HOTPOINT/ARISTON RSPD 723 DK UA Daily Reference Guide

Quick Guide

1

2

3

A

B

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the
appliance on

www.hotpoint.eu/register

CONTROL PANEL

GB

Prior to using the appliance, carefully read the Safety and installation instructions.

Prior to using the appliance, the bolts used for transport must be removed. For detailed
instructions on the removal procedure, consult the safety and installation instructions.

1. ON/OFF button

2. OPTION button

3. MULTI RINSE button

4. CLEANING ACTION button

5. START/PAUSE button and indicator light

6. KEY LOCK button

7. DELAY button

8. SPIN button

9. TEMPERATURE button

10. AUTO CLEAN button

11. WASH CYCLE SELECTOR KNOB

12. Programme key

WASH CYCLE TABLE

Maximum load 7 kg
Power input in o mode 0.5 W / in left-on mode 8 W

Wash cycle

1 Anti Stain 40°C

2 Anti Stain Quick 40°C

3 Cotton (2) 40°C

4 Synthetics (3) 40°C

5 Fast 30’ 30°C

6 Colour Care (default) => Colours 40°C

7 Ultra delicates 30°C

8 Wool 40°C

9 Eco Cotton

(1) 60°C

10 Cotton 20°C 20°C

11 Whites 60°C

12 Anti-Allergy 60°C

13 Silk & Curtains 30°C

14 Padded Jackets 30°C

Rinse – – 1200 7 ** –

Spin + Pump out * – – 1200 7 ** – – – – – – – –



Required dosage  Optional dosage

Temperature

Default Range

1

12

Max.

spin speed

(rpm)

Max.
load

(kg)

Duration

(minutes)

Pre-

wash

- 40°C 1200 4 **

- 40°C 1200 3,5 ** –

- 60°C 1200 7 220’ –

- 60°C 1000 3,5 95’

- 30°C 800 3 30’ –

- 40°C 1200 4 ** –

- 30°C

--

1 ** –

- 40°C 800 1,5 ** –

60°C 1200 7 210’ –

40°C 1200 7 220’ –

- 20°C 1200 7 ** –

- 90°C 1200 7 **

- 60°C 1200 4 ** –

- 30°C 0 1 ** –

- 30°C 1000 1,5 ** –

2

11

10

Detergents and

Additives

Fabric

Wash

softener

DISPLAY

9

Recommended

detergent

Powder Liquid

3

8

7

1 2 3

  

 

–

–





   

    

 

 

 

 

–

–

–

–









   

   

 

–



    

   

 

 



– – – – – –

–

–





2 4

5

6

Residual

Energy con-

dampness %

– – –

– – –

53 0,80 80

44 0,51 49

71 0,18 45

– – –

– – –

– – –

53 0,99 52,5

53 0,80 80

– – –

– – –

– – –

– – –

Total water l

sumption kWh

The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

2.

7.

8.

For all testing institutes:

2) Long cotton cycle: set programme 3 at temperature 40°C.

3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.

DETERGENT DISPENSER DRAWER

Compartment 1: Pre-wash detergent
(powder)
Compartment 2: Washing detergent (powder

1.

or liquid)

3.

If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, place the partition

4.

into slot B.

5.

Compartment 3: Additives (fabric softeners, etc.)

The fabric softener must not exceed the “MAX” level.
! Use powder detergent for white cotton garments, for pre-washing, and

6.

for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.

! The “Programme key” situated inside the detergent dispenser shows all the
available wash cycles together with a graphic guide on how to use the
individual dispenser compartments.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.

Anti Stain: the programme is suitable to heavily-soiled
garments with resistant colours. It ensures a washing class that is higher
than the standard class (A class). When running the programme, do not
mix garments of dierent colours. We recommend the use of powder
detergent. Pre-treatment with special additives is recommended if there
are obstinate stains.
Anti Stain Quick: this programme is ideal for washing the most dicult
daily stains in 1 hour. It is ideal for mixed fabrics and coloured garments,
caring for your clothes as it washes.
Cotton: suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics: suitable for washing moderately soiled garments made of
synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed
synthetic-cotton bres.
Fast 30’: for washing lightly soiled garments in a short time. Not suitable
for wool, silk and garments to be washed by hand.
Colour Care: setting this cycle and selecting the “Colour Care” function
allows for selecting among 3 dierent wash cycles specially designed to
optimally preserve colour intensity and the brilliance of whites.
Ultra delicates: suitable for washing very delicate garments. It is
advisable to turn the garments inside out before washing them. For best
results, use liquid detergent on delicate garments.

