CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
Care and Cleaning
Estimated Assembly Time:30 minutes
Part List and Hardware List
Assembly Instruction
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water,
never a solvent) to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to
dust or wipe carefully.
3X
1X
2X
1X
2X
F
3X
1X
Wire Nut
Mounting Plate
Canopy
Canopy Nut
Mounting Screw
Bulb
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
E
D
G
H
I
1X
1X
1X
Shade
Diffuser
Metal Cover
J
Finial
1/3
Installation
Step 1
Unpack all parts from cartons carefully.
Separate the Mounting Plate(A) from the Canopy(D) by removing
the Canopy Nut(E) anti-clockwise.
Step 2
Insert the J-box wires through the center opening of Mounting Plate (A)
Attach the Mounting Plate (A) onto the J-box and secure it by
turning the 2 Mounting Screws (C) clockwise until tight.
Step 3 Wire connection
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green
grounding screw on mounting bracket. Tighten ground screw.
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector.
Black
White
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
A
C
A
D
E
2/3
Step 4
Attach the Canopy(D) to the Mounting Plate (A) and fix it
by turning the Canopy Nut (E) clockwise.
Step 5
Insert the Bulbs (F) into the Socket as diagram.
Place the Diffuser(H) frist then the Metal Cover(I)
onto the threaded portion of of the tube underneath
the socket as diagram.
Fix the Diffuser(H) in place by turning
the Finial (J) clockwise till tight.
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 9-WATT
THERE ARE 3 X 25W BULBS IN THE BOX.
Step 6
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
A
B
C
D
E
G
H
I
3/3
Loading...