Page 1
Use and Care guide
www.hotpoint.eu/register
Page 2
2
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Page 3
EN
3
ENGLISH
HEALTH & SAFETY, USE & CARE AND INSTALLATION GUIDE
THANK YOU FOR PURCHASING AN HOTPOINT - ARISTON PRODUCT
To receive more comprehensive help and support, please register your
product at www.hotpoint.eu/register
Index
Health and Safety guide
SAFETY INSTRUCTIONS ..................................................................................4
SAFEGUARDING THE ENVIRONMENT ....................................................................6
DECLARATION OF CONFORMITY .........................................................................6
Use and Care guide
PRODUCT DESCRIPTION ...............................................................................7
CONTROL PANEL ........................................................................................8
DESCRIPTION OF DISPLAY ...............................................................................8
ACCESSORIES ...........................................................................................9
INSERTING THE WIRE SHELF AND OTHER ACCESSORIES ..................................................9
FUNCTIONS ............................................................................................10
HOW TO USE THE OVEN ................................................................................11
COOKING TABLE ........................................................................................16
TESTED RECIPES ........................................................................................18
CLEANING .............................................................................................19
MAINTENANCE ........................................................................................20
TROUBLESHOOTING ....................................................................................24
PRODUCT FICHE ........................................................................................25
AFTERSALES SERVICE ..................................................................................25
Installation guide ......................................................................................26
Page 4
4
SAFETY INSTRUCTIONS
IMPORTANT TO BE READ
AND OBSERVED
Before using the appliance read
these safety instructions.
Keep them for future reference.
These instructions and the
appliance itself provide
important safety warnings, to be
observed at all times.
The manufacturer declines any
liability for failure to observe
these safety instructions, for
inapropriate use of the appliance
or incorrect setting of controls.
SAFETY WARNINGS
Very young (0-3 years) and
young children (3-8 years) shall
be kept away from the appliance
unless continuously supervised.
Children from 8 years old and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge can use this
appliance only if they are
supervised or have been given
instructions on safe use and
understand the hazards
involved. Children must not play
with the appliance. Cleaning and
user maintenance must not be
carried out by children without
supervision.
WARNING: The appliance and
its accessible parts become hot
during use, children less than 8
year of age shall be kept away
unless continuously supervised.
WARNING: Avoid touching
heating elements or interior
surface - risk of burns.
Never leave the appliance
unattended during food drying.
If the appliance is suitable for
probe usage, only use the
temperature probe
recommended for this oven.
Keep clothes or other ammable
materials away from the
appliance, until all the
components have cooled down
completely.
Overheated oils and fats catch
re easily. Always be vigilant
when cooking food rich in fat, oil
or when adding alcohol (e.g.
rum, cognac, wine) - risk of re.
Use oven gloves to remove pans
and accessories, taking care not
to touch the heating elements.
At the end of cooking, exercise
caution when opening the door,
by letting the hot air or steam
exit gradually before accessing
the appliance.
Do not obstruct hot air vents at
the front of the oven.
PERMITTED USE
CAUTION: The appliance is not
intended to be operated by
means of an external timer or
separate remote controlled
system.
This appliance is solely for
domestic, not professional use.
Do not use the appliance
outdoors.
Do not store explosive or
ammable substances such as
aerosol cans and do not place or
use gasoline or other ammable
materials in or near the
appliance: a re may break out if
the appliance is inadvertently
switched on.
No other use is permitted
(e.g.heating rooms).
INSTALLATION
The appliance must be handled
and installed by two or more
persons. Use protective gloves
to unpack and install the
appliance.
Installation and repairs must be
carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part of
the appliance unless specically
stated in the user manual.
Children should not perform
installation operations. Keep
children away during
installation. Keep the packaging
materials (plastic bags,
polystyrene parts, etc.) out of
reach of children, during and
after the installation.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest Aftersales Service.
The appliance must be
disconnected from the power
supply before any installation
operation.
During installation, make sure
the appliance does not damage
the power cable.
