HOTPOINT TEPPAN YAKI UK User Manual
Please phone us on
08448 24 24 24
to activate your
guarantee
TEPPAN YAKI UK
English
Operating Instructions
HOB
Contents
Operating Instructions,1
Warnings,2
Description of the appliance,3
Installation,4
Start-up and use,5
Precautions and tips,7
Maintenance and care,7
After Sales Service,11
Guarantee,12
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Warnings
WARNING: The appliance and its
accessible parts become hot during use.
Care should be taken to avoid touching
heating elements. Children less than 8
years of age shall be kept away unless
continuously supervised. This appliance
can be used by children aged from 8 years
and above and persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
The appliance is not intended to be
operated by means of an external timer
or separate remote control system.
WARNING: Unattended cooking on a hob
with fat or oil can be dangerous and may
result in re. NEVER try to extinguish a
re with water, but switch off the appliance
and then cover ame e.g. with a lid or a
re blanket.
WARNING: Danger of re: do not store
items on the cooking surfaces.
WARNING: If the surface in glass-ceramic
is cracked, switch off the appliance to
avoid the possibility of electric shock.
Never use steam cleaners or pressure
cleaners on the appliance.
Do not place metal objects (knives,
spoons, pan lids, etc.) on the hob as they
may become hot.
After use, switch off the hob element by
its control and do not rely on the pan
detector.
2
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Description of the appliance
Overall view
1 ON/OFF knob
2 ON/OFF and residual heat indicator light
3 TEMPERATURE indicator light
4 TEMPERATURE ADJUSTMENT knob
The control panel described in this manual is only a
representative example: it may not exactly match the panel
on your appliance.
• ON/OFF knob switches the appliance on and off.
• ON/OFF indicator light signals that the appliance is
switched on or that the heating zone is still hot.
• TEMPERATURE indicator light indicates that the oven
is heating up to the set temperature.
• TEMPERATURE ADJUSTMENT knob is used to set the
temperature to the desired value.
GB
1 2
43
3
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Installation
TEPPAN YAKI UK
n
GB
! Before operating your new appliance please read this
instruction booklet carefully. It contains important information
for safe use, installation and care of the appliance.
700 mi
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Positioning
! Keep packaging material out of the reach of children. It can
become a choking or suffocation hazard (see Precautions
and tips).
! The appliance must be installed by a qualied professional
according to the instructions provided. Incorrect installation
may cause harm to people and animals or may damage
property.
Built-in appliance
Use an appropriate cabinet to ensure that the appliance
operates properly.
• The supporting surface must be heat-resistant up to a
temperature of approximately 100°C.
• Avoid installing the hob above a dishwasher: if this
cannot be avoided, place a waterproof separation device
between the two appliances.
• Depending on the hob you want to install (see gure),
the cabinet must have the following dimensions:
50 min
50 min
Securing the appliance to the cabinet
The appliance must be installed on a perfectly level
supporting surface.
Any deformities caused by improper xing could affect the
features and operation of the hob.
• Before tting the hob to the worktop, position the seal
provided along the perimeter of the hob, as illustrated in
the gure.
• The installation cavity should have the dimensions indicated
in the gure accompanying the previous paragraph.
460
510
79
495
445
Installing semi-ush hobs
All the necessary precautions must be taken in order to
install the appliance in conformity with current accident-
prevention regulations (CEI-UNI-CIG) relating to gas and
electrical connections. To ensure sit-on hobs installed in
kitchen cabinets operate correctly, the minimum distances
indicated should be observed (see gure). All adjacent
surfaces and the back panel should also be able to
withstand an overheating temperature of 65°C.
Fix the hob as follows:
1. Use the screws supplied to t the 4 alignment springs in
the holes provided at the central point of each side of the
part underneath the hob.
2. Place the hob in the cavity, make sure it is in a central
position and push down on the whole perimeter until the
hob is stuck to the supporting surface.
FRONT SIDE OF HOB
SUPPORTIN G
SURFAC E
Min. 40
UNDERSIDE
OF HOB
4
Loading...