HOTPOINT TDWSF 83B EP (UK) Daily Reference Guide

DAILY REFERENCE

GUIDE

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance, please register your appliance on http://www.hotpointservice.co.uk

Before using the appliance carefully read the Health and Safety guide.

PRODUCT DESCRIPTION

APPLIANCE

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door lter (behind door)

7. Condenser (= bottom lter;

behind ap)

8. Adjustable feet (4)

5. 4.

CONTROL PANEL

Door ﬁlter

Bottom ﬁlter

Drying time

Big items

Wool ﬁnish

Mixed

10.

11.

Sensing Drying End

90’

60’

30’

15’

1. Start delay function

2. Rapid option

3. Gentle option

4. Key lock

5. Drum reverse option

6. Anti-crease option

Water tank

Cupboard dry

Iron dry

Extra dry

Cupboard dry

Cotton

Synthetics

Anticrease

Start delay

Rapid Gentle

Key lock

Anti-

Drum

3 sec

Dry

crease

reverse

ﬁnishing

8Kg B

Extra dry

Iron dry

7. Dry nishing option

8. Programme selector

9. Start/Pause button

10. Failure indicators

11. Programme sequence indicator

9.8.

2. 7.3. 4. 5. 6.

FIRST TIME USE

BEFORE USING THE DRYER

CHECK DRAIN HOSE AND WATER TANK

Make sure that the drain hose on the back of the dryer is xed correctly, either to the dryer’s water tank (see picture), or to your domestic sewage system (see Installation guide).

Also make sure that the water tank is correctly inserted.

DAILY USE

See Use and Care Guide for more details on functions / see last page for information on how to obtain the Use and Care Guide

Make sure that no lighters

WARNING

or matches remain in the laundry.

1. LOAD LAUNDRY

Prepare your laundry according to the recommendations in section HINTS AND TIPS. Make sure that pockets are empty, fasteners closed and ribbons tied together.

Open the door and load the laundry. Observe the maximum load sizes given in the PROGRAMME CHART.

2. CLOSE DOOR

Make sure that no laundry gets stuck between door glass and door lter.

Make sure that the laundry is not soaked with ammable liquids.

4. START PROGRAMME

Press the Start/Pause button; the indicator next to the button lights up. The drying process starts.

The remaining programme duration is indicated on the display. It can be recalculated and adapted in the course of the programme. During such phases, an animation occurs on the display.

5. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF

NEEDED

To change the settings of a running programme or start delay:

• press Start/Pause to put the running programme on pause

• change your settings

• press Start/Pause again to continue the programme.

6. RESET A RUNNING PROGRAMME, IF NEEDED

Turn the programme selector to O/O.

WARNING

Immediately open the door and unload the laundry, so that eventual heat in the laundry can dissipate.

Close the door so that you can hear it click shut.

3. SET THE DESIRED PROGRAMME

Turn the knob to select the desired programme. The default programme duration appears on the display.

Find more information regarding programmes in the PROGRAMME

CHART.

Select options, if needed

If you want to select additional options, press the respective button

- the symbol on the display lights up.

Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more information.

7. SWITCH OFF THE DRYER AFTER PROGRAMME END

At the end of the programme, „End“ appears on the display. Turn the programme selector to O/O to switch o the dryer. Open the door and take out your laundry.

If you do not switch the dryer o after programme end, the dryer drum rotates from time to time the next 10 minutes after programme end, to reduce creasing of the laundry. The dryer will switch o automatically in about a quarter of an hour after programme end, to save energy.

8. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN

BO T TOM FILTE R

Refer to section CARE AND MAINTENANCE.

+ 5 hidden pages