Hotpoint Ariston WMD 923 Instructions For Use Manual

GB

1

English,1

Contents

Installation, 2-3

Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data

Description of the washing machine, 4-5

Control panel
Display

Running a wash cycle, 6

Wash cycles and functions, 7

Table of wash cycles
Wash functions

Detergents and laundry, 8

Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system

Precautions and tips, 9

General safety
Disposal
Opening the porthole door manually

Care and maintenance, 10

Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose

Troubleshooting, 11

Service, 12

GB

WMD 923

Instructions for use

WASHING MACHINE

Itaiiano,13

IT

2

GB

Levelling the machine correctly will provide it with stability,
help to avoid vibrations and excessive noise and prevent it
from shifting while it is operating. If it is placed on carpet or
a rug, adjust the feet in such a way as to allow a sufficient
ventilation space underneath the washing machine.

Connecting the electricity and water
supplies

Connecting the water inlet hose

1. Connect the supply pipe
by screwing it to a cold
water tap using a ¾ gas
threaded connection (see

figure).

Before performing the con­nection, allow the water to
run freely until it is perfectly
clear.

2. Connect the inlet hose
to the washing machine by
screwing it onto the corre­sponding water inlet of the
appliance, which is situa­ted on the top right-hand
side of the rear part of the
appliance (see figure).

3. Make sure that the hose is not folded over or bent.

! The water pressure at the tap must fall within the values

indicated in the Technical details table (see page 3).

! If the inlet hose is not long enough, contact a specialised

shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

Installation

! This instruction manual should be kept in a safe place for

future reference. If the washing machine is sold, transferred
or moved, make sure that the instruction manual remains
with the machine so that the new owner is able to familiari­se himself/herself with its operation and features.

! Read these instructions carefully: they contain vital infor-

mation relating to the safe installation and operation of the
appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its packaging.

2. Make sure that the washing machine has not been
damaged during the transportation process. If it has been
damaged, contact the retailer and do not proceed any
further with the installation process.

3. Remove the 4 protective
screws (used during tran­sportation) and the rubber
washer with the correspon­ding spacer, located on the
rear part of the appliance
(see figure).

4. Close off the holes using the plastic plugs provided.

5. Keep all the parts in a safe place: you will need them
again if the washing machine needs to be moved to ano­ther location.

! Packaging materials should not be used as toys for

children.

Levelling

1. Install the washing machine on a flat sturdy floor, without
resting it up against walls, furniture cabinets or anything
else.

2. If the floor is not perfectly
level, compensate for any
unevenness by tightening
or loosening the adjusta­ble front feet (see figure);
the angle of inclination,
measured in relation to the
worktop, must not exceed
2°.

GB

3

65 - 100 cm

Connecting the drain hose

Connect the drain hose,
without bending it, to a drai­nage duct or a wall drain
located at a height between
65 and 100 cm from the
floor;

alternatively, rest it on
the side of a washbasin
or bathtub, fastening the
duct supplied to the tap
(see figure). The free end
of the hose should not be
underwater.

! We advise against the use of hose extensions; if it is

absolutely necessary, the extension must have the same
diameter as the original hose and must not exceed 150 cm
in length.

Electrical connections

Before plugging the appliance into the electricity socket,
make sure that:

• the socket is earthed and complies with all applicable
laws;

• the socket is able to withstand the maximum power load
of the appliance as indicated on the Technical Data Plate
fixed on the machine;

• the power supply voltage falls within the values indicated
on the Technical Data Plate fixed on the machine;

• the socket is compatible with the plug of the washing
machine. If this is not the case, replace the socket or the
plug.

! The washing machine must not be installed outdoors,

even in covered areas. It is extremely dangerous to leave
the appliance exposed to rain, storms and other weather
conditions.

! When the washing machine has been installed, the elec-

tricity socket must be within easy reach.

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be replaced by autho-

rised technicians.

Warning! The company shall not be held responsible in the
event that these regulations are not respected.

The first wash cycle

Once the appliance has been installed, and before you use
it for the first time, run a wash cycle with detergent and no
laundry, using the wash cycle “Auto Clean” (see “Cleaning

the washing machine”).

Technical data

Model

WMD 923

Dimensions

width 59.5 cm
height 85 cm
depth 60,5 cm

Capacity

from 1 to 9 kg

Electrical

connections

please refer to the technical data plate
fixed to the machine

Water connections

maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)
drum capacity 71 litres

Spin speed

up to 1200 rotations per minute

Test wash cycles

in accordance

with directives

1061/2010 and

1015/2010

programme

;

temperature 60°C (2nd press of the button);

temperature 40°C (3rd press of the button).

