HotWire ND20-15D, ND15-15D, ND10-15D User Manual

Electric Panel Heater

1000w/1500w/2000w

24/7 LCD Programming

MODEL:ND20-15D ND15-15D ND10-15D

User Manual

Please read and save the user manual

BEFORE USE

Read and follow all the instructions in this manual even if you feel you are familiar with the
product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification
plate) and the date you received the product, together with your purchase receipt and attach to
the warranty and service information. Retain in the event that warranty service is required.

NOTE: The rating of this product (as marked on the product identification plate) is based on
specific loading tests. Normal use, or the use of other recommended attachments, may draw
significantly less power.

IMPORTANT SAFEGUARDS

When using any electrically powered product, basic safety precautions should always be followed,
including the following:
WARNING-to reduce the risk of fire, electrical shock or injury to persons or property:

● Read all instructions before using this appliance and keep them for future reference.

● Use only the voltage specified on the rating plate of the heater.

● Do not cover or restrict airflow to the inlet or exhaust grills in any manner as the appliance may

overheat and become a fire risk.

● Do not cover grills, block entry or exhaust of airflow by placing appliance against any surface.
Keep all objects at least 1 metre from the front, side and rear of the appliance.

● Do not place the appliance close to a radiant heat source.

● Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.

● This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surface.

Switch off and let it cool before moving.

● Do not use the appliance to dry clothes.

● Do not insert or allow foreign object or metal utensils to enter any ventilation or exhaust opening,

as this may cause an electric shock, fire or damage to the appliance.

● Do not immerse in liquid or allow running into the interior of the appliance, as this could create
an electrical shock hazard.

● Do not reach for an appliance that has fallen into water. Switch off at supply and
unplug immediately.

● Do not operate any appliance with a damaged cord, plug or after the appliance malfunctions or
has been dropped or damaged in any manner. Return to a qualified electrical person for
examination, electrical or mechanical adjustment, service or repair.

● Do not operate appliance with wet hands.

● The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure

these deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents
and grills.

● Do not use this appliance in a window as rain may cause electric shock.

● Do not use an abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)

rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.

● Do not connect the appliance to the mains voltage until completely assembled and adjusted.

● This appliance is not intended for use in outdoor locations.

● Do not use this appliance in the immediate surrounds of a bath, a shower or a swimming pool

or other liquids.

● Always operate upright.

● Switch off and leave to cool before moving.

● Do not operate with cord set coiled up as a buildup of heat is likely, which could be sufficient to

become a hazard.

● The use of an extension cord with this appliance is not recommended.

● Do not remove plug from power socket until the appliance has been switched off.

● Do not remove plug from power socket by pulling the supply cord-always grip plug.

● Always unplug appliance when not in use.

● CAUTION: This product is NOT suitable to be used on long pile carpets or Flokati rugs.

● Do not allow cord to come in contact with heated surface during operation.

● Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from traffic

areas so that it will not be tripped over.

● Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has been removed from any cord storage area.

● Do not use outdoors or whilst standing on a damp floor.

● Do not store appliance while it is still hot.

● This appliance is not intended for use by young children or infirm persons without supervision.

● Young children should be supervised to ensure they do not play with the appliance.

● The appliance must not be located immediately below a socket-outlet.

● Do not use this appliance with another programmer, timer or any other device that switches the

heater on automatically, since a fire risk exists if the appliance is covered or positioned
incorrectly.

● All covers of this appliance is intended to prevent direct access to the heating elements and
must be in place when the appliance is in use.

● "WARNING: In order to avoid overloading, do not cover the heater."

● To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to

rain, moisture or any liquid other than those necessary for correct operation of the product.

● the fireguard does not give full protection for young children and for infirm persons.

● If the supply cord is damaged, it must be replaced by a qualified electrical person in order to

avoid a hazard.

● Do not use this appliance outdoors, or on wet surfaces. Avoid spilling liquid on the appliance.

"CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly on and off by the utility."

● Use this appliance only as described in this manual. Any other use is not recommended by
the manufacturer and may cause fire, electric shock or injury.

● This appliance is intended for household use only and not for commercial or industrial use.

Overview of the appliance

Fig. 1

Specifications:

Rated Power: 2000W/1000W 1500W/750W 1000W/500W
Rated Voltage: 240V 50Hz 240V 50Hz 240V 50Hz
Dimensions (mm): 830*75*400 595*75*400 460*75*400

1. The function module

This function module is designed for use with the Hotwire Panel Convector Heater.
It is supplied fully assembled and can be replaced by an authorized technician. The
heater must be shut down during installation. The function module contains an
accurate electronic thermostat.

2. Guide to the control panel

2.1. Control panel

“1”： Power On/Off button
“2”： Mechanical/automatic mode choose
“3”： Mechanical/automatic mode timer setting.
“4”： Confirm button
“5”： Downwards adjustment
“6”： Upwards adjustment
“7”： High/low power selected
“8”： Power indicator light
“9”： Day
“10”Heating element working indicator light
“11”Low power
“12”High power
“13”Negative ion function--This model excludes negative ion function
“14”Mechanical control
“15” Automatic control
“16” Timer
“17” Hours display
“18” Minutes display

Control Panel

Air Outlet

Air Inlet
Castor Set