Howard Industries F32T8/841/HL/ECO/IC Specifications

Specification Sheet

9/5/2013

F32T8/841/HL/ECO

Project:

Linear Fluorescent Lamps

T8 Linear Fluorescent Lamp

32 Watt / 85 CRI / 4100K

HIGH LUMEN

Ordering Information

Howard Catalog Number (Ordering Code) F32T8/841/HL/ECO
UPC Code 01949
Description T8 Low Mercury Linear Fluorescent
Package Quantity 25

Physical Characteristics

Base Medium Bipin
Bulb Type T8 (8/8 inch)

ACB

Bulb Description Tubular Fluorescent Lamp
Nominal Length (in) 48
Base face to base face (Amax) (in) 47.22
Base face to end of opposite base pin
(Bmin/Bmax) (in)
End of base pin to end of the opposite pin
end (Cmin/Cmax) (in)

Operating Characteristics

Nominal Wattage 32
Approximate Initial Lumen (lm) 3100
Approximate Mean Lumen (lm) 2950
Average Rated Life (hours) 24000
Color Temperature (K) 4100
Color Rendering Index (CRI) 85

Catalog#:

Approved by:

47.40/47.78

47.67/47.78

1.0

0.8

0.6

0.4

0.2

0.0

Relative Power

400 450 500

Wavelength / nm

550 600 650 700

750

E

This lamp meets

Federal Minimum

Efficiency standards.

Note: Rated lamp life is 24,000 hours based on 3 hours per start and 30,000 hours based on 12 hours per start. Lamp
life will be affected when using occupancy sensors, dimmers, or dimming systems. These products are Low-Mercury

uorescent lamps and pass the Federal TCLP for hazardous waste. Disposal regulations may very; check local and state
regulations. Specications subject to change.

Specifications subject to change without notice.

Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443

(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652

www.HowardLightingProducts.com