This appliance conforms to the following
EC Directives:

- 2004/108/EC (Electromagnetic Compatibility)

- 2006/95/EC (Low Voltage)

- 2002/96/EC

4

GB

Detergent dispenser drawer: used to dispense deter-

gents and washing additives (see “Detergents and laundry”).

ON/OFF button : press this briefly to switch the ma­chine on or off. The START/PAUSE indicator light, which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off
during a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR buttons: used to set the
desired wash cycle (see “Table of wash cycles”).

MY CYCLE button: press and hold the button to store a
cycle with your own set of preferences in the memory of
the machine. To recall a previously stored cycle, press the
MY CYCLE button.

FUNCTION buttons: press the button to select the
desired function. The corresponding indicator light on the
display will switch on.

CLEANING ACTION

button : to select the desired

wash intensity.

ANTI ALLERGY RINSE

button : press to select

the desired rinse type.

SPIN button : press to reduce or completely exclude
the spin cycle - the value is indicated on the display.

TEMPERATURE button : press to decrease the tem-
perature: the value will be shown on the display.

CHILD LOCK button : to activate the control panel
lock, press and hold the button for approximately 2
seconds. When the symbol is illuminated, the control
panel is locked. This means it is possible to prevent wash
cycles from being modified accidentally, especially where
there are children in the home. To deactivate the control
panel lock, press and hold the button for approximately 2
seconds.

DELAY TIMER button : press to set a delayed start
time for the selected wash cycle. The delay time will be
shown on the display.

START/PAUSE button with indicator light: when the gre­en indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has started the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the symbol is not illuminated, the door
may be opened. To start the wash cycle from the point at
which it was interrupted, press the button again.

Standby mode

This washing machine, in compliance with new energy sa­ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.

Consumption in off-mode: 1 W
Consumption in Left-on: 1 W

Description of the washing machine

Control panel

TEMPERATURE

button

WASH

CYCLE

SELECTOR

buttons

Detergent dispenser drawer

FUNCTION

buttons

ON/OFF

button

SPIN SPEED

button

START/PAUSE

button with
indicator light

CHILD LOCK

button

DISPLAY

DELAY
TIMER

button

MY
CYCLE

button

CLEANING
ACTION

button

ANTI

ALLERGY

RINSE

button

GB

5

Display

The display is useful when programming the machine and provides a great deal of information.

The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in progress and all informa­tion relating to the progress status of the wash cycle.

String C shows the time remaining until the end of the wash cycle in progress and, if a DELAYED START has been set, the
time remaining until the start of the selected wash cycle.

String D shows the maximum spin speed value (this depends on the selected wash cycle); if the wash cycle does not include
a spin cycle, the string remains unused.

String E shows the maximum temperature value which may be selected (this depends on the wash cycle used); if the tempe­rature of the wash cycle cannot be modified, the string remains unused.

Indicator lights F correspond to the functions and light up when the selected function is compatible with the set wash cycle.

Door locked symbol
If the symbol is lit, this indicates that the washing machine door is locked to prevent it from being opened accidentally. To
prevent any damage from occurring, wait for the symbol to switch itself off before opening the appliance door.
N.B.: if the DELAYE TIMER function has been activated, the door cannot be opened; pause the machine by pressing the
START/PAUSE button if you wish to open it.

! The first time the machine is switched on, you will be asked to select the language and the display will automatically show

the language selection menu.
To select the desired language press the X and Y buttons; to confirm the selection press the Z button.
To change the language switch off the machine and press buttons X, Y, Z simultaneously until an alarm is heard: the
language-selection menu will be displayed again.

A

B

C

D

E

F

Z

X

Y

6

GB

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the On/Off

button ; the text POWER ON will appear on the
display and the START/PAUSE indicator light will flash
slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed
the maximum load value indicated in the table of
programmes on the following page.

3. MEASURE OUT THE DETERGENT. Open the

detergent dispenser drawer and pour the detergent into
the relevant compartments as described in “Detergents
and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the WASH

CYCLE SELECTOR buttons to select the required wash
cycle; the name of the wash cycle will appear on the
display. A temperature and spin speed is set for each
wash cycle; these may be adjusted. The duration of the
cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin

speed. The machine automatically selects the
maximum temperature and spin speed set for the
selected wash cycle; these values cannot therefore
be increased. The temperature can be decreased by
pressing the button, until the cold wash “OFF”
setting is reached. The spin speed may be progressively
reduced by pressing the button, until it is completely
excluded (the “OFF” setting). If these buttons are
pressed again, the maximum values are restored.

! Exception: if the

(60°C) (2nd press of the button)
programme is selected, the temperature can be
increased up to a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,
press the corresponding button repeatedly until the
required delay period has been reached. When this
option is enabled, the symbol lights up on the
display. To remove the delayed start function press the
button until the text “OFF” appears on the display.

Set the desired wash intensity.