Only activate the appliance
when the installation has been
completed.
After installation, the bottom of
the appliance must no longer be
accessible.
Carry out all cabinet cutting
works before tting the
appliance in the furniture and
carefully remove all wood chips
and sawdust.
Do not obstruct the minimum
gap between the worktop and
the upper edge of the oven.
Only remove the oven from its
polystyrene foam base at the
time of installation.
Do not install the appliance
behind a decorative door - Risk
of re.
ELECTRICAL WARNINGS
For installation to comply with
current safety regulations, an
omnipolar switch with minimum
contact gap of 3 mm is required
and the appliance must be
earthed.
If the power cable is damaged,
replace with an identical one.
The power cable must only be
replaced by a qualied
technician in compliance with
the manufacturer instruction
and current safety regulations.
Contact an authorized service
center.
It must be possible to
disconnect the appliance from
the power supply by unplugging
Health and Safety guide
Page 5
EN
5
it if plug is accessible, or by
means of an accessible multipole switch installed upstream
of the socket in conformity with
national electrical safety
standards.
The rating plate is on the front
edge of the oven (visible when
the door is open).
In case of replacement of power
cable, contact an authorized
service center.
If the tted plug is not suitable
for your socket outlet, contact a
qualied technician.
The power cable must be long
enough to connect the
appliance, once tted in its
housing, to the main power
supply. Do not pull the power
supply cable.
Do not use extension leads,
multiple sockets or adapters.
Do not operate this appliance if
it has a damaged mains cord or
plug, if it is not working properly,
or if it has been damaged or
dropped. Keep the cord away
from hot surfaces.
The electrical components must
not be accessible to the user
after installation.
Do not touch the appliance with
any wet part of the body and do
not operate it when barefoot.
CLEANING AND
MAINTENANCE
Never use steam cleaning
equipment.
WARNING: Ensure that the
appliance is switched o before
replacing the lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the appliance door glass
since they can scratch the
surface, which may result in
shattering of the glass.
Wear protective gloves for
cleaning and maintenance.
The appliance must be
disconnected from the power
supply before any maintenance
operation.
Ensure the appliance is cooled
down before carrying out any
cleaning or maintenance
operation.
Page 6
6
DECLARATION OF CONFORMITY
SAFEGUARDING THE ENVIRONMENT
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with the
recycle symbol
. The various parts
of the packaging must therefore be
disposed of responsibility and in full
compliance with local authority
regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance, make
it unusable by cutting o the power
cable and removing the doors and
shelves (if present) so that children
cannot easily climb inside and become
trapped.
This appliance is manufactured with
recyclable
or reusable materials.
Dispose of it in accordance with local
waste disposal regulations.
For further information on the
treatment, recovery and recycling of
household electrical appliances,
contact your competent local
authority, the collection service for
household waste or the store where
you purchase the appliance.
This appliance is marked in
compliance with European Directive
2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE).
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
The symbol
on the product or on
the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
to an appropriate collection center for
the recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
Only preheat the oven if specied in
the cooking table or your recipe.
Use dark lacquered or enamelled
baking moduls as they absorb heat far
better.
This appliance has been designed,
constructed and distributed in
compliance with the requirements of
European Directives:
LVD 2014/35/EU, EMC 2014/30/EU and
Ro HS 2 011/ 6 5/E U .
This appliance, which is intended to
come into contact with foodstus,
complies with European Regulation
n.1935/2004.
This appliance meets the Eco Design
requirements of European Regulations
n.65/2014, and n.66/2014 in
conformity to the European standard
EN60350-1.
Page 7
EN
7
PRODUCT
DESCRIPTION
Use and Care guide
Please note:
The cooling fan may switch itself on every so often during cooking in order to reduce energy consumption.
Once cooking is complete and the oven has been switched off, the cooling fan may continue to run for a certain period
of time.
