HOTPOINT/ARISTON EU AQ49D410 N Daily Reference Guide

1

2

180

210

150
120

90
60

B

A

C

Quick Guide

GREEN

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the
appliance on www.hotpoint.eu/register

TOUCH CONTROL PANEL

1. ON/OFF button with indicator light

2. WASH CYCLE SELECTOR knob

3. Buttons M1-M2-M3

4. TEMPERATURE button

5. SPIN button

6. GREEN indicator light

7. START/PAUSE button with indicator light

8. WASH CYCLE PHASE icons

9. CONTROL PANEL LOCK indicator light

10. LOCK indicator light

11. DELAYED START button

12. OPTION buttons

1

WASH CYCLE TABLE

Prior to using the appliance, carefully read the Safety and installation instructions.

Prior to using the appliance, the bolts used for transport must be removed. For detailed
instructions on the removal procedure, consult the safety and installation instructions.

2

3

4 5

6 7 8

DISPLAY

12

11

GB

910

Max load 10 Kg
Power consumption in o -mode 0.5 W / in left-on mode 8 W

Programme

Temperatures

Setting Range 1 2

Max. spin

speed (rpm

Max
load

Spin + Pump out * – – 1400 10.0 ** – – – – – – – –

1351 10.0 3:59 –

Eco 40-60 (1) 40 °C 40°C

1351 5.0 2:55 –
1351 2.5 2:10 –

20°C 20 °C

Synthetics Resistant (3) 40°C

Cotton (2)

Multi Colour 20°C

Darks 30°C

Bed&Bath 60°C

Whites
Duvets 30°C

Ultradelicates 30°C

Mix 30’ 30°C

Steam Refresh – – – 2.0 ** – – – – – – – – –

Anti Allergy Delicate 40°C

Wool 40°C

40°C

60°C

- 20 °C

- 60°C

- 60°C

- 20°C

- 30°C

- 60°C

- 90°C

- 30°C

- 30°C

- 30°C

- 40°C

- 40°C

1400 10.0 1:50 –
1200 5.5 2:55
1400 10.0 3:55 –

1400 10.0 ** –

800 6.0 ** –
1400 10.0 **
1400 10.0 2:40
1200 3.5 ** –

0 1.0 ** –

800 5.5 0:30 –

1400 5.5 ** –

800 2.5 ** –

Rinse – – 1400 10.0 ** – –

 Dosing required  Dosing optional

Eco Cotton (4)

This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options.
programme are indicative only.

Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of
the wash cycle on the basis of the load inside it; this value will then be shown on the display.

1) - Te st wash cycle in com pliance with EU Ecodesign re gulation 2019/2014. The most
ecient programme in terms of energy and water consumption for washing normally soiled
cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated in
the table.

For all testing institutes:

2) Long cotton cycle: set cycle at a temperature of 40°C.

3) Long synthetics cycle: set cycle at a temperature of 40°C.

The values given for programmes other than the Eco 40-60

60 °C 60 °C 1400 10.0 3:45 –
40 °C 40 °C 1400 10.0 3:55 –

* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** The duration of the wash cycles can be checked on the display.
*** After programme end and spinning with maximum selectable spin speed, in default

programme setting.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer (The detergent

dispens er drawer is locate d inside the machine a nd can be

accessed b y opening the doo r)

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

2.

4.

7.

8.

(kg

Recommended

detergent

Powder Liquid

Residual

Duration

(h : m)

Detergents and additives

Prewash Wash

Fabric

softener

dampness % (***)

   
   
   
 

–

    

   
 
 

–
–

    
    

 
 
 

 
 



–
–
–

–
–

– – – – – –

   

   

4) Eco Cotton - Test wash cycles in compliance with regulations 1061/2010. Set “ ” wash
cycle at a temperature of 40°C or 60°C to access this cycles.

