Hotpoint SX 896L PX S User Manual

Please phone us on

08448 24 24 24

to activate your

guarantee

SX 896L PX S

English

Operating Instructions

OVEN

Operating Instructions,1
Warnings,2
Description of the appliance,3
Installation,4
Electrical Connection,5
Start-up and use,6
Modes,7
Precautions and tips,11
Maintenance and care,11
Troubleshooting,14
Afetr Sales Service,15
Guarantee,16

Contents

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Warnings

GB

WARNING: The appliance and its
accessible parts become hot during use.
Care should be taken to avoid touching
heating elements. Children less than 8
years of age shall be kept away unless
continuously supervised. This appliance
can be used by children aged from 8 years
and above and persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.

Keep children away from the appliance
during the automatic cleaning cycle as
surfaces may become very hot.

! When you place the rack inside, make
sure that the stop is directed upwards
and in the back of the cavity.

Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the oven
door glass since they can scratch the
surface, which may result in shattering
of the glass.

Never use steam cleaners or pressure
cleaners on the appliance.

WARNING: Ensure that the appliance is
switched off before replacing the lamp
to avoid the possibility of electric shock.

Before initiating the automatic cleaning
cycle:

• clean the oven door;

• remove large or coarse food residues

from the inside of the oven using a damp

sponge. Do not use detergents;

• remove all accessories and the sliding
rack kit (where present);

• do not place tea towels

2

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Description of the appliance

Overall view

1. POSITION 1

2. POSITION 2

3. POSITION 3

4. POSITION 4

5. POSITION 5

6. GUIDES for the sliding racks

7. DRIPPING PAN

8. GRILL

9. Control panel

9 6

8

7

5

3

1

GB

4

2

Control panel

10. SELECTOR knob

11. CONTROL PANEL POWER BUTTON

12. DISPLAY

13. THERMOSTAT / TIMER knob

14. START / STOP

15. FAST CLEAN icon

16. MINUTE MINDER icon

17. TIMER icon

18. DOOR / CONTROL PANEL LOCK icon

19. LIGHT icon

10

11

12

Display

20. TEMPERATURE and TIME numerical digits

21. DURATION icon

22. END OF COOKING icon

23. CLOCK icon

24. MINUTE MINDER icon

25. CONTROL PANEL LOCK indicator

26. DOOR LOCK indicator

27. Preheating / Residual heat indicator

28. MODE icons

13

19

18

15

17

14

16

20 21 22

232425262728

3

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Installation

590 mm.

GB

! Please keep this instruction booklet in a safe place for
future reference. If the appliance is sold, given away or
moved, please make sure the booklet is also passed on to

the new owners so that they may benet from the advice

contained within it.

Ventilation

To ensure adequate ventilation, the back panel of the
cabinet must be removed. It is advisable to install the oven
so that it rests on two strips of wood, or on a completely

at surface with an opening of at least 45 x 560 mm (see

diagrams).

! Please read this instruction manual carefully: it contains
important information concerning the safe operation,
installation and maintenance of the appliance.

Positioning

! Do not let children play with the packaging material; it

should be disposed of in accordance with local separated
waste collection standards (see Precautions and tips).

! The appliance must be installed by a qualied professional

in accordance with the instructions provided. Incorrect
installation may damage property or cause harm to people
or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance
operates properly:

• The panels adjacent to the oven must be made of heat-

resistant material.

• Cabinets with a veneer exterior must be assembled with

glues which can withstand temperatures of up to 100°C.

• To install the oven under the counter (see diagram) or
in a kitchen unit, the cabinet must have the following
dimensions:

45 mm.

560 mm.

Centring and xing

Secure the appliance to the cabinet:

• Open the oven door.

• slide out the side gaskets at the top until the 2 xing holes
are exposed;

• Fix the oven to the cabinet using the 2 wood screws.

• reposition the 2 gaskets.

! All parts which ensure the safe operation of the appliance
must not be removable without the aid of a tool.

550 mm.

min.

45 mm.

560 mm.

575-585 mm.

570 mm.

595 mm.

20 mm.

550 mm.

20,5 mm.

22,5 mm.*

* Stainless steel models only

! The appliance must not come into contact with electrical
parts once it has been installed.
The indications for consumption given on the data plate
have been calculated for this type of installation.

4

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Electrical Connection

Unplug the appliance before all operations, even
when replacing the oven lamp.

GB

The electrical connection to the mains must be made on
the appliance. The power voltage and frequency are as
indicated on the rating plate.

! THIS APPLIANCE MUST BE EARTHED.

Fitting the power supply cable

1. Open the terminal board
by inserting a screwdriver
into the side tabs of the
cover. Use the screwdriver
as a lever by pushing it
down to open the cover (see
diagram)
.

2. Install the power supply
cable by loosening the
cable clamp screw and the
three wire contact screws

L

L-N-

.
Connect the wires to the
corresponding terminals:
the Blue wire to the terminal
marked (N), the Brown wire
to the terminal marked (L)
and the Yellow/Green wire

to the terminal marked

N

(see diagram).

3. Secure the cable by fastening the clamp screw.

4. Close the cover of the terminal board.

Electrical Connection:

Using the appliance without correct earthing is highly
dangerous.

! After connecting the appliance to the exible cable,

tighten all the screws on the terminal board.

! The cable must be checked regularly and replaced
by authorised technicians only (see Assistance).

APPLIANCE SPECIFICATIONS

width 43.5 cm

Dimensions*

Volume*

Dimensions**

Volume**

Electrical
connections

ENERGY
LABEL

height 32,4 cm
depth 41.5 cm

59 l

width 45.5 cm
height 32,4 cm
depth 41.5 cm

62 l

voltage: 230-240V~ 50/60Hz or 50Hz
(see data plate)
maximum power absorbed
2800-3000 W

Directive 2002/40/EC on the label
of electric ovens. Standard EN 50304

Declared energy consumption
for Forced convection Class –
heating mode:
ECO.

Voltage Frequency: see data plate
Fuse Section: 16A

Supply cable: 3x1.5mm

2

You can connect your oven to the system means of a
terminal board. Refer to above information for the minimal
cable sections and the calibration of the protective elements
according to the connection.
If the appliance is installed with a junction box, an
omnipolar circuit breaker - with a minimum contact
opening of 3mm - should be installed between the appliance
and the mains.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is
long enough to allow you to take the oven out of its recess
in the event of maintenance operations (only use HAR - H

05 - RRF quality cables tted with a plug conforming to the

regulations in force.
The plug must be accessible at all times.

* Only for models with drawn rails.
** Only for models with wire rails.

5