HOTPOINT WMTF 722U UK N Daily Reference Guide
Quick guide
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.hotpoint.eu/register
CONTROL PANEL
1 Programme selector
2 “Start/Pause” button
3 “Reset/Drain” button
4 “Start delay” button
5 “Spin speed” button
6 Time indication
7 Washing phase
PROGRAMME CHART
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bracket is removed.
For more detailed instructions on how to remove it, see the Installation Guide.
INDICATORS
7 6
Door locked
Failure: Call Service
Failure: Water lter clogged
Failure: No water
In the event of any failure, refer to the
“TROUBLESHOOTING” section
1 2 43 5
EN
Power consumption in o-mode 0,11 W / in left-on mode 0,11 W
Max load 7,0 Kg
Programme
Temperatures
Setting Range
Max, spin
speed
(rpm)
Max
load
(kg)
Duration
(h : m)
Prewash
Cotton 60°C 40 - 90°C 1200 7,0 3:00
Synthetics 40°C 40 - 60°C 1200 3,0 1:50
Anti stain 20°C 20°C 1200 4,0 ** –
Mini 30°C 30°C 1200 1,0 ** –
Delicates 30°C 30°C 1000 1,5 **
Wool 40°C 40°C 1000 1,0 ** –
Baby 60°C 60°C 1000 4,0 **
Mix 15’ 30°C 30°C 1200 3,0 0:15 –
Mix 30’ 30°C 30°C 1200 3,0 ** –
Mix 60’ 40°C 40°C 1200 3,0 ** –
Jeans 40°C 40°C 1000 4,0 **
1151 7,0 3:25 –
Eco 40–60 40°C 40°C
1151 3,5 2:40 –
1151 2,0 1:50 –
20°C 20°C 20°C 1200 7,0 2:45 –
Rinse & Spin – – 1200 7,0 ** – –
Spin – – 1200 7,0 ** – – – – – – – – –
Drain – – – – – – – – – – – – – –
7,0 4:00 –
3,5 2:50 –
Eco Cotton 60°C
60°C 1200
40°C 1200 3,5 2:30 –
Dosing required Dosing optional
Eco cotton - Test wash cycles in compliance with regulations 1061/2010. Set “Cotton 40 °C” or
“Cotton 60°C” wash cycle together with “Energy saver” option to access this cycles.
Eco 40-60 - Test wash cycle in compliance with 2019/2014 regulation. The most ecient
programme in terms of energy and water consumption for washing normally soiled cotton
laundry. Display only: Spin speed values shown on the display can slightly diers from the
values stated in the table
For all Test Institutes
Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.
Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.
Detergents and additives
Main
wash
Softener
This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options. The values given for programmes other than the eco 4060 programme are indicative only.
* After programme end and spinning with maximum selectable spin speed, in default
programme setting.
** The duration of the programme is shown on the display.
The sensor technology adapts water, energy and programme duration to your wash load.
Recommended
Powder Liquid
detergent
Residual
dampness % *
Total water lt
consumption
kWh
Energy
64 1,33 52 55
40 0,56 50 40
– – – –
–
–
–
–
– – – –
– – – –
– – – –
– – – –
57 0,15 30 21
– – – –
– – – –
–
– – – –
62 1,23 57 45
62 0,57 41 36
62 0,35 32 31
–
62 0,27 48 20
– – – – – –
62 0,90 48 –
62 0,75 34 –
62 0,65 34 –
Laundry
temperature °C
PRODUCT DESCRIPTION
1. Lid handle
2. Lid
3. Control panel
4. Detergent dispenser
5. Drum
6. Water lter - behind the cover
7. Mobility lever (depending on model)
8. Adjustable feet (x2)
DETERGENT DISPENSER
1.
Main wash compartment
Detergent for the main wash, stain remover or
3.
2.
water softener.
4.
Prewash compartment
Detergent for the prewash.
5.
Softener compartment
Fabric softener. Liquid starch. Bleach.
Pour in softener, starch or bleach solution
only up to the “max” mark.
Release button
Press to remove tray for cleaning.
6.
7.
8.
PROGRAMMES
For choosing the appropriate programme for your kind of
laundry, always respect the instructions on the care labels
of the laundry. The value given in the tub symbol is the
maximum temperature possible for washing the garment.
Cotton
Normally to heavily soiled and robust cottons .
Synthetics
For washing soiled garments made from synthetic fibres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
Antistain
This programme ensures maximum stain removal capacity with no need
for pre-treatment at low temperatures, preserving fabrics and colours.
Mini
Cotton and/or synthetic laundry made of stable fabric types. Ideal
programme to wash a small load of laundry in an economic way. Pretreatment of stains recommended. Not appropriate for very delicate
laundry.