1. Control panel
2. Fan
3. Light
4. Runners for accessories
(the level is indicated on the wall
of the cooking compartment)
5. Door
6. Upper heating element/grill
7. Identification plate
(do not remove)
8. Lower heating element
(not visible)
1
2
3
4
5
7
8
6
Page 8
8
DESCRIPTION OF DISPLAY
CONTROL PANEL
1. SELECTION KNOB
For switching the oven on by
selecting a function.
Turn to the
position to switch the
oven o.
2. LIGHT
With the oven switched on, press to
turn the oven compartment lamp
on or o.
3. TIME SETTING
For accessing the cooking time
settings, delayed start and timer. For
displaying the time when the oven
is o.
4. DISPLAY
5. ADJUSTMENT BUTTONS
For changing the cooking time
settings.
6. THERMOSTAT KNOB
Turn to select the temperature you
require when activating manual
functions. Automatic functions use
.
1. Preheating symbol
2. Clock; information and
function duration
3. Kitchen timer
4. End of cooking time
5. Duration
6. Clock
1 32 4 5
6
1
6 5 4 3
2
Page 9
EN
9
ACCESSORIES
WIRE SHELF BAKING TRAY
Use for cooking food or as
a support for cooking pots,
baking pans and other
items of ovenware. Useful
for grilling bread, meat,
fish and vegetables.
Use for cooking all bread
and pastry products, but
also for roasts, fish en
papillotte, etc.
The number of accessories may vary depending on which model is purchased.
ADDITIONAL ACCESSORIES: Other accessories that are not supplied can be purchased separately from the After-sales
Service.
INSERTING THE WIRE SHELF AND OTHER ACCESSORIES
• Insert the wire shelf onto the level you require
by holding it tilted slightly upwards and resting
the raised rear side (pointing upwards) down first.
Then slide it horizontally along the runners as far as
possible.
• The other accessories, such as the baking tray,
are inserted horizontally by sliding them along the
runners.
Page 10
10
CONVENTIONAL*
For cooking any kind of dish on one shelf
only. Use the 3rd shelf. If roasting a joint of meat
or cooking a pasta bake, however, use the 2nd
level. Preheat the oven before placing food
inside.
CONVECTION BAKE
For cooking on a maximum of two shelves
at the same time. Use the 2nd shelf to cook
on one shelf only. To cook on two shelves, we
recommend using the 2nd and 4th shelves. It is
a good idea to swap the position of the baking
trays halfway through cooking. Preheat the oven
before placing food inside.
GRILL
For grilling steaks, kebabs and sausages,
cooking vegetables au gratin or toasting bread.
We suggest placing food on the 5th shelf. When
grilling meat, we recommend using a baking
tray to collect the cooking juices: Position it on
the 4th shelf, adding approx. 200 ml of drinking
water. Preheat the oven for 3-5 minutes. The oven
door must remain closed during cooking.
TURBO GRILL
For roasting large joints of meat (legs, roast
beef, chicken). Place food on the 2nd shelf. We
recommend using a baking tray to collect the
cooking juices: Position it on the 1st shelf, adding
approx. 200 ml of drinking water. The oven door
must remain closed during cooking.
ECO FORCED AIR*
For cooking (stuffed) roasting joints on one
shelf only. This function uses gentle, intermittent
air circulation to prevent food from drying out
excessively. When this ECO MODE function is
in use, the light will remain switched off during
cooking but can be switched on again by
pressing
. To maximise energy efficiency, we
advise against opening the door during cooking.
We recommend using the 3rd shelf. The oven
does not need to be preheated beforehand.
FUNCTIONS
BREAD AUTO
Use this function when baking bread. For
best results, we recommend following the recipe
carefully. This function automatically selects the
ideal temperature and baking time for bread.
Cooking will stop automatically and the oven
will make a sound when the food is cooked.
Activate the function when the oven is cold. If
the temperature inside the oven is hotter than
that which has been set, the message “Hot” will
appear on the display and you will not be able to
start cooking. You will need to wait until the oven
has cooled down.
