CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
Care and Cleaning
Estimated Assembly Time:30 minutes
Part List and Hardware List
Assembly Instruction
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water,
never a solvent) to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to
dust or wipe carefully.
3X
1X
2X
1X
2X
F
1X
3X
1X
36X
24X
Wire Nut
Mounting Plate
Lampbody
Canopy Nut
Mounting Screw
Frame
Finial
Dropper
Decoration
Bulb
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
E
D
G
H
I
J
1/3
Installation
Step 1
Unpack all parts from cartons carefully.
Separate the Mounting Plate(A) from the Canopy by removing
the Canopy Nut(E) anti-clockwise.
Place the Frame(F) to the Lampbody(D) and
tighten by finial(G)
Step 2 Wire connection
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
Step 3
Installing the Mounting Plate(A) to the junction box
with Mounting Screw(C ).
Attach the Canopy to the junction box and fix it
by turning the Canopy Nut (E) clockwise.
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
Black
White
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green
grounding screw on mounting bracket. Tighten ground screw.
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
F
G
A
E
D
D
B
C
A
GND
E
2/3
Step 4
Insert the bulb (J) into the Socket
Hang the Decoration(H) to the Lampbody(D) as shown.
Hang the Dropper(I) to the Frame(F) as shown.
PLEASUE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 9-WATT
THERE ARE 3PCS TYPE"B" BULB IN THE BOX.
Step 5
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
F
G
A
E
D
D
B
C
A
GND
E
F
I
I
H
H
J
D
3/3
Loading...