Hotpoint SX 898 CK User Manual
Operating Instructions
Please phone us on
08448 24 24 24
to activate your
guarantee
OVEN
GB
English,1
SX 898 CX
SX 898 CW
SX 898 CK
Contents
GB
Installation, 2-3
Positioning
Electrical connection
Technical data
Description of the appliance, 4
Overall view
Control panel
Display
Start-up and use, 5-6
Control panel lock
Setting the clock
Setting the minute minder
Starting the oven
Restoring the factory settings
Standby
Modes, 7-10
Manual cooking modes
Automatic cooking modes
Programming cooking
Practical cooking advice
Cooking advice table
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 12-13
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assembling the sliding rack kit
Troubleshooting, 14
After Sales Service, 15
Guarantee, 16
Installation
560 mm.
45 mm.
GB
! Please keep this instruction booklet in a safe place
for future reference. If the appliance is sold, given
away or moved, please make sure the booklet is
also passed on to the new owners so that they may
benefit from the advice contained within it.
! Please read this instruction manual carefully: it
contains important information concerning the safe
operation, installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging
material; it should be disposed of in accordance
with local separated waste collection standards (
Precautions and tips
).
see
! The appliance must be installed by a qualified
professional in accordance with the instructions
provided. Incorrect installation may damage
property or cause harm to people or animals.
Built-in appliance
Use an appropriate cabinet to ensure that the
appliance operates properly:
• The panels adjacent to the oven must be made of
heat-resistant material.
Ventilation
To ensure adequate ventilation is provided, the back
panel of the cabinet must be removed. It is
advisable to install the oven so that it rests on two
strips of wood, or on a completely flat surface with
an opening of at least 45 x 560 mm (
see figures
).
Centring and fixing
Secure the appliance to the cabinet:
• Open the oven door.
• Remove the 2 rubber plugs covering the fixing
holes on the perimeter frame.
• Fix the oven to the cabinet using the 2 wood
screws.
• Replace the rubber plugs.
• Cabinets with a veneer exterior must be
assembled with glues which can withstand
temperatures of up to 100°C.
• to install the oven under the counter (
see diagram
)
or in a kitchen unit, the cabinet must have the
following dimensions:
! All parts which ensure the safe operation of the
appliance must not be removable without the aid of
a tool.
590 mm.
595 mm.
20 mm.
570 mm.
550 mm.
20,5 mm.
22,5 mm.*
550 mm.
min.
45 mm.
560 mm.
575-585 mm.
* Stainless steel models only
! The appliance must not come into contact with
electrical parts once it has been installed.
The indications for consumption given on the data
plate have been calculated for this type of
installation.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
2
Electrical connection
! Ovens equipped with a three-pole power supply
cable are designed to operate with alternating
current at the voltage and frequency indicated on
the data plate located on the appliance (
Fitting the power supply cable
1. Open the terminal
board by inserting a
screwdriver into the
side tabs of the cover.
Use the screwdriver as
a lever by pushing it
down to open the cover
see diagram
(
2. Loosen the cable
clamp screw and
remove it, using a
screwdriver as a lever
see figure
(
3. Remove the wire
contact screws L-Nthen fasten the wires
under the screw heads,
observing the colour
code: Blue (N), Brown (L) and Yellow-Green (
Connecting the electricity supply cable to the
mains
Install a standardised plug corresponding to the
load indicated on the data plate (
see table
The appliance must be directly connected to the
mains using an omnipolar switch with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The switch must be
suitable for the charge indicated and must comply
with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply
cable must be positioned so that it does not come
into contact with temperatures higher than 50°C at
any point (the back panel of the oven, for example).
see below
).
).
).
).
• the appliance is earthed and the plug is compliant
with the law;
GB
• the socket can withstand the maximum power of
the appliance, which is indicated on the data
plate (
see below
);
).
• the voltage is in the range between the values
indicated on the data plate (
see below
);
• the socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only (
The manufacturer declines any liability shouldThe manufacturer declines any liability should
!
