Before using the appliance read
these safety instructions.
Keep them for future reference.
These instructions and the
appliance itself provide
important safety warnings, to be
observed at all times.
The manufacturer declines any
liability for failure to observe
these safety instructions, for
inapropriate use of the
appliance or incorrect setting of
controls.
SAFETY WARNINGS
Very young (0-3 years) and
young children (3-8 years) shall
be kept away from the appliance
unless continuously supervised.
Children from 8 years old and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge can use this
appliance only if they are
supervised or have been given
instructions on safe use and
understand the hazards
involved. Children must not play
with the appliance. Cleaning and
user maintenance must not be
carried out by children without
supervision.
WARNING: The appliance and
its accessible parts become hot
during use, children less than 8
year of age shall be kept away
unless continuously supervised.
WARNING: Avoid touching
heating elements or interior
surface - risk of burns.
Never leave the appliance
unattended during food drying.
If the appliance is suitable for
probe usage, only use the
temperature probe
recommended for this oven.
Do not touch the oven during
pyrolisis cycle. Keep childern
away from the oven during the
pyrolisys cycle (unitl the
complete ventilation of the
room).
Keep clothes or other ammable
materials away from the
appliance, until all the
components have cooled down
completely.
Excess spillage and any object
must be removed from the oven
cavity before cleaning cycle.
Overheated oils and fats catch
re easily. Always be vigilant
when cooking food rich in fat,
oil or when adding alcohol (e.g.
rum, cognac, wine) - risk of re.
Use oven gloves to remove pans
and accessories, taking care not
to touch the heating elements.
At the end of cooking, exercise
caution when opening the door,
by letting the hot air or steam
exit gradually before accessing
the appliance.
Do not obstruct hot air vents at
the front of the oven.
During and after the pyrolysis
cycle, the animals have to be
kept away from the area of the
appliance location.
PERMITTED USE
CAUTION: The appliance is not
intended to be operated by
means of an external timer or
separate remote controlled
system.
This appliance is solely for
domestic, not professional use.
Do not use the appliance
outdoors.
Do not store explosive or
ammable substances such as
aerosol cans and do not place or
use gasoline or other ammable
materials in or near the
appliance: a re may break out if
the appliance is inadvertently
switched on.
No other use is permitted
(e.g.heating rooms).
INSTALLATION
The appliance must be handled
and installed by two or more
persons. Use protective gloves
to unpack and install the
appliance.
Installation and repairs must be
carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part of
the appliance unless specically
stated in the user manual.
Children should not perform
installation operations. Keep
children away during
installation. Keep the packaging
materials (plastic bags,
polystyrene parts, etc.) out of
reach of children, during and
after the installation.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest Aftersales Service.
The appliance must be
disconnected from the power
supply before any installation
operation.
During installation, make sure
the appliance does not damage
the power cable.
Only activate the appliance
when the installation has been
completed.
After installation, the bottom of
the appliance must no longer be
accessible.
Carry out all cabinet cutting
works before tting the
appliance in the furniture and
carefully remove all wood chips
and sawdust.
Do not obstruct the minimum
gap between the worktop and
the upper edge of the oven.
Only remove the oven from its
polystyrene foam base at the
time of installation.
Do not install the appliance
behind a decorative door - Risk
of re.
4
ELECTRICAL WARNINGS
For installation to comply with
current safety regulations, an
omnipolar switch with minimum
contact gap of 3 mm is required
and the appliance must be
earthed.
If the power cable is damaged,
replace with an identical one.
The power cable must only be
replaced by a qualied
technician in compliance with
the manufacturer instruction
and current safety regulations.
Contact an authorized service
center.
It must be possible to
disconnect the appliance from
the power supply by unplugging
it if plug is accessible, or by
means of an accessible multipole switch installed upstream
of the socket in conformity with
national electrical safety
standards.
The rating plate is on the front
edge of the oven (visible when
the door is open).
In case of replacement of power
cable, contact an authorized
service center.
If the tted plug is not suitable
for your socket outlet, contact a
qualied technician.
The power cable must be long
enough to connect the
appliance, once tted in its
housing, to the main power
supply. Do not pull the power
supply cable.
Do not use extension leads,
multiple sockets or adapters.
Do not operate this appliance if
it has a damaged mains cord or
plug, if it is not working
properly, or if it has been
damaged or dropped. Keep the
cord away from hot surfaces.
The electrical components must
not be accessible to the user
after installation.
Do not touch the appliance with
any wet part of the body and do
not operate it when barefoot.
EN
CLEANING AND
MAINTENANCE
Never use steam cleaning
equipment.
WARNING: Ensure that the
appliance is switched o before
replacing the lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the appliance door glass
since they can scratch the
surface, which may result in
shattering of the glass.
Remove all accessories before
running the pyrolytic function
(also the lateral grids).
Wear protective gloves for
cleaning and maintenance.
The appliance must be
disconnected from the power
supply before any maintenance
operation.
Ensure the appliance is cooled
down before carrying out any
cleaning or maintenance
operation.
