Posizionamento e collegamento
Reversibilità apertura porte
Descrizione dellapparecchio, 3-4
Pannello di controllo
Vista d’insieme
Avvio e utilizzo, 5-8
Avviare l’apparecchio
Sistema di raffreddamento
Ever Fresh
Utilizzare al meglio il frigorifero
Utilizzare al meglio il congelatore
Manutenzione e cura, 9
Escludere la corrente elettrica
Pulire l’apparecchio
Evitare muffe e cattivi odori
Sostituire la lampadina
Precauzioni e consigli, 10
Sicurezza generale
Smaltimento
Risparmiare e rispettare l’ambiente
Anomalie e rimedi, 11
Assistenza, 12
Assistenza attiva 7 giorni su 7
Installazione
! È importante conservare questo libretto per poterlo
I
consultare in ogni momento. In caso di vendita,
di cessione o di trasloco, assicurarsi che resti insieme
all’apparecchio.
!Leggere attentamente le istruzioni: ci sono importanti
informazioni sull’installazione, sull’uso e sulla sicurezza.
Posizionamento e collegamento
Posizionamento
1. Posizionare l’apparecchio in un ambiente ben aerato
e non umido.
2. Non ostruire le griglie posteriori di ventilazione:
compressore e condensatore emettono calore e
richiedono una buona aerazione per funzionare bene
e contenere i consumi elettrici.
3. Lasciare una distanza di almeno 10 cm tra la parte
superiore dell’apparecchio ed eventuali mobili sovrastanti
e di almeno 5 cm tra le fiancate e mobili/pareti laterali.
4. Lasciare l’apparecchio lontano da fonti di calore
(la luce solare diretta, una cucina elettrica).
5. Per mantenere una ottimale distanza del prodotto
dalla parete posteriore, montare i distanzieri presenti
nel kit di installazione seguendo le istruzioni presenti
sul foglio dedicato.
Reversibilità apertura porte
1
2
3
Livellamento
1. Installare l’apparecchio su un pavimento piano e rigido.
2. Se il pavimento non fosse perfettamente orizzontale,
compensare svitando o avvitando i piedini anteriori.
Collegamento elettrico
Dopo il trasporto, posizionare l’apparecchio
verticalmente e attendere almeno 3 ore prima di
collegarlo all’impianto elettrico. Prima di inserire la spina
nella presa della corrente, accertarsi che:
• la presa abbia la messa a terra e sia a norma di legge;
• la presa sia in grado di sopportare il carico massimo
di potenza della macchina, indicato nella targhetta
caratteristiche posta nel vano frigorifero in basso
a sinistra (es 150 W);
• la tensione di alimentazione sia compresa nei valori
indicati nella targhetta caratteristiche, posta in basso
a sinistra (es 220-240 V);
• la presa sia compatibile con la spina dell’apparecchio.
In caso contrario richiedere la sostituzione della spina
a un tecnico autorizzato (
prolunghe e multiple.
! Ad apparecchio installato, il cavo elettrico e la presa
della corrente devono essere facilmente raggiungibili.
! Il cavo non deve subire piegature o compressioni.
! Il cavo deve essere controllato periodicamente
e sostituito solo da tecnici autorizzati (vedi Assistenza).
! Lazienda declina ogni responsabilità qualora
queste norme non vengano rispettate.
vedi Assistenza
); non usare
4
5
∅3
mm
2
Descrizione
dellapparecchio
Pannello di controllo
Manopola
FUNZIONAMENTO
FRIGORIFERO
EVER FRESH
Tasto
EVER FRESH
Spia
Spia
ALIMENTAZIONE
Spia
SUPER FREEZE
Tasto
SUPER FREEZE
I
Manopola
FUNZIONAMENTO
CONGELATORE
• Manopola FUNZIONAMENTO FRIGORIFERO
per regolare la temperatura del vano frigorifero.
è la temperatura ottimale a bassi consumi.
è la funzione holiday (
cura
).
OFF spegne il frigorifero.
• Tasto EVER FRESH (conservazione sottovuoto) per
conservare gli alimenti freschi mantenendo
inalterato l’aspetto, il gusto e le caratteristiche
organolettriche e nutrizionali.
• Spia gialla EVER FRESH:
si accende quando viene premuto il tasto EVER
FRESH.