Delicates
For washing particularly delicate garments. Preferably turn garments
inside out before washing.
Wool
All wool garments can be washed using programme ‚ “Wool“ even
those carryng the “hand-wash only“ label. For best results, use special
detergents and do not exceed max kg declaration of laundry.
Baby
Normally soiled baby clothes made of cotton and/or linen. The suds are
rinsed out even more thoroughly, which helps to protect sensitive baby skin.
Mix 15’
Refresh programme. Briefly worn clothing made of cotton, artificial fibers
and blends with cotton. Use lowest recommended detergent amount.
Mix 30’
For washing lightly soiled garments quickly. This cycle lasts only 30
minutes, saving time and energy.
Mix 60’
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic fibres and mixed fibres.
Jeans
Turn garments inside-out before washing and use a liquid detergent.
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Rinse & Spin
Separate rinse and intensive spin programme. For robust laundry.
Spin
Spins the load then empties the water. For robust laundry.
Drain
Drain only - no spinning.
Eco cotton
For washing normally soiled cotton garments. At 40°C and 60°C.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton” programme at a
temperature of 95°C. Pour a small quantity of detergent powder into the
main wash compartment of the detergent dispenser (maximum 1/3 of
the quantity the detergent manufacturer recommends for lightly soiled
laundry). Start the programme without adding any laundry.
PAUSE OR CHANGE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause” button, the indicator
light blinks. Select any new programme, options or spin speed if you wish
to change those settings. Press the “Start/Pause” button again to start
the wash cycle from the point at which it was interrupted. Do not add
detergent for this programme.
DOOR LOCKED
After start of a program the lamp lights up to indicate that the lid
can not be opened. As long as a wash programme is running, the lid
remains locked and must on no account be forced open. In case you
have an urgent need to open it during a running programme, for
example to add more laundry, or to remove laundry which was loaded
by mistake, press the “Start/Pause” button. If the temperature is not too
high, the “Door locked” indicator light turns off. It may last a while
until you can open the lid. Press “Start/Pause” to proceed with the
programme again.
PROGRAMME END
The “Door locked” indication light goes off and the display shows
. Turn the programme selector to the “OFF” position and close
the water tap. Open the lid and drum and unload the machine. Leave
the lid open for some time to allow the interior of the machine to dry.
After about a quarter of an hour, the washing machine will switch off
completely to save energy.
To cancel a running programme before the end of cycle, press the
“Reset/Drain” button for at least 3 seconds. The water is drained out. It
may last a while until you can open the lid.
OPTIONS
! When the combination of programme and additional option(s) is not
possible, the indication lights switch o automatically.
! Unsuitable combinations of options are deselected automatically.
Energy saver
With a lower temperature and slightly modified washing duration, the
optimum combination of excellent washing results
and even lower energy consumption is achieved.
Rapid
Enables quicker washing by shortening the programme duration.
Recommendable for small loads or only lightly soiled laundry.
Start delay
To set the selected programme to start at a later time, press the “Start
delay” button to set the desired delay time. The lamp for the
“Start delay” option button lights up, and it goes off when the
programme starts. Once having pressed the “Start/Pause” button, the
countdown of the time delay begins. Number of hours preselected can
be reduced by pressing the “Start delay” button again. Do not use liquid
detergent when activating this option. To cancel the “Start delay” turn
the programme selector to another position.
Prewash
Only for heavily soiled loads (for example sand, granular dirt). Increases
the cycle time by approximately 15 min. Do not use liquid detergent for
the main wash when activating the Prewash option.
Intensive rinse
Helps to avoid detergent residues in the laundry by extending the rinse
phase. Particularly suitable for washing baby laundry, for people suffering
from allergies and for areas with soft water.
Spin speed
Every programme has a predefined spin speed. Press the button to set
another spin speed. The indicator of the predefined spin speed lights up.
If you select spin speed “0” , the final spinning is cancelled and the water
is drained out only. However, intermediate spin phases remain during the
rinse.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS” section. Load the laundry, close the drum door and check that
it is closed properly. Pour in the detergent and any additives. Observe the
dosing recommendations on the detergent pack. Close the lid. Turn the
programme selector to the desired programme and select any option
if needed. The display shows the duration of the selected programme
(in hours and minutes), and the indicator for the “Start/Pause” button
flashes. The indicator for the preset spin speed lights up. The speed can
be changed by pressing the “Spin” button. Open the tap and press the
“Start/Pause” button to start the wash cycle. The “Start/Pause” indicator
will lights up and the door will be locked. Due to variations in load and
temperature of inlet water, the remaining time is newly calculated in
certain programme phases. If this is the case, an animation appears
on the time display.
Loading...