DESSERT AUTO
Use this function to bake cakes with or
without chemical leaveners. Put the item in
the oven when the oven is cold. This function
automatically selects the ideal temperature
and baking time for cakes. Cooking will stop
automatically and the oven will make a sound
when the food is cooked. Activate the function
when the oven is cold. If the temperature inside
the oven is hotter than that which has been set,
the message “Hot” will appear on the display and
you will not be able to start cooking. You will
need to wait until the oven has cooled down.
DIAMOND CLEAN
The action of the steam released during this
special low-temperature cleaning cycle allows
dirt and food residues to be removed with ease.
Pour 200 ml of drinking water on the bottom of
the oven and only activate the function when the
oven is cold.
* Function used as reference for the energy eciency
declaration in accordance with Regulation (EU) No. 65/2014
Page 11
EN
11
HOW TO USE
THE OVEN
Before using the appliance carefully read the Health and Safety guide.
USING THE APPLIANCE FOR THE FIRST TIME
1. SETTING THE TIME
You will need to set the time when you switch on the
appliance for the first time: Press
until the
icon and the two digits for the hour start flashing on
the display.
Use or to set the hour and press to confirm.
The two digits for the minutes will start flashing. Use
or to set the minutes and press to confirm.
Notes: When the icon is ashing, for example following
lengthy power outages, you will need to reset the time.
2. REHEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 250° C for about one hour,
preferably using the “Convection bake” function. The
oven must be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
Page 12
12
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: The display will
light up and an audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
Please note: During cooking you can change the function
by turning the selection knob or adjust the temperature by
turning the thermostat knob.
The function will not start if the thermostat knob is on 0 °C.
You can set the cooking time, cooking end time (only if you
set a cooking time) and a timer.
AUTOMATIC
To start the automatic function you have selected
(“Bread” or “Dessert”), keep the thermostat knob at the
position for automatic functions
.
To finish cooking, turn the selection knob to position 0.
Please note: You can set the cooking end time and timer.
3. PREHEATING
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the
fixed icon
on the display will indicate that the oven
has reached the set temperature: At this point, place
the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the icon and “00:00” start
flashing on the display.
Use or to set the cooking time you require, then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: An audible signal will
sound and the display will indicate that cooking is
complete.
Notes: To cancel the cooking time you have set, keep
pressing until the icon starts ashing on the display,
then use to reset the cooking time to “00:00”.
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: Press
until the icon and the current time
start flashing on the display.
Use or to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: The function will
remain paused until it starts automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set.
Notes: To cancel the setting, switch the oven o by turning
the selection knob to position “ ”.
DAILY USE
Page 13
EN
13
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to position “
” to switch the oven off.
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
. SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off.
Keep pressing
until the icon and “00:00” start
flashing on the display.
Use or to set the time you require and press
to confirm.
An audible signal will sound once the timer has
finished counting down the selected time.
Please note: To cancel the timer, keep pressing until the
icon starts ashing, then use to reset the time to “00:00”.
. DIAMOND CLEAN FUNCTION
To activate the “Diamond Clean” cleaning function,
pour 200 ml of drinking water into the bottom of
the oven, then turn the selection knob and the
thermostat knob to the
icon.
The function will activate automatically: the display
shows the time remaining to the end, alternating with
“DC”.
Please note: It is only possible to programme the end time
of this function. The duration is automatically set to 35
minutes.
Page 14
14
USEFUL TIPS
HOW TO READ THE COOKING TABLE
The table indicates the best function to use for any
given food, to be cooked on one or more shelves
at the same time. Cooking times start from the
moment food is placed in the oven, excluding preheating (where required). Cooking temperatures
and times are purely for guidance and will depend
on the amount of food and type of accessory used.
Use the lowest recommended settings to begin
with and, if the food is not cooked enough, then
switch to higher settings. Use the accessories
supplied and preferably dark-coloured metal cake
tins and baking trays. You can also use Pyrex pans
and accessories or ones made from china, but bear
in mind that cooking times will be slightly longer.