• Spia verde ALIMENTAZIONE: si accende quando
l’apparecchio è collegato alla rete di alimentazione.
vedi Manutenzione e
• Tasto SUPER FREEZE (congelamento rapido) per
congelare alimenti freschi. Quando viene premuto
si accende la spia SUPER FREEZE (
).
utilizzo
• Spia gialla SUPER FREEZE (congelamento
rapido):si accende quando viene premuto il
tasto SUPER FREEZE.
• Manopola FUNZIONAMENTO CONGELATORE
per regolare la temperatura del vano congelatore.
è la temperatura ottimale a bassi consumi.
spegne l’apparecchio, frigorifero compreso.
! Le spie servono anche per segnalare un anomalo
aumento di temperatura nel vano congelatore
vedi Anomalie e rimedi
(
).
vedi Avvio e
3
Descrizione
dellapparecchio
Vista dinsieme
I
Le istruzioni sull’uso valgono per diversi modelli per cui è possibile che la figura presenti particolari differenti
rispetto a quelli dell’apparecchio acquistato. La descrizione degli oggetti più complessi si trova nelle pagine seguenti.
Pannello di controllo
Lampadina
vedi Manutenzione
(
)
Balconcino estraibile
con coperchio e
conPORTAUOVA
RIPIANO
EVER FRESH
Cassetto
FRUTTA e
VERDURA
Bacinella ghiaccio
Ice Care
Vano
CONGELAMENTO e
CONSERVAZIONE
Bacinella ghiaccio
Ice Care
Balconcino
PORTALATTINE
Balconcino estraibile
PORTAOGGETTI
•
Balconcino
BOTTIGLIE
*
Vano
CONSERVAZIONE
PIEDINO
di regolazione
Variabili per numero e/o per posizione.
Presente solo in alcuni modelli.
*
4
Avvio e utilizzo
Avviare lapparecchio
! Prima di avviare lapparecchio, seguire
le istruzioni sullinstallazione (
! Prima di collegare l’apparecchio pulire bene i vani e
gli accessori con acqua tiepida e bicarbonato.
! L’apparecchio è provvisto di un controllo salvamotore
che fa avviare il compressore solo dopo circa 8 minuti
dall’accensione. Questo accade anche dopo ogni
interruzione dell’alimentazione elettrica, volontaria o
involontaria (black out).
1. Posizionare la manopola FUNZIONAMENTO
CONGELATORE su
2. Inserire la spina nella presa e accertarsi che si
accenda la spia verde ALIMENTAZIONE.
3. Ruotare la manopola FUNZIONAMENTO
FRIGORIFERO su un valore medio. Dopo qualche
ora sarà possibile inserire alimenti nel frigorifero.
4. Ruotare la manopola FUNZIONAMENTO
CONGELATORE su un valore medio e premere il tasto
SUPER FREEZE (congelamento rapido): si accenderà la
spia gialla SUPER FREEZE. Essa si spegnerà quando il
congelatore avrà raggiunto la temperatura ottimale: a
quel punto sarà possibile inserire gli alimenti.
vedi Installazione
.
).
Sistema di raffreddamento
Surround No Frost
Il sistema elettronico di
raffreddamento Surround
No Frost è riconoscibile
dalla presenza di celle
d’aerazione presenti
sulla parete superiore
del vano frigo. Il sistema
Surround No Frost
consente, grazie alla
presenza di numerose
celle d’aerazione, di
ottenere una circolazione costante dell’aria e rendere
uniforme la temperatura presente all’interno del
frigorifero mediante un’omogenea ventilazione del vano.
Il No Frost gestisce un flusso continuo di aria fredda
che raccoglie l’umidità e impedisce la formazione di
ghiaccio e brina: nel vano frigorifero mantiene il giusto
livello di umidità e, grazie all’assenza di brina,
preserva le qualità originarie degli alimenti; nel vano
congelatore evita la formazione di ghiaccio rendendo
superflue le operazioni di sbrinamento ed evitando che
gli alimenti si attacchino tra loro.Non mettere alimenti
o contenitori a diretto contatto con la parete
refrigerante posteriore, per non ostruire i fori di
aerazione e facilitare la formazione di condensa.
Chiudere le bottiglie e avvolgere gli alimenti.
Ever Fresh
L'Ever Fresh consente di
eliminare l'aria dagli appositi
contenitori in dotazione al
frigorifero. Questo consente di
prolungare i tempi di
conservazione degli alimenti
mantenendo intatti l'aspetto, le
caratteristiche organolettiche e
nutrizionali ed il gusto dei vostri cibi.
