HOTPOINT/ARISTON BI WDHL 75148 EU Daily Reference Guide
Quick Guide
1
2
3
Maximum load 7 kg
Detergents and
Recommended
THANK YOU FOR BUYING A HOTPOINT PRODUCT
In order to receive a more complete assistance,
please register your product on
www.hotpoint.eu/register
CONTROL PANEL
1. ON/OFF button
2. START/PAUSE button with indicator light
3. WASH CYCLE PROGRESS indicator lights
4. DOOR LOCKED indicator light
5. STAIN REMOVAL button with indic ator lights
6. FUNCTION buttons with indicator lights
7. DRYING ONLY button with indicator
light
8. DRYING LEVELS button
9. TIME DRYING button
10. TEMPERATURE button
11. WASH CYCLE knob
WASH CYCLE TABLE
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.
1
2
11
3
1049
8
GB
5
7
6
Power input in o mode 0.5 W / in left-on mode 8 W
Wash cycle
1 Daily Mix Wash & Dry 40 °C
2 Shirts & T-Shirts 40 °C
Temperature
Default Range
- 40 °C 800 3,5 3,5 265
- 40 °C 1000 2,0 2,0 180
Maximum
spin
(r.p.m.)
Max. load for
wash cycle (kg)
Max. load for
drying cycle
(kg)
Duration
(Minutes)
Drying
Additives
Wash
2 3
Fabric
softener
Powder Liquid
3 Pre Iron – – – 1,5 – 20 – – – – –
4 Steam Refresh – – – 1,5 – 20 – – – – –
5 Cotton (2) 40 °C
6 Synthetics (3) 40 °C
7 Anti Stain Quick 40 °C
8 Anti Stain 100 40 °C
9 White 60 °C
10
Eco Cotton
(1)
11 Coloureds 40 °C
12 Ultradelicates 30 °C
13 Wool 40 °C
14 Fast 30' ** 30 °C
Rinse+Spin – – 1400 7,0 5,0 50
Spin & Drain * – – 1400 7,0 5,0 10
Required dosage Optional dosage
60 °C
- 60 °C 1400 7,0 5,0 230
- 60 °C 1200 4,0 3,5 195
- 40 °C 1200 3,5 3,0 45
- 40 °C 1400 7,0 5,0 205
- 90 °C 1400 7,0 5,0 140
60° C 1400 7,0 5,0 175
40°C 1400 7,0 5,0 230
- 40 °C 1400 7,0 5,0 100
- 30 °C - 1,0 1,0 80
- 40 °C 800 1,5 1,5 75
- 30 °C 800 3,0 - 30
–
– – – –
detergent
–
–
–
–
–
–
–
–
– –
–
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test programme in compliance with standard EN 50229 (Wash):
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
Test programme in compliance with standard EN 50229 (Drying): select the 10 wash
programme and set the drying level to “ ”, for both loads. The rst drying cycle must be
carried out with the nominal load.
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
2.
7.
For all testing institutes:
2) Long cotton cycle: set cycle 5 at a temperature of 40°C.
3) Long synthetics cycle: set cycle 6 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** If a drying cycle is also programmed, the machine will run a “wash+dry” programme lasting
45’ and a 1kg laundry load.
DETERGENT DISPENSER
Compartment 1:
1.
Do not insert detergent in this compartment.
3.
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners,
etc.)
4.
The fabric softener must not exceed the “MAX”
level.
5.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
6.
temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
WASH CYCLES
40°
60°
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Daily Mix Wash & Dry
use programme 1 to wash and dry mixed garments (cotton and
synthetics). This cycle may be used to wash and dry loads of up to 3,5 kg;
we recommend the use of liquid detergent.
The use of the steam in this programme is optimised to reduce the
formation of creases on garments, making them easier to iron.
Shirts & T-Shirts
Use programme 2 to wash and dry shirts and T-shirts in dierent fabrics
and colours to ensure maximum care. This cycle may be used to wash and
dry loads of up to 2 kg. To achieve optimum results, use liquid detergent
and pre-treat cus, collars and stains. The use of the steam in this
programme is optimised to reduce the formation of creases on garments,
making them easier to iron.