For best results, follow the recommendations in the
cooking table carefully when selecting which of
the supplied accessories to place on which of the
shelves.
COOKING DIFFERENT FOODS AT THE SAME TIME
Using the “Convection Bake” function, you can cook
different foods simultaneously (for example: fish
and vegetables), using different shelves. Switch
shelves two thirds of the way through cooking,
if necessary. Remove the food which requires a
shorter cooking time and leave the food which
requires a longer cooking time in the oven.
DESSERTS
- Cook delicate desserts with the conventional
function on one shelf only. Use dark-coloured
metal baking pans and always place them on the
wire shelf supplied. To cook on more than one
shelf, select the “Forced Air” function and position
the baking pans on different shelves to facilitate
the circulation of hot air.
- Use dark-coloured metal baking pans and always
place them on the wire shelf supplied.
- To check whether a leavened cake is cooked,
insert a wooden toothpick into the centre of the
cake. If the toothpick comes out clean, the cake is
ready.
- If using non-stick cake tins, do not butter
the edges as the cake may not rise evenly around
the edges.
- If the item “swells” during baking, use a lower
temperature next time and consider reducing the
amount of liquid you add or stirring the mixture
more gently.
- For desserts with moist fillings or toppings (such
as cheesecake or fruit tarts), use the “Convection
bake” function. If the base of the cake is soggy,
lower the shelf and sprinkle the bottom of the cake
with breadcrumbs or biscuit crumbs before adding
the filling.
MEAT
- Use any kind of oven tray or pyrex dish suited
to the size of the piece of meat being cooked.
For roast joints, it is best to add some stock to
the bottom of the dish, basting the meat during
cooking for added flavour. Please note that steam
will be generated during this operation. When the
roast is ready, let it rest in the oven for another 1015 minutes, or wrap it in aluminium foil.
- When grilling pieces of meat, choose cuts of the
same thickness to obtain even cooking. Very thick
pieces of meat require longer cooking times. To
prevent the meat from burning on the outside,
lower the position of the wire shelf, keeping the
food farther away from the grill. Turn the meat two
thirds of the way through cooking. Take care when
opening the door as steam will escape.
To collect the cooking juices, we recommend
placing a dripping pan filled with 200 ml of
drinking water directly underneath the wire shelf
on which the food is placed. Refill as necessary.
PIZZA
Lightly grease the trays to ensure the pizza has a
crispy base. Scatter the mozzarella over the pizza
two thirds of the way through cooking.
BREAD AUTO FUNCTION
Use this function when baking bread: For best
results, follow the instructions given in the recipe
carefully.
Recipe for 1000 g of dough:
600 g of flour, 360 g of water, 11 g of salt, 25 g of
fresh yeast (or two packets of yeast powder).
Method:
- Mix the flour and salt together in a large bowl.
- Dilute the yeast in the water (this must be slightly
warm – around 35° C).
- Make a well in the flour and add the water/
yeast mixture, then work into a smooth, slightly
sticky dough. Knead the dough with your hands,
stretching it out and folding it over for around 10
minutes. Shape the dough into a ball and leave it
to rise in a bowl covered with a transparent lid to
prevent the surface of the dough from drying out.
- Wait until the dough has doubled in volume:
Allow about 90 minutes at room temperature to
achieve optimum raising.
- Divide the dough into one or two loaves, sprinkle
with flour and make little cuts on the surface. Then
Page 15
EN
15
place the bread on a baking tray lined with baking
parchment.
- Place the dough in the (cold) oven, pour 100 ml
of cold drinking water onto the bottom of the
oven and activate the “Bread Auto” function. After
cooking, leave the dough to stand on a wire shelf
until completely cooled.
Page 16
16
COOKING TABLE
RECIPE FUNCTION PREHEAT. TEMPERATURE (°C) COOK TIME (MIN.)