Option makes it possible to optimise washing
based on the level of soil in the fabrics and on desired
wash cycle intensity.
Select the wash programme: the cycle will be
automatically set to “Normal” as optimised for garments
with an average level of soil (this setting is not applicable to
the “Wool” cycle, which is automatically set to “Delicate”).
For heavily-soiled garments press button until
the “Super Wash” level is reached. This level ensures
a high-performance wash due to a larger quantity of
water used in the initial phase of the cycle and due to
increased drum rotation. It is useful when removing the
most stubborn stains.
It can be used with or without bleach. If you wish to
bleach the items insert the additional compartment
(4) into compartment 1. When pouring the bleach, be
careful not to exceed the “max” level marked on the
central pivot (see figure pag. 8).

For lightly-soiled garments or a more delicate treatment
of the fabrics, press button “ ” until the “Delicate”
level is reached. The cycle will reduce the drum rotation
to ensure washing results are perfect for delicate
garments. If the current selection can be neither set nor
changed, the display will show “Not allowed”.

Set the rinse type.

Option makes it possible to select the desired rinse
type for sensitive skin. Press the button once for the
“Extra Rinse” level, which makes it possible to select
an additional rinse after the standard cycle rinse and
remove all traces of detergent. Press the button again
for the “Sensitive Skin” level, which makes it possible to
select two additional rinses to the standard cycle rinses; it
is recommended for very sensitive skin. Press the button
for the third time for the “Anti allergy Rinse” level, which
makes it possible to select three additional rinses to the
standard cycle rinses and remove major allergens such as
pollen, mites, cat and dog hair. Press the button again to
go back to the “Normal Rinse” rinse type. If the current
adjustment can be neither set nor changed, the display will
show “Not allowed”.

Modifying the cycle settings.

• Press the button to enable the function; the indicator
light corresponding to the button will switch on.

• Press the button again to disable the function; the
indicator light will switch off.

! If the selected function is not compatible with the

programmed wash cycle, the indicator light will flash
and the function will not be activated.

! If the selected function is not compatible with

another function which has been selected previously,
the indicator light corresponding to the first function
selected will flash and only the second function will
be activated; the indicator light corresponding to the
enabled function will remain lit.

! The functions may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/PAUSE
button. The corresponding indicator light will become
green, remaining lit in a fixed manner, and the door will be
locked (the DOOR LOCKED symbol will be on). During
the wash cycle, the name of the phase in progress will
appear on the display. To change a wash cycle while
it is in progress, pause the washing machine using the
START/PAUSE button (the START/PAUSE indicator light
will flash slowly in an orange colour); then select the
desired cycle and press the START/PAUSE button again.
To open the door while a cycle is in progress, press
the START/PAUSE button; if the DOOR LOCKED
symbol is switched off the door may be opened. Press
the START/PAUSE button again to restart the wash cycle
from the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be
indicated by the text “END OF CYCLE” on the display;
when the DOOR LOCKED symbol switches off
the door may be opened. Open the door, unload the
laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the button. The cycle will be stopped
and the machine will switch off.

GB

7

Wash cycles and functions

Wash functions

Time Saver

If you select this option, the wash cycle duration will be redu­ced by up to 50%, depending on the selected cycle, thereby
guaranteeing simultaneous water and energy saving. Use this
cycle for lightly soiled garments.

! It cannot be used with the , “Fastwash 60’”, , , .

Easy Iron

By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform
slow rotations of the drum; the “Easy Iron” indicator light
will flash and the text “END OF CYCLE” will appear on the
display. To end the cycle, press the START/PAUSE button
or the “Easy Iron” button.

! It cannot be used with the , “Fastwash 30’”, , ,

“Fast spin Resistents” and “Pump out”.

Table of wash cycles

Eco Wash

The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to
the environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.

! It cannot be used with the , (90°C), , , , .

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can
vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any
wash options selected.

For all Test Institutes:

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 60°C (2nd press of the button); set wash cycle 40°C (3rd press of the button).

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value.

2) Long wash cycle for cottons: set wash cycle 40°C (3rd press of the button).

3) Short wash cycle for cottons: set wash cycle ; temperature of 40°C (press TEMPERATURE button).

4) Long wash cycle for synthetics: set wash cycle 60°C (1st press of the button); temperature of 40°C (press TEMPERATURE button).

Wash cycles

Description of the wash cycle

Max.

temp.

(°C)

Max.

speed

(rpm)

Detergents

Max. load

(kg)

Residual

dampness %

Energy

consumption

kWh

Total water lt

Cycle dura-

tion

PreWash

Wash

Bleach

Fabric

softener

Anti Stain

40° 1200 -



-



6 - - - 190’

Cotton Prewash (1st press of the button): extremely soiled whites
and resistant colours.

