Page 1
Specification Sheet
7/16/2013
4’ Fluorescent Strip
One or Two Lamps
Fluorescent Strip
Applications
Area Lighting
Display Cases
Shop/Sheds
Dimensions
Task Lighting
Storage Areas
Utility Areas
4.5”
FSA4 Series
Project:
Catalog#:
Approved by:
Description
FSA4 series fluorescent strip fixture exemplifies
durability, versatility, functionality, and practicality.
This fixture operates two lamps and as a standard
feature comes with a Howard ballast.
Features
• Construction
-Die-formed code-gauge steel
-High gloss, baked enamel finish
-High quality lamp holders
-NEC compliant luminaire power disconnect
standard
• Installation
-Shipped fully wired with Howard ballast
-Tool free, snap together assembly
-Easy access to wiring compartment and ballast
via removable raceway panel
-Numerous knockouts on side, back, and ends
-Flexible mounting options: surface mount,
pendant mount, and chain hanging
• Ballast
-Electronic, Inherent Thermal Protection, Class P,
Sound rated A
-UL Listed
• Fixture Listing
-UL Listed
• Quality Assurance
-System Tested, Designed, Approved, and
Manufactured in Mendenhall, Mississippi.
Dimples
(4 places)
Specifications subject to change without notice.
7/8” Knock Outs
(8 places)
2.62”
48”
48”
3.25”
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
FSA detail with Hanging
Chain and V-clip mounting
option. See Field Installed
Options table for details.
Page 2
Specification Sheet
7/16/2013
FSA4 Series
4’ Fluorescent Strip
One or Two Lamps
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
Fluorescent Strip
Reflector/Lens
No. of
Lamps
Lamp Type/
Wattage
(1)
Ballast Input Volts Factory Installed
Options
Cordset Options
FSA4 0 2 32 SE MV 000 00 0 I
FSA4 0: Reflective White Front
(86%)
1
2
32A: F32T8
(2)
SE: SBF High Eff
HE: HBF High Eff
LE: LBF High Eff
(3)
MV: 120-277v 000: No FIOs 00: Standard Disconnect
(3)
(3)
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
T
B
A
Pack.
I: Single
B: Bulk
(1) Lamp installation not available.
(2) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same.
(3) High Efficiency ballasts are CEE Listed.
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Sample Ordering Number:
FSA4 0 2 32A SE MV 000 00 0 I
FSA4 Series 4-Foot Fluorescent Strip
Reflective White Front
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
Page 3
Specification Sheet
7/16/2013
FSA4 Series
Project:
Field Installed Options Ordering
Fluorescent Strip
Model Description
HF 2CV 2-ft hanging chain & v-clips
HF 3CV 3-ft hanging chain & v-clips
Catalog#:
Approved by:
Energy Cost Estimator
Existing System New System
M2/40RS-277 FSA40232ASE
Hours
burned
per year
Cost per
kWh$
4368
0.12
Energy Cost
Estimation
Howard Industries provides this tool to examine the potential impact of lighting decisions. This tool provides an ESTIMATE only. The analysis of this tool does not
warrant or guarantee the actual costs or savings that will be realized as the analysis suggested. You can find the full version of this cost saving tool at the Howard
Lighting Website—www.howardlightingproducts.com. Click “Cost of Ownership Calculator”.
Copyright (c) 2008 Howard Industries All Rights Reserved.
Specifications subject to change without notice.
Number
of Fixtures
Watts per
Fixture
(existing
system)
Energy
used
per year
(existing
system)
Energy saving per
year (per fixture)
1
87
$40
Number of
Fixtures
Watts per
Fixture
(new
system)
Energy
used per
year (new
system)
1
54
$28
$12
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
$50
$40
$30
$20
$10
$0
30% Annual Savings
$40 $28
Existing System New System
Page 4
Specification Sheet
7/16/2013
FSA4 Series
Project:
Photometric Data - 2 Lamp T8 (FSA0232)
Iso-Footcandle Plot
Fluorescent Strip
8’ Mounting Height,
Ballast: 2-lamp Multi-volt ballast
Lamps: Two 32W T8
Catalog#:
Approved by:
Zonal Lumen Summary
Zone Lumens %Lamp %Fix
0-30 1046 18.0 16.0
0-40 1780 30.0 27.0
0-60 3493 59.0 53.0
0-90 5496 93.0 84.0
90-120 1033 18.0 16.0
90-150 1064 18.0 16.0
90-180 1064 18.0 16.0
0-180 6560 111.0 100.0
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 0.20
RC 80 70 50 30 10
RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 0
0 128 128 128 128 123 123 123 123 114 114 114 105 105 105 97
1 113 106 100 95 108 102 97 92 94 90 85 87 83 80 73
2 101 90 81 74 96 87 79 72 80 73 67 73 68 63 57
3 91 78 68 60 87 75 65 58 69 61 55 63 57 51 46
4 83 68 57 49 79 65 56 48 60 52 45 56 49 43 38
5 76 60 49 42 72 58 48 40 54 45 38 49 42 36 32
6 70 54 43 36 66 52 42 35 48 39 33 44 37 31 28
7 64 48 38 31 61 47 37 30 43 35 29 40 33 27 24
8 60 44 34 27 57 42 33 27 39 31 25 37 29 24 21
9 56 40 31 24 53 39 30 24 36 28 23 34 27 22 19
10 52 37 28 22 50 36 27 21 33 26 20 31 24 19 17
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Loading...