53 0.83 58 34
53 0.60 60 35
53 0.43 41 32

54.5 0.20 95 22



35 0.83 80
49 1.14 107 45

– – – –



– – – –



– – – –

54 1.90 100 55

– – – –



– – – –



71 0.21 50



– – – –



– – – –



53 0.70 58 ­49 1.14 107 -

DETERGENT DISPENSER DRAWER

Compartment 1: Pre-wash detergent
(powder)

Compartment 2: Washing detergent (powder
or liquid)

If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage. If powder detergent is used, place the
partition into slot B.

Compartment : Additives (fabric softeners,
etc.)

We recommend that the maximum level indicated by
the grille is not exceeded, and that concentrated fabric softeners are diluted.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.

1.

! Follow the instructions given on the detergent packaging.

3.

! To remove the drawer, press lever C and pull the drawer outwards.

5.

TOUCH CONTROL PANEL

To adjust the settings, gently press the icon inside
the sensitive (touch control) area as illustrated in the
gure.

6.

Energy

Laundry

Total water lt

consumption kWh

temperature °C

43

27

CHANGE LANGUAGES

The rst time the machine is switched on, the rst language will ash on
the display. The “ “, “ OK” and “V” symbols will appear on the display, in
line with the 3 buttons on the right-hand side. The languages change
automatically every 3”; alternatively, they can be changed by pressing the
buttons next to the “ “ and “V” symbols. Use the “OK” button to conrm
the language, which will be set after 2”. If no buttons are pressed, the
automatic language change will begin again after 30”.
To change the language, switch the machine on and o again; in the 30”
time period after it has been switched o, press and hold the temperature

+spin +delayed start buttons simultaneously for 5’’. A short
sound alert will be emitted and the set language will ash on the display.
Press the buttons next to the “ “ and “V” symbols to change the language.
Use the button next to the “OK” symbol to conrm the language, which
will be set after 2”. If no buttons are pressed, the language set previously
will be displayed after 30”. Switch on the machine.

WASH CYCLE PHASE ICONS

These illuminate to indicate the progress of the wash cycle (Wash –
Rinse – Spin – Drain ). The text lights up when the cycle is
complete.

GREEN INDICATOR LIGHT

The icon lights up when, after altering the washing parameters, an
energy saving of at least 10% is made. Furthermore, before the machine
enters “Standby” mode, the icon will light up for a few seconds; when the
machine is switched o the estimated energy saving will be around the
80% mark.

BUTTONS M1M2M3

press and hold one of the buttons to store a cycle with your own set
preferences in the memory of the machine. To recall a previously-stored
cycle, press the corresponding button.

CONTROL PANEL LOCK

To activate or deactivate the control panel lock, press and hold the
button for approximately 2 seconds. when the indicator light is
illuminated, the control panel is locked (apart from the ON/OFF button).
This means it is possible to prevent wash cycles from being modied
accidentally, especially where there are children in the home.

LOCK INDICATOR LIGHT

When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button; if the symbol is o, the door can be opened.

WHASH CYCLES

Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.

Spin + Pump out: designed to spin and drain the water.

: For washing normally soiled cotton garments declared to be

washable at 40 °C or 60 °C, together in the same cycle. This is the standard
cotton programme and the most ecient in terms of water and energy
consumption.

: For washing lightly soiled cotton garments, at a temperature of 20 °C.

Synthetics Resistant: Suitable for washing moderately soiled garments

made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed
synthetic-cotton bres.

Cotton: Normally to heavily soiled and robust cottons .

Multi Colour: use the cycle to wash medium-soiled multi-coloured

garments or garments of dierent colours. Cycle designed to ensure
colour care while achieving a 40° performance at just 20°. We
recommend using detergents that are suitable for coloured washes and
active already at low temperatures.
! We always recommend a separate wash for running garments and the
rst time you wash a new coloured item.
Darks: use cycle to wash dark-coloured garments. This programme is
designed to maintain dark colours over time. We recommend using a liquid
detergent for the best results when washing dark-coloured garments.

Bed&Bath: use programme to wash bed linen and towels in one
single cycle: it optimises softener performance and helps you save time
and energy. We recommend the use of powder detergent.