LEVEL AND
ACCESSORIES
Leavened cakes
Yes 160-180 30-90
2/3
Yes 160-180 30 - 90 ***
4
1
Filled cake
(cheesecake, strudel, fruit pie)
Yes 160 – 200 35 - 90
2
Yes 160–200 35 - 90 ***
4
2
Biscuits/tartlets
Yes 170 - 180 15 - 45
3
Yes 160-180 20-45 ***
4
2
Choux buns
Yes 180 - 220 30-40
3
Yes 180 -190 35-45 ***
4
2
Meringues
Yes 90 150 - 200
3
Yes 90 140 - 200
4
2
Bread - - 60
2
Bread/pizza/focaccia
Yes 190 -250 15 -50
2
Yes 190 -250 25-50 ***
4 2
Frozen pizza
Yes 250 10 - 15
3
Yes 250 10 - 20 ***
4 2
Salty cakes
(vegetable pie, quiche)
Yes 175 - 200 45 - 60
3
Yes 175 - 200 45 - 60 ***
4 2
Vols-au-vents/pu pastry crackers
Yes 19 0-200 20-30
3
Yes 180 - 190 15 - 40 ***
4 2
Lasagna/baked pasta/cannelloni/
ans
Yes 190 - 200 45 - 65
2
Lamb/veal/beef/pork 1 kg Yes 190 - 200 80 - 110
3
ACCESSORIES
Rack
Baking dish or baking tray
on the wire shelf
Baking tray / oven tray on
wire shelf
Baking tray with 200 ml of
water
BAKIN G TR AY
FUNCTIONS
Conventional Grill Turbo Grill Convection Bake Bread Auto Eco Forced Air
Page 17
EN
17
RECIPE FUNCTION PREHEAT. TEMPERATURE (°C) COOK TIME (MIN.)
LEVEL AND
ACCESSORIES
Chicken/rabbit/duck 1 kg Yes 200 - 230 50 - 100
2
Turkey/goose 3 kg - 190 - 200 100 - 160
2
Baked sh/en papillote (llet, whole) Yes 170 - 190 30 - 50
2
Stued vegetables
(tomatoes, courgettes, aubergines)
Yes 180 - 200 50 - 70
2
Toasted bread 5’ 250 2 - 6
5
Fish llets/slices - 230 - 250 15 - 30 *
4 3
Sausages/kebabs/spare ribs/
hamburgers
- 250 15 - 30 *
5 4
Roast chicken 1-1.3 kg Yes 200 - 220 55 -70 **
2
1
Roast beef rare 1 kg Yes 200 - 210 35 - 50 **
3
Leg of lamb/knuckle Yes 200 - 210 60-90 **
3
Roast potatoes Yes 200 - 210 35-55 **
3
Vegetable gratin - 200 - 210 25 - 55
3
Lasagna and meat Yes 200 50 - 100 ****
4 1
Meat and potatoes Yes 19 0-200 45 - 100 ****
4 1
Fish and vegetables Yes 180 30 - 50 ****
4 1
Roast meat/stued roasting joints - 170 - 180 100 - 150
2
ACCESSORIES
Rack
Baking dish or baking tray
on the wire shelf
Baking tray / oven tray on
wire shelf
Baking tray with 200 ml of
water
BAKIN G TR AY
FUNCTIONS
Conventional Grill Turbo Grill Convection Bake Bread Auto Eco Forced Air
Page 18
18
RECIPE FUNCTION PREHEAT. LEV
TEMP.
(°C)
COOK
TIME
(MIN.)
