Hotpoint TZUL163XFH, TZUL183XFH QUICK START GUIDE
QUICK START GUIDE
EN
Read the Instructions for Use carefully before
using the appliance.
1
2
3
4
11
5
6
7
8
12
9
10
13
1. External Indicators of Power On and alarms
2. Control panel
3. LED’s lighting
4. Ice packs*
5. Ice Mate* or Ice tray*
6. Drawer divider*
7. Bottle rack*
8. Glass shelves
9. Rating plate with commercial name
10. Door reversibility kit
11. Area for freezing fresh food or to store
frozen food
12. Area for storing frozen foods
13. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance,
wait at least 4-6 hours before placing food into the
appliance. When the appliance is connected to the
power supply, the display lights up and all the icons
appear on the display for approximately 1 second.
The default (factory) values of the freezer
compartment settings light-up.
POWER ON (EXTERNAL LED) indicator
An external green LED showing that the appliance is
switched ON. It automatically turns off when opening
the door.
ON/STANDBY indicator
TEMPERATURE DISPLAY
SUPER FREEZE indicator
ON/STANDBY button
To put the product in Stand-by, press and hold for
3 seconds. All the icons turn off except On/Standby
indicator
. To reactivate the appliance press once
(briefly) this button.
ICE PARTY indicator
ICE PARTY button
Press to activate/deactivate the Ice Party function.
Use this function to chill drinks inside the freezer
compartment.
Important: do not leave the bottle inside the freezer
compartment longer than the function is active
(30 minutes).
TEMPERATURE/SUPER FREEZE button
Temperature Setting
The appliance is normally factory-set for operation at the recommended temperature of -18°C.
The internal temperature can be adjusted between -16°C and - 24°C, proceeding as follows:
• Press the temperature setting button (°C). The storage temperature can be changed by -1°C
with each pressure of the button: the value changes cyclically between -16°C and -24°C.
Super Freeze
• Press for 3 seconds to activate the Super Freeze function (see the Instructions for Use)
The function switches off automatically after about 50 hours.
ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm
The acoustical alarm is activated and the Alarm Indicator
blinks.
The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.
ALARM (EXTERNAL LED)
This red LED can blink to show the occurrence of
an alarm or a failure even when the door is closed.
Please open the door and check on the internal
Control Panel which alarm/failure is occurring.
ECO FUNCTION indicator
BLACK OUT ALARM
Long Black-out Alarm indicator.
(see the Instructions for Use)
ECO FUNCTION (NIGHT TIME RATE) button
Press to activate/deactivate the Eco Function
function. The Eco Function enables appliance energy
consumption to be concentrated in the reduced rate
hours, generally at night (see the Instructions for Use).
ALARM indicator (see the below Alarms Table)
STOP ALARM button
Press in case of alarm.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use
Is recommended to reverse door swing by two persons.
Specifications, technical data and images may
vary from model to model
Temperature alarm
Ice Party alarm
Long black-out alarm
Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.
The Temperature display blinks (°C) and the Alarm Indicator
The Ice Party Indicator
The Black Out Alarm icon
display (°C) blinks, showing the maximum temperature reached during blackout.
blinks and the acoustical alarm is activated.
remains on, the Alarm indicator blinks and the Temperature
remains on.
The inside temperature is not adequate.
30 min. elapsed since Ice Party function has been activated. It is time to take out
the bottle from the freezer (see Instructions for Use for more details).
Prolonged power failure, able to cause the inside temperature to increase to 0°C.
Press the Stop Alarm button
(°C) blinks and the Alarm Indicator
Press the Ice Party button or alternatively Stop Alarm button to deactivate the Ice Party
alarm - and remove the bottle from the freezer.
Press the Stop Alarm button
(°C) blinks and the Alarm Indicator
; the acoustical alarm stops, the Temperature Display
; the acoustical alarm stops, the Temperature Display
GB
remains on until a temperature < -10°C is reached.
remains on until a temperature < -10°C is reached.
Printed in Italy 07/15 - All rights reserved - http://www.whirlpool.eu
400010820177
Loading...