HOTPOINT RD 966 JKD UK N Daily Reference Guide
Quick Guide
1
2
A
B
*
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the
appliance on www.hotpoint.eu/register
CONTROL PANEL
1. ON/OFF button
2. DRYING button
3. DRYING ONLY button
4. MULTI RINSE button
5. OPTION button
6. DIRECT INJECTION button
7. START/PAUSE button and indicator light
8. KEY LOCK button
9. DELAY TIMER button
10. SPIN button
11. TEMPERATURE button
12. AUTO CLEAN button
13. WASH CYCLE SELECTOR KNOB
WASH CYCLE TABLE
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
1 2
13
12
3
DISPLAY
11
10
9
4
5 6
8
EN
7
Maximum load 9 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Wash cycle
Temperature
Setting Range 2 3
Anti-Stain Turbo
1
(Anti-Stain Turbo 45‘)
Anti-Stain 20°
2
(Anti-Stain Power 20°)
40 °C
20 °C
3 Cotton (2) 40 °C
4 Synthetics (3) 40 °C
5
6
Rapid 30’
(Fast 30’)
Mix Wash & Dry
(Wash & Dry Mix)
30 °C
40 °C 40 °C 800 3.5 **
- 40 °C
- 20 °C
- 60 °C
- 60 °C
- 30 °C
Max.
spin speed
(rpm)
1200 4.5 **
1600 9.0 **
1600 9.0 3:55
1200 4.0 2:55
800 4.5 0:30 **** 4.5
Max.
load for
washing
(kg)
Duration
7 Shirts Wash & Dry 40 °C 40 °C 1000 2.0 **
8 Wool 40 °C
- 40 °C
800 2.0 **
1551 9.0 3:40
9 Eco 40-60 (1) 40 °C 40°C
1551 4.5 2:50
1551 2.25 2:10
10 20°C 20 °C
11
White
(Whites)
60 °C
- 20 °C
- 90 °C
1600 9.0 1:50
1600 9.0 2:45
12 Anti Allergy 60°C 40 °C - 60 °C 1600 5.0 **
(h : m)
Max.
load for
drying
Drying
(kg)
4.5
6.0
6,0
4.0
3.5
2.0
2.0
6.0
6.0
6.0
5.0
Detergents and
Additives
Wash
Fabric
softener
Recommended
detergent
Powder
–
–
–
–
–
–
–
(***)
Residual
Liquid
dampness %
– – – –
– – – –
49 1,40 105 45
35 0.80 55 43
71 0.20 45 27
– – – –
– – – –
– – – –
44,5 1.01 60 36
44,5 0.75 54 36
44,5 0.55 39 33
49 0.16 90 22
49 0.90 90 55
– – – –
Energy
consumption
13 Steam Refresh – – – 2.0 ** – – – – – – – – – –
14
Ultradelicates
(Ultra Delicates)
Rinse&Spin
(Rinse)
Spin&Drain *
(Spin + Pump out)
30 °C
- 30 °C
– 1.0 **
– – 1600 9.0 **
– – 1600 9.0 **
1.0
6.0 –
6.0 – – – – – – – –
–
– – – –
– – – – – –
Required dosage Optional dosage
3 Eco Cotton (4) 60 °C 60 °C 1600 9.0 3:50
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 (Wash) - Test wash c ycle in compliance with EU Ecodesign r egulation
2019/2014. The most ecient programme in terms of energy and water consumption for
washing normally soiled cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated in
the table.
Eco 40-60 (Dr ying)2019/2014
“Drying” option level to
water consumption for washing and drying normally soiled cotton laundry. (Cycle duration:
full load 9h:55’ / half load 6h:10’).
Test drying cycle in compliance with EU Ecodesign regulation
. To access “wash and dry” cycle select “Eco 40-60” wash programme and set
“
Cupboard
”.
The most ecient programme in terms of energy and
PRODUCT DESCRIPTION
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
2.
7.
8.
1.
3.
4.
5.
6.
6.0
For all testing institutes:
2) Long cotton cycle: set programme 3 at temperature 40°C.
3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.
4) Eco Cotton -
at a temperature of 60°C to access this cycles.
Test wash cycle in compliance with regulations 1061/2010. Set “3” wash cycle
44 1.17 60 –
* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** The duration of the wash cycles can be checked on the display.
*** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
**** If a drying cycle is also programmed, the machine will run a “wash+dry” programme
lasting 45’ and a 1kg laundry load.
DETERGENT DISPENSER DRAWER
Compartment *:
Do not insert detergent in this compartment.
Compartment 1: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, place the partition
into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “MAX”
level.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
kWh
Total water lt
Laundry
temperature °C
WASH CYCLES
2:55
90°
1200
-- h
--
COTONE
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Anti-Stain Turbo
This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics
and coloured garments.
Anti-Stain 20°C
this programme ensures maximum stain removal capacity with no need
for pre-treatment at low temperatures, preserving fabrics and colours.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Specic for synthetic items. If the dirt is dicult to remove, the
temperature can be increased up to 60° and powder detergent can be
used too.