Whites: for extremely soiled whites.
Duvets: to wash double or single duvets (the weight of which should not

exceed 3,5 kg), cushions or clothes padded with goose down such as
pua jackets, use the special wash cycle. We recommend that duvets
are placed in the drum with their edges folded inwards and that no more
than ¾ of the total volume of the drum is used. To achieve the best
results, we recommend that a liquid detergent is used and placed inside
the detergent dispenser drawer.

Ultradelicates: use programme to wash very delicate garments
having strasses or sequins.
We recommend turning the garments inside out before washing and
placing small items into the special bag for washing delicates. Use liquid
detergent on delicate garments for best results.

To wash Silk garments and Curtains (these should be folded and placed
inside the bag provided), select cycle and then option ; the
machine will end the cycle while the laundry is soaking and the
indicator light will ash. To drain the water so that the laundry may be
removed, press the START/PAUSE button or the button.

Mix 30’: for washing lightly soiled garments in a short time. Not suitable
for wool, silk and garments to be washed by hand.

Steam Refresh: This programme refreshes garments by removing bad

odours and relaxing the bres (2 kg, roughly 3 items). Insert dry items only
(that are not dirty) and select programme . The garments will be damp
once the cycle is completed, so we recommend hanging them to dry. The

programme makes ironing easier.
Moreover, with the “Steam Perfume” laundry balls, your favourite perfume
can be added to your laundry. Place a few drops of perfume on the sponge
contained inside the laundry ball, close it and insert it into the drum
together with the laundry. Then launch the specic programme . At the
end of the cycle, garments will be relaxed and fragrant.

! The indicator light for the option will switch on when this cycle is selected.
! Not recommended for wool or silk garments.
! Do not add too much per fume to the sponge in order to avoid it dripping.
! Do not add softeners or detergents.

Anti Allergy Delicate: cycle studied for cotton laundry and other
resistant fabrics to guarantee the removal of pollen and cat and dog hair
already at 40°.

Wool - Woolmark Apparel Care - Green:

the wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash” provided that the
garments are washed according to the instructions issued
by the manufacturer of this washing machine. Follow the
garment care label for drying and other laundry
instructions. (M1135)

Rinse designed for rinsing and spinning.

Eco Cotton: For washing normally soiled cotton garments. At 40°C and 60°C.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.

- Press the button. All the indicator lights will illuminate for 1 second
and the text AQUALTIS will appear on the display; the indicator light
corresponding to the button will then remain lit in a constant manner
and the START/PAUSE indicator light will ash.

- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.

- Close the door.

- Turn the PROGRAMME KNOB left or right, until the required programme
has been selected; the name of the programme will appear on the
display. A temperature and spin speed is set for each programme; these
may be adjusted. The cycle duration will also appear on the display.

- Modify the temperature and/or spin speed: the machine automatically
displays the maximum temperature and spin speed values set for the
selected cycle, or the most recently-used settings if they are compatible
with the selected cycle. The temperature can be decreased by pressing
the button, until the cold wash “OFF” setting is reached. The spin
speed may be progressively reduced by pressing the button, until it is
completely excluded “OFF”. If these buttons are pressed again, the
maximum values are restored.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady green and the door will lock (
symbol on).

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing
machine using the START/PAUSE button (the relative indicator light
will ash amber), then select the desired cycle and press the START/
PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.

POSSIBILITY OF ADDING GARMENTS

An icon on the display will signal when additional garments can be
introduced into the washing machine, without decreasing the washing
performance.
To add garments, rst stop the washing machine by pressing the START/
PAUSE button then open the door and insert them.
Press the START/PAUSE button again to restart the wash cycle from
the point at which it was interrupted.

AT THE END OF THE WASH CYCLE

This is indicated by the illuminated text END. The porthole door may be
opened immediately. If the START/PAUSE indicator light is ashing,
press the button to end the cycle. Open the door, unload the laundry and