Wool - Woolmark Apparel Care - Green:

The “Wool” wash cycle is approved by the Woolmark Company
for washing wool garments classied as “hand-washable”,
provided that the wash complies with the instructions
appearing on the garment’s label and with those provided by
the manufacturer of this washing machine. (M1253)

Eco Cotton: suitable for washing moderately soiled cotton garments. At
40°C and 60°C it is the standard cycle for washing cotton garments, and is
the most ecient in terms of combined water and electricity consumption.
Cotton 20°C: the programme ideal for lightly soiled cotton loads. The
eective performance levels achieved at cold temperatures, which are
comparable to washing at 40°, are guaranteed by a mechanical action
which operates at varying speed, with repeated and frequent peaks.

Whites: For heavily soiled whites and resistant colours.
Anti-Allergy: for washing home linen in a single cycle. It optimises the

use of fabric softener and allows for saving time and electricity. We
recommend the use of powder detergent.
Silk: use special wash cycle to wash all silk garments. We recommend the use of
special detergent which has been designed to wash delicate clothes.

Curtains: fold curtains and place them in a pillow case or mesh bag.
Padded Jackets: to wash padded jackets, cushions or clothes padded

with goose down (the weight of which should not exceed 1,5 kg).

Rinse: designed for rinsing and spinning.
Spin + Pump out: designed for spinning and draining the water.

DISPLAY

The display is useful when programming the machine and provides a
great deal of information.

C

G

L M

I

F

C

X Z

A

The following will appear in area A: the icon and selected wash cycle, the
washing phases and time remaining to the end of the wash cycle. Area B
will include the two intensity levels relative to the CLEANING ACTION
option. The indicator lights relative to the available functions appear in
area C. Area D will display the time remaining to the start of the selected
cycle if the Delay Timer function was set.
Area E will display the maximum available spin speed on the basis of the
set cycle; if the cycle does not include the spin cycle setting, the dimly lit
“--” symbol will appear in the area.
Area F will show the temperature value that can be selected on the basis
of the set cycle.
If the cycle does not include setting of the temperature, the dimly lit “--”
symbol will appear in the area.
! The rst time the machine is switched on, you will be asked to select the
language and the display will automatically show the language selection menu.

C

H

B

D

Y

E

To select the desired language press buttons X and Y; to conrm the
selection press button Z.
To change the language, switch o the machine and press buttons G, H
and I simultaneously until a buzzer sounds: the language selection menu
will appear again.
! To change the display luminosity, which by default is set to the highest
value, switch the machine o then simultaneously press buttons G, L and
M until the buzzer sounds.
Press buttons X and Y to choose the desired level of luminosity then
conrm by pressing button Z.
! During the wash cycle or when the “Delay” function has been enabled, if
the user does not interact with the display for 1 minute the SCREEN SAVER
activates. To return to the previous window, simply press any button.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the “Auto
Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; “HOTPOINT” will appear on the display; the
indicator light relative to the START/PAUSE button will ash slowly green.

- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.

- Close the door.

- Use the WASH CYCLE selector knob to select the desired wash cycle: the
cycle’s name will appear on the display; the cycle will be associated with a
specic temperature and spin speed which can be modied. The duration
of the cycle will appear on the display.

- Modify the temperature and/or spin speed: the machine automatically
selects the maximum temperature and spin speed set for the selected
wash cycle; these values cannot therefore be increased. Pressing the
button gradually reduces the temperature down to the cold wash setting
(the “--” symbol will appear on the display). Pressing the button
gradually reduces the spin speed until it is completely excluded (the “--”
symbol will appear on the display). Pressing the buttons further restores
the maximum allowed values for the selected cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady green and the door will lock (
symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash amber. To start the wash cycle from the point at
which it was interrupted, press the START/PAUSE button again.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash amber),
then select the desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “CYCLE END” on the display; when the
symbol switches o, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF button, the
washing machine will switch o automatically after about a half of an hour.

OPTIONS

- If the selected function is incompatible with the set wash cycle, the
relevant indicator light will appear dimly lit; the incompatibility will also
be signalled by a buzzer (3 beeps) and the wording “Not Selection” will
appear on the display.

- If the selected function is incompatible with another previously set
function, the wording “Not Selection” will appear on the display and
the function will not be enabled.

Time Saver (Eo )

Selecting this option allows for reducing the wash cycle duration by up to
50% depending on the selected cycle, thus guaranteeing both water and
energy saving. Use this cycle for lightly soiled garments.

Colour Care (  )

Setting cycle 6 and selecting this option allows for choosing among 3
dierent wash cycles specially designed to optimally preserve colour
intensity and the brilliance of whites:
Colours: for washing light coloured garments. This wash cycle is designed
to preserve the brightness of colours over time.