If the oven is installed below a
hob, make sure that all burners
or electric hotplates are
switched o during the
selfcleaning (pyrolytic) function.
5
SAFEGUARDING THE ENVIRONMENT
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with the
recycle symbol
of the packaging must therefore be
disposed of responsibility and in full
compliance with local authority
regulations governing waste disposal.
. The various parts
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance, make
it unusable by cutting o the power
cable and removing the doors and
shelves (if present) so that children
cannot easily climb inside and
become trapped.
This appliance is manufactured with
recyclable
Dispose of it in accordance with local
waste disposal regulations.
or reusable materials.
For further information on the
treatment, recovery and recycling of
household electrical appliances,
contact your competent local
authority, the collection service for
household waste or the store where
you purchase the appliance.
This appliance is marked in
compliance with European Directive
2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE).
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
The symbol
the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
to an appropriate collection center for
the recycling of electrical and
electronic equipment.
on the product or on
ENERGY SAVING TIPS
Only preheat the oven if specied in
the cooking table or your recipe.
Use dark lacquered or enamelled
baking moduls as they absorb heat far
better.
1. Energy-saving cycle (PYRO
EXPRESS/ECO): which consumes
approximately 25% less energy than
the standard cycle. Select it at regular
intervals (after cooking meat on 2 or 3
consecutive occasions).
2. Standard cycle (PYRO): which is
suitable for cleaning a very dirty oven.
DECLARATION OF CONFORMITY
This appliance has been designed,
constructed and distributed in
compliance with the requirements of
European Directives:
LVD 2014/35/EU, EMC 2014/30/EU and
Ro HS 2 011/65/ EU.
This appliance, which is intended to
come into contact with foodstus,
complies with European Regulation
n.1935/2004.
This appliance meets the Eco Design
requirements of European Regulations
n.65/2014, and n.66/2014 in
conformity to the European standard
EN60350-1.
6
Use and Care guide
PRODUCT
DESCRIPTION
1
2
3
4
5
5
4
3
2
1
EN
1. Control panel
2. Fan
3. Circular heating element
6
5
4
3
2
1
7
8
9
10
(not visible)
4. Shelf guides
(the level is indicated on the front
of the oven)
5. Door
6. Upper heating element / grill
7. Lamp
8. Meat probe connection
9. Identification plate
(do not remove)
10. Lower heating element
(not visible)
Please note:
The cooling fan may switch itself on every so often during cooking in order to reduce energy consumption.
Once cooking is complete and the oven has been switched o, the cooling fan may continue to run for a certain period of
time.
When the oven door is opened during cooking, the heating elements switch o.
7
CONTROL PANEL
1. ON/OFF
For switching the oven on and
off and for stopping an active
function.
2. AUTOMATIC FUNCTIONS
For scrolling through the list of
automatic functions.
3. BACK
For returning to the previous
settings menu.
1432576
4. MANUAL FUNCTIONS
For scrolling through the list of
manual functions.
5. DISPL AY
6. NAVIGATION BUTTONS
For changing the settings and
values of a function.
8
7. CONFIRMATION BUTTON
For confirming a selected function
or a set value.
8. START
For starting a function using the
specified or basic settings.
Use to cook food or as a
support for pans, cake tins
and other oven proof items
of cookware.
ROASTING SPIT
For roasting large pieces of
meat and poultry uniformly,
in conjunction with the
Turbogrill function.
The number of accessories may vary depending on which model is purchased.
Other accessories that are not supplied can be purchased separately from the After-sales Service.
Use as an oven tray
for cooking meat, sh,
vegetables, atbread, etc.
or position underneath the
wire shelf to collect cooking
juices.
Use for cooking all bread
and pastry products, but
also for meat, sh en
papillotte, etc.
These make it easier to place
accessories in and remove
accessories from the oven.
INSERTING THE WIRE SHELF AND OTHER ACCESSORIES
1. Insert the wire shelf horizontally by sliding it
across the shelf guides, making sure that the side with
the raised edge is facing upwards.
2. Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
9
2
1
REMOVING AND REFITTING THE SHELF GUIDES
1. To remove the shelf guides, lift the guides up (1)
and then gently pull the lower part out of its seating
(2): the shelf guides can now be removed.
1. To refit the shelf guides, first fit them back into
their upper seating.
2. Keeping them held up, slide them into the cooking
compartment.
3. Lower them into position in the lower seating.
10
FITTING THE SLIDING RUNNERS
EN
1. Remove the shelf guides.
2. Take the protective plastic off the sliding runners.
3. Fasten the upper clip of the runner to the shelf
guide and slide it along as far as it will go (fig. A);
lower the other clip into position.
5. Repeat these steps on the other shelf guide on the
same level. The sliding runners can be fitted on any
level.
6. Reposition the shelf guides.
4. To secure the guide, press the lower portion of the
clip firmly against the shelf guide. Make sure that the
runners can move freely.
7. Rest the accessories on the sliding runners.
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.