Rapid 30’
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Mix Wash & Dry
use programme 6 to wash and dry mixed garments (cotton and
synthetics). This cycle may be used to wash and dry loads of up to 3.5 kg;
we recommend the use of liquid detergent.
The use of the steam in this programme is optimised to reduce the
formation of creases on garments, making them easier to iron.
Shirts Wash & Dry
Use programme 7 to wash and dry shirts and T-shirts in dierent fabrics
and colours to ensure maximum care. This cycle may be used to wash and
dry loads of up to 2 kg. To achieve optimum results, use liquid detergent
and pre-treat cus, collars and stains. The use of the steam in this
programme is optimised to reduce the formation of creases on garments,
making them easier to iron.
Wool - Woolmark Apparel Care - Green:
the wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash” provided that the
products are washed according to the instructions on the
garment label and those issued by the manufacturer of
this washer-dryer. (M1318)
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C
or 60 °C, together in the same cycle. This is the standard cotton programme
and the most ecient in terms of water and energy consumption.
20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
White
For heavily soiled whites and resistant colours.
Anti Allergy
Suitable for removing major allergens such as pollen, mites and cat or
dog hair.
Steam Refresh
For refreshing garments, neutralised unpleasant odours and relaxing the
bres by delivering steam into the drum. The garments will be damp at
the end of the cycle.
Ultradelicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
We recommend turning the garments inside out before washing and
placing small items into the special bag for washing delicates. Use liquid
detergent on delicate garments for best results.
When selecting an exclusively time-based drying function, a drying cycle
is performed at the end of the wash cycle that is particularly delicate,
thanks to light handling and appropriate temperature control of the
water jet.
The recommended durations are:
1 kg of synthetic garments --> 165 min
1 kg of synthetic and cotton garments --> 180 min
1 kg of cotton garments --> 180 min
The degree of dryness depends on the load and fabric composition.
Rinse&Spin
Designed for rinsing and spinning.
Spin&Drain
Designed for spinning and draining the water.
Eco Cotton
For washing normally soiled cotton garments at 60°C.
DISPLAY
The display is useful when programming the machine and provides a
great deal of information.
C
G
L M
F
I
C
X Z
A
C
H
B
Y
E
D
The following will appear in area A: the icon and programme selected, the
washing and drying phases and time remaining to the end of the cycle.
Area B will include the two intensity levels relative to the DIRECT
INJECTION option. The indicator lights relative to the available functions
appear in area C. Area D will display the time remaining to the start of the
selected cycle if the DELAY TIMER function was set.
Area E will display the maximum available spin speed on the basis of the
set cycle; if the cycle does not include the spin cycle setting, the dimly lit
“--” symbol will appear in the area.
Area F will show the temperature value that can be selected on the basis
of the set cycle.
If the cycle does not include setting of the temperature, the dimly lit “--”
symbol will appear in the area.
! The rst time the machine is switched on, you will be asked to select the
language and the display will automatically show the language selection
menu.
To select the desired language press the X and Y buttons; to conrm the
selection press the Z button.
To change the language switch o the machine and press buttons G, H, I
simultaneously until an alarm is heard: the language-selection menu will
be displayed again.
! To change the display luminosity, which by default is set to the highest
value, switch the machine o then simultaneously press buttons G, L and
M until the buzzer sounds.
Press buttons X and Y to choose the desired level of luminosity then
conrm by pressing button Z.
! During the wash cycle or when the DELAY TIMER function has been
enabled, if the user does not interact with the display for 1 minute the
SCREEN SAVER activates. To return to the previous window, simply press
any button.
LOCKED DOOR INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the “Auto
Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; “HOTPOINT” will appear on the display; the
indicator light relative to the START/PAUSE button will ash slowly
green.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- Use the WASH CYCLE selector knob to select the desired wash cycle: the
cycle’s name will appear on the display; the cycle will be associated with a
specic temperature and spin speed which can be modied. The duration
of the cycle will appear on the display.
- Modify the temperature and/or spin speed: the machine automatically
selects the maximum temperature and spin speed set for the selected
wash cycle; these values cannot therefore be increased. Pressing the
button gradually reduces the temperature down to the cold wash setting
(the “--” symbol will appear on the display). Pressing the button
gradually reduces the spin speed until it is completely excluded (the “--”
symbol will appear on the display). Pressing the buttons further restores
the maximum allowed values for the selected cycle.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady green and the door will lock (
symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash amber. To start the wash cycle from the point at
which it was interrupted, press the START/PAUSE button again.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “CYCLE END” on the display; when the
symbol switches o, the door may be opened. Open the door and
switch o the machine. If you do not press ON/OFF button, the
washing machine will switch o automatically after about a 10 minutes.
Close the water tap and unload the washing machine. Leave the door ajar
to allow the drum to dry.
Loading...