HOUNO Visual Cooking I B User Manual
Dear customer,
Congratulations on the purchase of your new HOUNÖ oven.
You are now the owner of one of the leading ovens on the market.
All HOUNÖ products are subjected to intensive product development, which ensures that the products
always offer the latest technology and the most up-to-date and energy-saving methods of preparation.
Moreover, the HOUNÖ products are entirely up-to-date with the latest developments/technology in terms of
• ERGONOMICS AND SAFETY
• SIMPLE AND LOGICAL OPERATION
• ELEGANT AND FUNCTIONAL DESIGN
• RELIABILITY AND SERVICE
To ensure that our customers get an optimum and reliable product, all HOUNÖ units are passed through an
extensive test programme in which all functions are subjected to a continuous and extreme load.
Before you start using the oven and its many automatic functions, we recommend that you study the manual
thoroughly so as to ensure optimum cooking results. By going through the manual, you will obtain a better
understanding of the advanced technology and feel safer while using the oven in your daily work.
Furthermore, we call your attention to the wide variety of optional extras:
• 10 preset programs each with 3 process steps
• Handshower
• Timer start function
• Additional cassette rack, trolley for rack, booster pump,
extraction hood with steam condenser
• Automatic cleaning system, CombiClean (cannot be retrofitted)
Terms of warranty
The oven cabinet and the technical parts of your new HOUNÖ oven are covered by a 12-month factory
warranty. However, the heating elements in the oven compartment and the steam generator are guaranteed
for 24 months. The period of warranty takes effect from the date of installation.
The warranty does not include....
We especially draw your attention to the fact that the factory warranty does not cover glass parts such as
oven door glass, lamp glass and incandescent lamps, nor does it cover sealing such as door gaskets, gaskets
for heating elements, etc. Furthermore, the factory warranty does not apply in the case of
1. defects that are due to the fact that installation has not been carried out in accordance with the HOUNÖ
Installation & Service Manual at present in force (electricity, water/drain, exhaust).
2. defects and interruptions of operation that are the result of the oven not being handled/operated as
specified in the user's manual.
If you utilise all the technological facilities of this oven, you are guaranteed perfect results with only a
minimum of resources.
For further information on the HOUNÖ range of products, please visit www.houno.com.
Yours sincerely,
HOUNÖ A/S
B – ver. 1.3 – Sept. 2005
1
Table of contents
Settings 3 - 5
Description of modes 4 - 7
Programs 8
How to achieve perfect baking and roasting results 9
Baking of bread dough and deep-frozen bread 10
User menu 11-12
Cleaning 13-15
For further information on the functions and user interface of the oven, see Service &
Installation Manual.
B – ver. 1.3 – Sept. 2005
2
)
TEMPERATURE SETTING. Press
once and set temperature wit h
TURN SWITCH. Enter by pressing
symbol again.
TIME SETTING. Pr ess once a nd
set time with TURN SWITCH. 4
hours is maximu m. Confirm by
pressing key.
SETTING HUMIDITY PULSING
(1-99). Press and set number of
seconds with TURN SWITCH.
Confirm by pressing key.
PROGRAMS (optional extra).
Press once and choose program
with TURN SWITCH. Editing and
deleting are described on following pages. (1)
STEP shows current step when
PROGRAM mode is active.
Control lamp next to ALARM
lights up when alarm sound has
been chosen after a step (when
PRG is active
.
PRG
Settings
Main switch
HOT AIR 30-250°C. All modes
and all optional extras are
described on following pages.
COMBI STEAMING 1-2-3.
1 control lamp = combi 1
2 control lamps = combi 2
3 control lamps = combi 3
PREHEATING max. 300°C
for max. 15 minutes
EXHAUST is open when control
lamp is on.
FAN is active when control lamp
is on.
ON/OFF
You open the door by turning the handle twice to the right.
(1) If the oven does not incorporate the fully automatic cleaning program, COMBICLEAN, the
manually operated cleaning system can be activated by pressing the PRG key and turning the
SWITCH until ”CLEANING” appears in the display.
B – ver. 1.3 – Sept. 2005
3
Setting of temperature
Press TEMPERATURE key once and set temperature with turn switch.
Setting of time
Press TIME key.
Time flashes.
Choose desired time (hours and minutes) with turn switch.
If switch is turned all the way down to 0, ”-:--” (continuous operation) appears in the display.
Max. time setting is 4 hours.
Setting of core temperature (optional extra)
Press CORE TEMPERATURE key.
If the display is off, the core temperature appears as 75°C.
Set core temperature between 30 and 99°C with turn switch.
Core temperature is deactivated by turning switch past 30.
When core temperature is chosen, time changes to ”-:--” .
The core temperature probe has several measuring points from the tip of the sensor and upwards.
The computer calculates an average temperature thus ensuring that the core temperature is 100%
correct.
If the probe is inserted incorrectly, the advanced technology notifies you at once.
The probe is inserted vertically in the thickest part of the product.
When preparing products of very different sizes, you get a uniform quality by inserting the sensor in
the smallest product and then moving it to a larger product when the core temperature alarm sounds.
Programs (optional extra)
10 programs that can hold 3 process steps each. It is possible to write 10 characters and entering
alarm after steps 1 and 2.
Press PRG and turn the switch. The first five programs are preset by the factory.
Start the program by pressing the ON/OFF key.
To leave PROGRAM, turn the switch beyond ”P O”.
To delete
an entire program, press core temperature key and alarm key simultaneously for 2
seconds.
When the keys or the turn switch is idle for 20 seconds, the oven returns to manual operation.
Entering and changing text
To enter or change text, press PRG for 3 seconds.
The first digit or the relevant letter/”_” flashes alternately. Change the flashing character with the
turn switch. You can choose between all the letters of the alphabet and the digits 0 – 9.
The space sign is next to the letter A.
Move on to the next digit by pressing PRG briefly.
Store text
by pressing PRG until “STORED” appears in the display.
To leave text editing without storing, press ALARM. The original text reappears.
To delete the entire text, press PRG and ALARM simultaneously for 2 seconds.
When a key or the turn switch is idle for 20 seconds, the oven returns to select program.
B – ver. 1.3 – Sept. 2005
4
Entering and changing data in steps
By pressing STEP when PROGRAM is active, the step display is turned on and shows ”1”. The
data of the first step can now be entered.
To move on to the next step (1-3) and read and change settings, press STEP again.
Choose and change temperature, time, core temperature, exhaust and fan as in manual operation.
Stop between steps: To turn the alarm between steps on and off, press ALARM. If the control lamp
is on, the program ends with the current step and a beep is heard. The oven does not proceed to the
next step until the oven door is opened and closed or you press ALARM.
To store a change made in the step mode, press PRG for 2 seconds.
Leave STEP by choosing another program with the turn switch.
Delete current step by pressing STEP and ALARM simultaneously for 2 seconds.
When the program has started, you can still change time, temperature, core temperature and the
settings of fan and exhaust. These changes will then only be active in the current run. Note that the
display shows the total time remaining after start and that it will show the time remaining in the
current step when you press TIME.
B – ver. 1.3 – Sept. 2005
5
Loading...