Hot Wheels SPEEDRACER M4552-0920, SPEED RACER Instructions Manual
M4552-0920 Size: 8.5” x 33” Color: 2C + 2C
5
Keep these instructions for future reference as they contain important information.
CONTENTS
Battery Installation / Replacement
Remove battery cover with a Phillips head
screwdriver (not included). Remove batteries
included for demonstration purposes and
dispose of them safely. Insert 3 new "AA" (LR6)
alkaline batteries in the orientation shown.
Replace battery cover and tighten screw. For best
performance use only alkaline batteries. Replace
batteries if booster no longer propels cars
through the set.
A1
A2
J2
J1
B1
K2
B2
K1
C1
C2
L1
L2
D1
D2
M1
M2
E1
E2
Q1
N1
N2
F1
F2
Q2
x 2
F1
F2
x 2
F1
F2
x 2
F1
F2
F1
F2
F1
F2
4
M4552-0920
Requires 3 “AA” (LR6) alkaline batteries. Batteries included are for demonstration purposes.
Refer to numbers on parts and contents page to help with assembly.
POWERBURST FIGURE 8POWERBURST FIGURE 8POWERBURST FIGURE 8
CK SET
A
TRACK SET TR
TRACK SET
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
C1
4
2.
5
GO
To Play
CHARGE THE CAR
C1
C1
C1
C2
E1
E2
D1
D2
1
F1
F2
F1
F2
F1
F2
J1
J2
M1
M2
ASSEMBLY
Battery Installation / Replacement
Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check your
local authority for recycling advice and facilities.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To
avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
product before being charged (if designed to be
removable).
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries
inside may explode or leak.
Remove battery cover with a Phillips head
screwdriver (not included). Remove batteries
included for demonstration purposes and
dispose of them safely. Insert 3 new "AA" (LR6)
alkaline batteries in the orientation shown.
Replace battery cover and tighten screw. For best
performance use only alkaline batteries. Replace
batteries if booster no longer propels cars
through the set.
BOTTOM VIEW
3
6
Squeeze in ends of track at each connection.
Spread out opposite ends as shown.
TRACK TIPS FOR BEST RACE ACTION
J1
M2
A1
A2
Q1
Q1
Q2
Q2
N1
N2
B1
B2
2
Q1
Q2
F1
F2
F1
F2
F1
F2
K1
K2
L1
L2
K1
L2
3.
Press the skid levers on
either side of the track
Loading...