ACCESSORIES* AND NOTES
Shortbread
Yes 3 150 30-40 Drip tray/baking tray
Yes 3 150 35-45 Drip tray/baking tray
Yes 2 - 4 16 0 30-40
Lev. 4: baking tray
Lev. 2: Drip tray/baking tray
Small cakes
Yes 3 160 25 - 35 Drip tray/baking tray
Yes 3 160 25 - 35 Drip tray/baking tray
Yes 2 - 4 150 35-45
Lev. 4: baking tray
Lev. 2: Drip tray/baking tray
Fatless
sponge cake
Yes 3 170 35-45 Cake tin on wire shelf
Yes 2 160 35-45 Cake tin on wire shelf
Yes 1 - 4 16 0 45 - 55
Lev. 4: Cake tin on wire shelf
Lev. 1: Cake tin on wire shelf
2 apple pies
Yes 2 185 70 - 90 Cake tin on wire shelf
Yes 2 175 70 - 90 Cake tin on wire shelf
Yes 1 - 4 175 75 - 95
Lev. 4: Cake tin on wire shelf
Lev. 1: Cake tin on wire shelf
Toast
5 min 5 250 2 - 5 Wire shelf
Hamburgers
5 min 5 250 18 - 30
Lev. 5: Wire shelf (turn food halfway
through cooking)
Lev. 4: Baking tray with water
* You can obtain any accessories that are not
supplied from our After-sales service.
Energy eciency class (in accordance with the IEC
60350-1 standard): Refer to the specic table to
conduct the test.
TESTED RECIPES
Compiled for the certification authorities in
accordance with the standard IEC 60350-1
FUNCTIONS
Conventional Grill Turbo Grill Convection Bake Bread Auto Eco Forced Air
Page 19
EN
19
CLEANING
ACCESSORIES
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required
operations with the oven cold.
Disconnect the oven from the
power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Do not use corrosive or abrasive detergents. If
any of these products inadvertently comes into
contact with the surfaces of the appliance, clean
immediately with a damp microfibre cloth.
Soak the accessories in a washing-up liquid
solution after use, handling them with oven gloves
if they are still hot.
Food residues can be removed using a washing-up
brush or a sponge.
INTERIOR SURFACES
. After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove
any deposits or stains caused by food residues. To
dry any condensation that has formed as a result
of cooking foods with a high water content, let the
oven to cool completely and then wipe it with a
cloth or sponge.
. Activate the “Diamond Clean” function for
optimum cleaning of the internal surfaces.
. The door can be easily removed and refitted to
facilitate cleaning of the glass.
• Clean the glass in the door with a suitable liquid
detergent.
. The top heating element of the grill can be
lowered to clean the upper panel of the oven.
Page 20
20
4. Take a firm hold of the door with both hands –
do not hold it by the handle.
Simply remove the door by continuing to close it
while pulling it upwards at the same time until it is
released from its seating.
5.
a
b
~15°
Put the door to one side, resting it on a soft
surface.
1. Open the door fully.
2.
Lower the catches as far as possible.
3.
b
a
Close the door as much as you can.
~60°
REMOVING THE DOOR
Use protective gloves during all
operations.
Carry out the required
operations with the oven cold.
Disconnect the oven from the
power supply.
MAINTENANCE
Page 21
EN
21
REFITTING THE DOOR
5. Try closing the door and check to make sure
that it lines up with the control panel. If it does not,
repeat the steps above: The door could become
damaged if it does not work properly.
6.
1. Move the door towards the oven, aligning the
hooks of the hinges with their seating.
2.
Secure the upper part into its seating.
3.
Lower the door and then open it fully.
4.
Lower the catches into their original position:
Make sure that you lower them down completely.
b
a
Page 22
22
CLICK TO CLEAN - CLEANING THE GLASS
3. To correctly reposition the inner glass, make
sure that the “R” is visible in the right-hand corner
and the clear surface (not printed) is facing up.
First insert the long side of the glass indicated
by “R” into the support seats, then lower it into
position.
Refit the upper edge: A click will indicate correct positioning. Make sure the seal is secure before refitting
the door.
4. Refit the upper edge: A click will indicate
correct positioning. Make sure the seal is secure
before refitting the door.
1. After removing the door and resting it
on a soft surface with the handle downwards,
simultaneously press the two retaining clips and
remove the upper edge of the door by pulling it
towards you.
2. Lift and firmly hold the inner glass with both
hands, remove it and place it on a soft surface
before cleaning it.