Pre Iron
Use this programme immediately before ironing; max. 1,5 kg load. The
use of the steam in this programme is optimised to reduce the formation
of creases on garments, making them easier to iron.
Steam Refresh
For refreshing garments, neutralised unpleasant odours and relaxing the
bres by delivering steam into the drum. The garments will be damp at
the end of the cycle.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Anti Stain Quick
This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics
and coloured garments.
If the drying option is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight
exposure and preventing loss of whiteness caused by the possible
presence of dust in the air. Dryness level “ ” recommended.
Anti Stain 100
This cycle is suitable to heavily-soiled garments with resistant colours. It
ensures a washing class that is higher than the standard class (A class).
When running the programme, do not mix garments of dierent colours.
We recommend the use of powder detergent. Pre-treatment with special
additives is recommended if there are obstinate stains.
If the drying option is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight
exposure and preventing loss of whiteness caused by the possible
presence of dust in the air. Dryness level “ ” recommended.
White
For heavily soiled whites and resistant colours.
Eco Cotton
Suitable for washing moderately soiled cotton garments. At 40°C and
60°C it is the standard cycle for washing cotton garments, and is the most
ecient in terms of combined water and electricity consumption.
Coloureds
For washing coloured cotton garments. This programme is optimised to
keep colours bright even after repeated washing.
Ultradelicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
When selecting an exclusively time-based drying function, a drying cycle
is performed at the end of the wash cycle that is particularly delicate,
thanks to light handling and appropriate temperature control of the
water jet.
The recommended durations are:
1 kg of synthetic garments --> 150 min
1 kg of synthetic and cotton garments --> 180 min
1 kg of cotton garments --> 180 min
The degree of dryness depends on the load and fabric composition.
Wool - Woolmark Apparel Care - Green:
The Wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash” provided that the
products are washed according to the instructions on the
garment label and those issued by the manufacturer of
this washer-dryer (M1126). The Woolmark logo is a
Certication mark in many countries.
Fast 30’
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Rinse+Spin
Designed for rinsing and spinning.
Spin & Pump out
Designed for spinning and draining the water.
WASH CYCLE PHASE INDICATOR LIGHTS
Once the desired wash cycle has been selected and has begun, the
indicator lights switch on one-by-one to indicate which phase of the cycle
is currently in progress.
Wash
Rinse
Spin/Drain
Drying
End of Wash Cycle
DOOR LOCKED INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button; if the indicator light is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
“Auto-Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Turn the washing machine on by pressing the ON/OFF button. All the
indicator lights will light up for a few seconds, then only the lights
corresponding to the settings for the selected wash cycle will remain lit;
the START/PAUSE indicator light will also ash.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- Set the WASH CYCLE knob to the desired cycle.
- Modify the temperature: pressing the
reducing the temperature down to the cold wash level (20°C).
- Select the desired wash cycle.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady green and the door will lock ( indicator
light on).
button allows for gradually
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash. If the indicator light is not lit, the door may be
opened. To start the wash cycle from the point at which it was
interrupted, press the START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the indicator light turns on to signal that the door
cannot be opened. While a wash cycle is running, the door remains
locked. To open the door while a cycle is under way, for example, to add
or remove garments, press the START/PAUSE button to pause the
cycle; the indicator light will ash. If the indicator light is not lit, the
door may be opened. Press the START/PAUSE button again to
continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash),
then select the desired cycle and press the START/PAUSE button
again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button.
The cycle will be stopped and the machine will switch o.
END OF THE CYCLE
Once the cycle terminates the indicator light will light up; when the
indicator light switches o, the door may be opened. Open the door,
unload the laundry and switch o the machine. If you do not press “ON/
OFF” button, the washing machine will switch o automatically after
about a half of an hour. Close the water tap, open the door and unload
the washing machine. Leave the door ajar to allow the drum to dry.
Loading...