” Knock Outs (9 places)
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
FSA detail with Hanging Chain and V-clip mounting option. See Field Installed Options table for details.
Specification Sheet
9/4/2013
FSA8 Series
8’ Fluorescent Strip
Two or Four Lamps
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
Reflector/Lens
No. of Lamps
Lamp Type/Wattage
(1)
Ballast Input Volts Factory Installed
Cordset Options
Options
Fluorescent Strip
FSA8 0 2 96H SI MV 00B 00 0 I
FSA8 0: Reflective White
Front (86%)
2
(1)
4
32A: F32T8
59A: F98T8
96S: F96T12 Slimline*
96H: F96T12HO*
(1)(3)
SI: Stand. BF Electronic T8
SI: Electronic Instant Start T12
RS: Electronic Rapid Start T12
MV: 120-277v 000: No FIOs
B: Emergency Ballast I: Special Wiring Instructions
00: Standard Disconnect
(4)
01: 6’, no plug 02: 10’, no plug 03: 6’, twist lock 120v 04: 10’ twist lock 120v 05: 6’ non twist lock 120v 06: 10’ non twist lock 120v 07: 6’ twist lock 277v 08: 10’ twist lock 277v 09: 6’ non twist lock 277v 10: 10’ non twist lock 277v 11: 16/3, no plug spec len 12: 16/4, no plug spec len 16: 16’, non twist lock 277v 17: 18/3, no plug spec len 18: 6’, twist lock 480v 19: 10’, twist lock 480v 20: 16’, twist lock 120v 21: 16’, twist lock 277v
T B A
Pack.
I: Single B: Bulk
(1) Tandem 4’ T8 only (2) Lamp installation not available. (3) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same. (4) Please specify Emergency Ballast lumen requirements at time of request.
*Circle E logo indicates that this product complies with federal energy efficiency requirements.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
Sample Ordering Number: FSA8 0 2 96H SI MV 00B 00 0 I
FSA8 Series 8-Foot Fluorescent Strip Reflective White Front 2-lamps (none installed) F96T12HO Electronic Rapid Start Ballast Multi-volt (120-277v) Factory Installed Emergency Ballast No Cordset Single Packaging
www.HowardLightingProducts.com
Specification Sheet
9/4/2013
FSA8 Series
Project:
Field Installed Options Ordering
Fluorescent Strip
Model Description
HF 2CV 2-ft hanging chain & v-clips HF 3CV 3-ft hanging chain & v-clips
Catalog#:
Approved by:
Energy Cost Estimator
Existing System New System
M2/110RS-277 FSA80432ASI
Hours
burned
per year
Cost per
kWh$
4368
0.12
Energy Cost
Estimation
Howard Industries provides this tool to examine the potential impact of lighting decisions. This tool provides an ESTIMATE only. The analysis of this tool does not warrant or guarantee the actual costs or savings that will be realized as the analysis suggested. You can find the full version of this cost saving tool at the Howard Lighting Website—www.howardlightingproducts.com. Click “Cost of Ownership Calculator”.
Copyright (c) 2008 Howard Industries All Rights Reserved.
Number
of Fixtures
Watts per
Fixture
(existing
system)
Energy
used per year (existing
system)
Energy saving per
year (per fixture)
1
209
$128
Number of
Fixtures
Watts per
Fixture
(new
system)
Energy
used per
year (new
system)
1
114
$60
$68
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
$130
$104
$78
$52
$26
$0
53% Annual Savings
$128 $60
Existing System New System
Specification Sheet
9/4/2013
FSA8 Series
Project:
Photometric Data - 4 Lamp T8 (FSA80296HSI)
Iso-Footcandle Plot
Fluorescent Strip
8’ Mounting Height, Ballast: 2-lamp E2/110RS Multi-volt ballast Lamps: Two 110W T12HO
Catalog#:
Approved by:
Zonal Lumen Summary
Zone Lumens %Lamp %Fix
0-30 1910 15.0 16.0
0-40 3246 25.0 27.0
0-60 6330 49.0 53.0
0-90 9625 75.0 81.0
90-120 1635 13.0 14.0
90-150 2187 17.0 18.0
90-180 2213 17.0 19.0
0-180 11838 92.0 100.0
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 0.20
RC 80 70 50 30 10
RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 0
0 105 105 105 105 101 101 101 101 93 93 93 85 85 85 78
1 94 88 84 79 98 84 80 76 77 74 71 71 68 65 60
2 84 75 68 62 80 72 66 60 66 61 56 60 56 52 47
3 76 65 57 50 72 62 55 49 57 51 46 52 47 43 38
4 69 57 48 42 65 55 47 41 50 43 38 46 40 36 32
5 63 51 42 35 60 48 40 34 45 38 32 41 35 30 27
6 58 45 36 30 55 43 35 29 40 33 28 37 31 26 23
7 54 41 32 26 51 39 31 26 36 29 24 33 27 23 20
8 50 37 29 23 47 35 28 23 33 26 21 30 25 20 18
9 46 34 26 21 44 32 25 20 30 24 19 28 22 18 16
10 43 31 23 18 41 30 23 18 28 21 17 26 20 16 14
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Loading...