Page 23
EN
23
REPLACING THE LIGHT
1. Disconnect the oven from the power supply.
2. Unscrew the cover from the light, replace the
bulb and screw the cover back on the light.
3. Reconnect the oven to the power supply.
Please note: Use 25 W/230 V type G9, T300 °C halogen
lamps.
The bulb used in the product is specifically designed for
domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009).
Light bulbs are available from our After-sales Service.
- Do not handle bulbs with your bare hands as your
fingerprints could damage them. Do not use the oven
until the light cover has been refitted.
LOWERING THE UPPER HEATING ELEMENT
1. Remove the heating element from its seating.
2. Lower the heating element.
3. To return the heating element to its position,
lift it up, pull it slightly towards you and make sure
that the tab support is in its proper seating.
Page 24
24
TROUBLESHOOTING
Any problems or malfunctions that may occur can often be easily resolved.
Before contacting the After-sales Service, check the following table to see whether you can resolve the
problem yourself.
If the problem persists, contact your nearest After-sales Service Centre.
Read the safety instructions carefully
before carrying out any of the following work
PROBLEM POSSIBLE CAUSE REMEDY
The oven is not working.
Disconnection from the mains
electricity.
Fault.
Make sure that the oven is connected
to the main electricity supply.
Turn off the oven and restart it to see if
the fault persists.
The display is showing the
message “Hot” and the selected
function will not start.
Temperature too high.
Allow the oven to cool down before
activating the function. Select a dierent
function.
Cooking will not start.
Temperature not set/thermostat
knob in the wrong position.
Turn the thermostat knob to the
temperature or the position you require
to activate the function you have
selected.
The time is ashing. Power cut.
You need to reset the time: Follow the
instructions given in the “Using the
appliance for the rst time” section.
The display shows the letter “F”
followed by a number.
Software fault.
Contact you nearest Client After-sales
Service Centre and state the number
following the letter “F”.
The light is not working.
O v en OF F.
Bulb gone.
Turn the selection knob to select a
function and switch on the oven.
If the fault persists, follow the
instructions for replacing the bulb given
in the “Maintenance” section.
Page 25
EN
25
AFTER-SALES
SERVICE
BEFORE CONTACTING OUR AFTERSALES SERVICE
IF THE PROBLEM PERSISTS AFTER HAVING
PERFORMED ALL OF THE NECESSARY CHECKS,
CONTACT YOUR NEAREST AFTER-SALES SERVICE
CENTRE.
1. Check whether you can resolve the problem
yourself using any of the measures described in the
“Troubleshooting” section.
2. Turn off the oven and restart it to see if the fault
persists.
To receive assistance, call the number given on
the warranty leaflet enclosed with the product or
follow the instructions on our website. Be prepared
to provide:
• A brief description of the fault
• The exact type of model of your product
• The assistance code (the number following the
word SERVICE on the identification plate attached
to the product; this can be seen on the left-hand
edge of the cooking compartment when the oven
door is open).
• Your full address
• A contact telephone number
XXXXXX XXXXXX XXXXX XXXXXXX
Model: xxxXXXXxx
XXXXXX
XXXX
X
XXX
XXXX
X
X
X
XXX
XXXX
X
X
Please note: If repairs are required, contact an authorised
service centre that is guaranteed to use original spare
parts and perform repairs correctly.
Please refer to the enclosed warranty leaflet for more
information on the warranty.
PRODUCT FICHE
WWW
The product che with energy data of this appliance can be downloaded from the website
docs.hotpoint.eu
Page 26
26
Installation guide
90°C
x2
Page 27
EN
27
557 mm
525 mm
549 mm
570 mm
595 mm
447 mm
20 mm
595 mm
5 mm
89° max
97 mm
478 mm
4 mm
min 560 mm
560 mm
600 mm
min 560 mm
560 mm
5 mm
40 mm
40 mm
583+2 mm
Page 28
28
400010864401
Printed in Italy
001
= =
x 2
Loading...