Hotpoint RSA 21, RSAAV21P User Manual 2

Instructions for Installation and UseInstructions for Installation and Use
Instructions for Installation and Use
Instructions for Installation and UseInstructions for Installation and Use
RefrigeratorRefrigerator
Refrigerator
RefrigeratorRefrigerator
Model RSA 21 RSAAV21P
CONTENTSCONTENTS
CONTENTSCONTENTS
Product Safety Installation Electrical Connection Get to Know your Appliance Getting your Appliance ready for use How to use the Refrigerator Compartment Freezing Food Energy Saving Tips Food Storage Caring for your Appliance Troubleshooting Door reversal After Sales Service Hotpoint Guarantee Key Contacts
3 3 4 5 6
6-7
7 8
9-10
11 12 13 14 15
Back Cover
Retention of this Instruction BookRetention of this Instruction Book
Retention of this Instruction Book
Retention of this Instruction BookRetention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from: Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
2
PRODUCT SAFETYPRODUCT SAFETY
PRODUCT SAFETY
PRODUCT SAFETYPRODUCT SAFETY
ATTENTION
Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance. Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi­nation of radio interference (EC directive 87/308 - 02.06.89).
1.1.
1. This appliance must not be installed outdoors - not even
1.1. in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.
2.2.
2. It must only be used by adults and exclusively to re-
2.2. frigerate and freeze foodstuffs, following the instructions for use contained in this manual.
3.3.
3. Do not ever touch or handle the appliance with bare
3.3. feet or with wet hands or feet.
4.4.
4. It is highly recommended that you do not use extension
4.4. cords or multiple socket adapters. If the refrigerator is in­stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.
5.5.
5. Never pull on the cord or the refrigerator to remove the
5.5. plug from the wall socket - this is very dangerous.
6.6.
6. Never touch the cooling components within the appli-
6.6. ance, especially with wet hands because this could result in injury.
7.7.
7. Never put ice cubes just removed from the freezer into
7.7. your mouth because they could stick to your mouth and
cause burns.
8.8.
8. Never clean the appliance or perform maintenance
8.8. without first disconnecting it from the electrical mains. Turning the thermostat knob to the "OFF" setting does not suffice to break all electrical contact with the mains.
9.9.
9. Before having your old refrigerator picked up for dis-
9.9. posal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.
10.10.
10. Before calling for service/assistance in the case of
10.10. malfunction, consult the chapter entitled “Troubleshooting" to determine whether it is possible to eliminate the prob­lem. Do not try to repair the problem by trying to access the internal components of the appliance.
11.11.
11. If damaged, the power supply cord on this appliance
11.11. must necessarily be replaced by our service centre because special tools are required for replacement.
12. 12.
12. Do not use electric appliances inside the compartment
12. 12. for food storage, if these are not those recommended by the manufacturer.
13.13.
13. At the end of the functional life of your appliance –
13.13. containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.
INSTALLATIONINSTALLATION
INSTALLATION
INSTALLATIONINSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
INSTALLATIONINSTALLATION
To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly.
Ventilation
The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing refrigerator in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance. During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.
Away from Heat
Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.
Electrical Connection and Earthing
Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located at the bottom left near the fruit and vegetable crisper,
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
corresponds to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.
Position the appliance in such a way that you can access the socket where it is plugged in. Insufficient power?
The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located at the bottom left next to the vegeta­ble crisper.
Before making the electrical connection ...
After the appliance has been delivered, place it in the ver­tical upright position and wait at least 3 hours before in­serting the plug into the socket in order to ensure that it functions properly.
3
ELECTRICAL CONNECTIONELECTRICAL CONNECTION
ELECTRICAL CONNECTION
ELECTRICAL CONNECTIONELECTRICAL CONNECTION
Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.
Fitting a new plug
IMPORTANT:
WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE...
Green and Yellow - Earth Blue - Neutral Brown - Live
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
- Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.
- Connect Brown wire to terminal marked 'L' or coloured red or brown.
- Connect Blue wire to terminal marked 'N' or coloured Black or Blue.
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:
- The plug is replaced by a fused 13amp re­wireable plug bearing the BSI mark of approval.
or
- The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug. Remove the fuse.
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.
If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.
CE Marking certifies that this appliance conforms to the following EEC directives : Low V oltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
4
I
GET TO KNOW YOUR APPLIANCEGET TO KNOW YOUR APPLIANCE
GET TO KNOW YOUR APPLIANCE
GET TO KNOW YOUR APPLIANCEGET TO KNOW YOUR APPLIANCE
Temperature control
A
This regulate the temperature inside the appliance automatically. To adjust the temperature control, use a coin to turn the knob.
Removable door shelves with lid and egg
B
tray
Removable miscellaneous shelf
C
Hinged shelf
D
Compartment for a 2 litre bottle
E
Removable door shelf for bottles
F
Fruit and Vegetable Crisper
G
Drain for Defrost Water
H
Removable, Height-adjustable Shelves
Compartment for storing frozen foods,
J
freezing fresh foods and making ice
Levelling feet
K
J
I
H
G
A
B
C
D
E
F
K K
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
5
Loading...
+ 11 hidden pages