90° 1200

 

-



9 53 2,01 101 205’

White Cottons (1) (2nd press of the button): heavily soiled whites
and delicate colours.

60°

(Max. 90°C)

1200 -

  

9 53 1,09 79 175’

Cottons Coloured (1-2) (3rd press of the button): lightly soiled whi-
tes and delicate colours.

40° 1200 -

  

9 53 0,85 82 170’

Synthetics Resistant (1st press of the button): heavily soiled resi-
stant colours.

60° 800 -

  

5 48 0,99 57 115’

Synthetics Resistant (4) (1st press of the button): heavily soiled
resistant colours.

40° 800 -

  

5 48 0,63 55 95’

Synthetics Delicate (2nd press of the button): lightly soiled resistant
colours.

40° 800 -

  

5 - - - 80’

Fastwash 60' (1st press of the button): to refresh normal soiled
garments quickly (not suitable for wool, silk and clothes which
require washing by hand).

60° 1200 -



-



4 53 0,54 57 60’

Fastwash 30' (2nd press of the button): to refresh lightly soiled
garments quickly (not suitable for wool, silk and clothes which
require washing by hand).

30° 800 -



-



4 71 0,21 41 30’

M

My Cycle: allows for any wash cycle to be stored.

Bed & Bath (3): washes bathroom laundry and bedlinen. 60° 1200 -



-



9 - - - 150’

Woolmark Platinum (Wool): for wool, cashmere, etc. 40° 800 -



-



2,5 - - - 100’

Ultradelicates

30° 0 -



-



1 - - - 80’

Fast spin Cottons (1st press of the button) - 1200 - - - - 9 - - - 16’

Rinse Cottons (2nd press of the button) - 1200 - - -



9 - - - 49’

Pump out (3rd press of the button) - 0 - - - - 9 - - - 2’

8

GB

Detergent dispenser drawer

Good washing results also depend on the correct dose of
detergent: adding too much detergent will not necessarily
result in a more efficient wash, and may in fact cause a
build up on the inside of your appliance and contribute to
environmental pollution.

! Use powder detergent for white cotton garments, for pre­washing, and for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

! Do not use hand washing detergents; they create too

much foam.

Open the detergent di­spenser drawer and pour
in the detergent or washing
additive, as follows.

compartment 1: Pre-wash detergent (powder)

Before pouring in the detergent, make sure that extra com­partment 4 has been removed.

compartment 2: Detergent for the wash cycle
(powder or liquid)

If liquid detergent is used, it is recommended that the
removable plastic partition A (supplied) be used for proper
dosage.
If powder detergent is used, place the partition into slot B.

compartment 3: Additives (fabric softeners, etc.)

The fabric softener should not overflow the grid.

extra compartment 4: Bleach

Preparing the laundry

• Divide the laundry according to:

- the type of fabric/the symbol on the label

- the colours: separate coloured garments from whites.

• Empty all garment pockets and check the buttons.

• Do not exceed the listed values, which refer to the weight
of the laundry when dry:

Durable fabrics: max. 9 kg
Synthetic fabrics: max. 5 kg
Wool: max. 2,5 kg

Silk: max. 2,5 kg

How much does your laundry weigh?

1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1200 g
1 towel 150-250 g

Special wash cycles

Anti Stain : this programme is suitable to heavily-soiled
garments with resistant colours. It ensures a washing
class that is higher than the standard class (A class). When
running the programme, do not mix garments of different
colours. We recommend the use of powder detergent.
Pre-treatment with special additives is recommended if
there are obstinate stains.
Bed & Bath: use programme to wash bed linen and
towels in one single cycle: it optimises softener performan­ce and helps you save time and energy. We recommend
the use of powder detergent.
Wool: the wool wash cycle on this Hotpoint-Ariston
machine has been tested and approved by The Woolmark
Company for washing wool garments labelled as hand
washable provided that the garments are washed
according to the instructions on the garment label and
those issued by the manufacturer of this washing machine.
Hotpoint-Ariston is the first washing machine brand to be
approved by The Woolmark Company for Apparel Care­Platinum for its washing performance and consumption of
energy and water. (M1135)

ltradelicates: use programme to wash very delicate
garments having strasses or sequins.
To wash Silk garments and Curtains select the cycle
and set the “Delicate” level from option .
We recommend turning the garments inside out before
washing and placing small items into the special bag
for washing delicates. Use liquid detergent on delicate
garments for best results.

Load balancing system

Before every spin cycle, to avoid excessive vibrations and
to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the
washing rotation speed. If, after several attempts, the load
is not balanced correctly, the machine spins at a reduced
spin speed. If the load is excessively unbalanced, the
washing machine performs the distribution process instead
of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are
mixed in the load.

M

AX

1

2

4

3

A

B

Detergents and laundry