Operating Instructions,1
Warnings,2
Description of the appliance,3
Installation,5
Electrical Connection,5
Start-up and use,7
Modes,8
Precautions and tips,14
Maintenance and care,14
Troubleshooting,16
Afetr Sales Service,17
Guarantee,18
Contents
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Warnings
GB
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised. This appliance can be used by children
aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
by children without supervision.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering
of the glass.
Never use steam cleaners or pressure cleaners on
the appliance.
WARNING: Ensure that the appliance is switched
off before replacing the lamp to avoid the possibility
of electric shock
! When you place the rack inside, make sure that the
stop is directed upwards and in the back of the cavity.
.
2
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Description of the appliance
7
1
3
4
5
10
1112131514
16171819202122
Overall view
1. POSITION 1
2. POSITION 2
3. POSITION 3
4. POSITION 4
5. POSITION 5
6. GUIDES for the sliding racks
7. DRIPPING PAN
8. GRILL
9. Control panel
Control panel
GB
96
8
2
10. CONTROL PANEL POWER BUTTON
11. SETTINGS icon
12. MANUAL COOKING MODES icon
13. DISPLAY
14. TEMPERATURE icon
15. DOOR / CONTROL PANEL LOCK icon
16. START / STOP
17. MINUTE MINDER icon
18. TIME icon
19. SELECTOR control dial
20. AUTOMATIC COOKING MODES icon
21. CONFIRM SETTINGS icon
22. LIGHT icon
3
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Display in programming mode
232425
2627282930
GB
23. Cooking mode number indicator
24. Selected menu indicator
25. Temperature indicator
26. COOKING DURATION indicator
27. Suggests a course of action or displays the activity currently being
performed by the oven
28. END OF COOKNG TIME indicator
29. TIME indicator
30. Selected cooking mode icon / recommended rack position icon
Display in cooking mode
31. Animated cooking icon
32. Selected menu indicator
33. Suggests a course of action or displays the activity currently being
performed by the oven
34. Temperature indicator
35. Preheating / Residual heat indicators
36. COOKING DURATION indicator
37. END OF COOKNG TIME indicator
38. Cooking progress indicator
31323334
35
363837
4
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Installation
590 mm.
! Please keep this instruction booklet in a safe place for future reference. If
the appliance is sold, given away or moved, please make sure the booklet is
also passed on to the new owners so that they may benet from the advice
contained within it.
Centring and xing
Secure the appliance to the cabinet:
• Open the oven door.
• Remove the 2 rubber plugs covering the xing holes on the perimeter
frame.
• Fix the oven to the cabinet using the 2 wood screws.
• Replace the rubber plugs.
! Please read this instruction manual carefully: it contains important information
concerning the safe operation, installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging material; it should be disposed
of in accordance with local separated waste collection standards (see
Precautions and tips).
! The appliance must be installed by a qualied professional in accordance
with the instructions provided. Incorrect installation may damage property or
cause harm to people or animals.
GB
Built-in appliances
Use an appropriate cabinet to ensure that the appliance operates properly:
! All parts which ensure the safe operation of the appliance must not be
removable without the aid of a tool.
• The panels adjacent to the oven must be made of heat-resistant material.
• Cabinets with a veneer exterior must be assembled with glues which can
withstand temperatures of up to 100°C.
Electrical Connection
• To install the oven under the counter (see diagram) or in a kitchen unit,
the cabinet must have the following dimensions:
The electrical connection to the mains must be made on the appliance. The
power voltage and frequency are as indicated on the rating plate.
! THIS APPLIANCE MUST BE EARTHED.
Fitting the power supply cable
595 mm.
20 mm.
570 mm.
550 mm.
20,5 mm.
22,5 mm.*
550 mm.
min.
45 mm.
560 mm.
575-585 mm.
! The appliance must not come into contact with electrical parts once it has
been installed. The indications for consumption given on the data plate have
been calculated for this type of installation.
N
Ventilation
To ensure adequate ventilation, the back panel of the cabinet must be
removed. It is advisable to install the oven so that it rests on two strips of
wood, or on a completely at surface with an opening of at least 45 x 560
mm (see diagrams).
L
45 mm.
560 mm.
1. Open the terminal board by
inserting a screwdriver into the side
tabs of the cover. Use the screwdriver
as a lever by pushing it down to open
the cover (see diagram)
.
2. Install the power supply cable by
loosening the cable clamp screw
and the three wire contact screws
L-N-.
Connect the wires to the
corresponding terminals: the Blue
N
wire to the terminal marked (N), the
Brown wire to the terminal marked
(L) and the Yellow/Green wire to the
L
3. Secure the cable by fastening the
terminal marked
(see diagram).
clamp screw.
4. Close the cover of the terminal
board.
5
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Electrical Connection:
* Only for models with drawn rails
** Only for models with wire rails
GB
Voltage Frequency: see data plate
Fuse Section: 16A
Supply cable: 3x1.5mm
2
You can connect your oven to the system means of a terminal board. Refer
to above information for the minimal cable sections and the calibration of the
protective elements according to the connection.
If the appliance is installed with a junction box, an omnipolar circuit breaker
- with a minimum contact opening of 3mm - should be installed between the
appliance and the mains.
Power cable supply connection to the electrical mains:
We recommend you use a power supply cable which is long enough to allow
you to take the oven out of its recess in the event of maintenance operations
(only use HAR - H 05 - RRF quality cables tted with a plug conforming to
the regulations in force.
The plug must be accessible at all times.
Unplug the appliance before all operations, even when replacing the
oven lamp. Using the appliance without correct earthing is highly
dangerous.
! After connecting the appliance to the exible cable, tighten all the
screws on the terminal board.
APPLIANCE SPECIFICATIONS
width 43.5 cm
Dimensions*
Volume*
Dimensions**
Volume**
Electrical
connections
ENERGY LABEL
and
ECODESIGN
height 32,4 cm
depth 41.5 cm
59 l
width 45.5 cm
height 32,4 cm
depth 41.5 cm
62 l
voltage: 230-240V~ 50/60Hz or 50Hz
(see data plate)
maximum power absorbed
2800-3000 W
EU Directive no 65/2014
supplementing Directive 2010/30/EU.
EU Regulation no 66/2014
implementing Directive 2009/125/EC.
Standard EN 60350-1
Standard EN 50564
Declared energy consumption for
Forced convection Class –
heating mode: ECO.
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EC of 12/12/06 (Low
Voltage) and subsequent
amendments;
- 2004/108/EC of 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments;
- 93/68/EEC of 22/07/93 and
subsequent amendments.
- 2002/96/EU and subsequent
amendments.
- 1275/2008 standby/off mode.
6
.
.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.