The manufacturer declines any liability should
The manufacturer declines any liability shouldThe manufacturer declines any liability should
these safety measures not be observed.these safety measures not be observed.
these safety measures not be observed.
these safety measures not be observed.these safety measures not be observed.
see Assistance
).
,
APPLIANCE SPECIFICATIONS
Dimensions
Volume
Electrical
connections
ENERGY
LABEL*
width 43.5 cm
height 32 cm
depth 41.5 cm
58 l
voltage: 230 - 240 V~ 50/60 Hz
(see data plate)
maximum power absorbed
2800-3000 W
Directive 2002/40/EC on the label
of electric ovens. Standard EN 50304
Declared energy consumption
for Forced convection Class –
heating mode:
ECO.
! The installer must ensure that the correct electrical
connection has been performed and that it is fully
compliant with safety regulations.
Before connecting the appliance to the power
supply, make sure that:
* Without removable guide rails
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
3
Description of
the appliance
GB
Overall view
Control panel
SELECTOR
knob
Control panel
GRILL
DRIPPING PAN
CONTROL
PANEL
POWER BUTTON
DISPLAY
GUIDES for the
sliding racks
position 5
position 4
position 3
position 2
position 1
THERMOSTAT /
TIMER
knob
Display
CONTROL PANEL LOCK
TEMPERATURE and TIME
MODE
icons
Residual heat
LIGHT
icon
icon
TIMER
numerical digits
Preheating /
indicator
icon
MINUTE MINDER
icon
DURATION
CONTROL
PANEL LOCK
indicator
START /
STOP
icon
END OF COOKING
icon
CLOCK
icon
MINUTE MINDER
icon
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
4
Start-up and use
! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
! To make the setting process easier, keep the knob
in position: this will increase the scrolling speed of
the numbers on the display.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! The touch controls cannot be activated if the user
is wearing gloves.
Some models are equipped with a system of hinges
which allows the door to close slowly, without the
user having to follow the movement through with his/
her hand. To use the system correctly, before
closing the door:
• Open the door fully.
• Do not force the closing movement manually.
press the
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the
indicates that the clock has not been set correctly.
button.
icon flashes on the display, this
Setting the minute minder
! The minute minder may still be set whether the
oven is switched on or off. It does not switch the
oven on or off.
When the set time has elapsed, the timer emits a
buzzer that will automatically stop after 30 seconds
or when any active button on the control panel is
pressed.
To adjust the timer proceed as follows:
1. Press button
2. Adjust the time as desired by turning the TIMER
knob towards “
3. Once you have reached the desired value, press
the button again.
The lit
minder is on. The DISPLAY will show the countdown.
symbol will remind you that the minute
.
++
+” and “
++
--
-”.
--
GB
Control panel lock
! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer sounds and
the display shows the key symbol “n—O”. The
icon, when lit, indicate lock function activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.
Setting the clock
! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the
time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
display will flash for 10 seconds.
To set the clock:
1. Press button
2. Turn the TIMER knob towards “
adjust the hour value.
3. Once you have reached the correct hour value,
button once will display the current
button and the digits on the
.
++
+” and “
++
--
-” to
--
To cancel the minute minder, press the
and use the knob to set the time to 00:00. Press
button
The
minute minder has been disabled.
again.
icon will switch off to indicate that the
button
Starting the oven
1. Switch the control panel on by pressing the
button. The appliance buzzer sounds three times
(ascending) and all buttons light up in sequence.
2. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;
- “Auto” and the duration alternately, if programming
is automatic.
3. Press the
4. The oven will begin its preheating phase, the
preheating indicators will light up as the temperature
rises.
5. When the preheating process has finished, a
buzzer sounds and all the preheating indicator lights
show that this stage has been completed: the food
can then be placed in the oven.
6. During cooking it is always possible to:
- modify the temperature by turning the
button to begin cooking.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
5
Loading...