AlimenticondizioniEVER
Piatti cucinati in genere2 giorni10 giorni
Primo piatto pronto2 giorni10 giorni
Pesce fresco2-3 giorni4-5 giorni
Carne fresca cruda3 giorni9 giorni
Formaggio a pasta dura15 giorni60 giorni
Verdura cruda5 giorni21 giorni
Frutta fresca10 giorni21 giorni
Biscotti secchi180 giorni365 giorni
Dolci con crema2 giorni10 giorni
Altri dolci5 giorni20 giorni
La presente tabella è indicativa ed é riferita alla
*
conservazione in frigorifero a temperature comprese
tra 3°C e 5°C. La durata degli alimenti dipende
comunque dalla freschezza iniziale dei prodotti, dalle
modalità di preparazione, di conservazione e dal
corretto utilizzo dell'Ever Fresh.
! L'Ever Fresh deve essere sempre utilizzato tenendo
conto delle caratteristiche di deperibilità degli alimenti
che vengono riposti all'interno dei suoi contenitori e
della loro data di scadenza. La ripetuta conservazione
degli alimenti sottovuoto non consente di modificare
queste caratteristiche.
! Per il funzionamento del sistema Ever Fresh utilizzare
solo i contenitori presenti nel prodotto da voi
acquistato. Non impiegare contenitori diversi.
Sistema Ever Fresh
Il sistema Ever Fresh viene attivato e disattivato
tramite un pulsante interno presente sul ripiano del
frigorifero, un tasto esterno sul pannello di controllo ed
una manopola presente sul coperchio dei contenitori.
Attivare e disattivare l'Ever Fresh
1. Riempire il contenitore. Accertarsi che gli alimenti
posti al suo interno ne assicurino la corretta chiusura.
InCon
normaliFRESH
*
I
5
2. Applicare il coperchio sul contenitore.
I
U
U
C
M
A
V
O
T
O
U
A
V
3. Chiudere le maniglie poste ai
lati del contenitore ed avvitare
completamente la manopola
presente sul suo coperchio
(posizione CLOSE).
O
T
N
R
E
E
P
P
A
O
C
H
C
I
L
U
O
S
S
O
Successivamente, girando in
E
senso antiorario, posizionare la
manopola su VACUUM
figura A).
B
4. Premere il pulsante interno
1
presente sul ripiano e
posizionare il recipiente nella
postazione centrale
2
B).
(vedi
(vedi figura
E
della valvola
(vedi figura E)
.
! Il coperchio dei contenitori é
dotato di una valvola di forma
circolare. La valvola
posizionata in basso
(figura D)
indica l'assenza di aria
all'interno dei contenitori. La
valvola posizionata in alto
(figura E)
indica la presenza di aria all'interno dei
contenitori.
! Se dopo aver creato il vuoto (istruzioni 1-9) la valvola
torna in alto
(vedi figura E)
prima di tre giorni,
verificare la correttezza della chiusura e/o l'integrità
del contenitore. Verificare, inoltre, lo stato di
conservazione dei cibi prima di ripetere le operazioni
per conservarli sottovuoto.
5. Bloccare il contenitore tirando
C
il pulsante interno presente sul
ripiano (
vedi figura C
).
6. Attivare la funzione Ever
Fresh tramite l'apposito tasto
presente sul pannello di
controllo (si accende spia Ever
Fresh). Il sistema impiega circa
1 minuto per aspirare l’aria dai
contenitori. Questa fase è accompagnata da una
rumorosità dovuta al normale funzionamento dell’Ever
Fresh.
7. Una volta che la fase di aspirazione dell’aria è
completa, la spia Ever Fresh si spegne
automaticamente.
8. Sbloccare il contenitore premendo il pulsante
interno presente sul ripiano.
9. Estrarre il contenitore e
D
ruotare, girando in senso orario,
la manopola sulla posizione
CLOSE al fine di prevenirne
l'apertura accidentale
figura A)
. L'assenza di aria
(vedi
all'interno dei contenitori é
indicata dalla valvola
posizionata in basso
(vedi
figura D).
10. Per aprire il contenitore, ruotare girando in senso
antiorario la manopola sulla posizione OPEN
figura A)
: ciò permetterà l'ingresso dell'aria nel
(vedi
contenitore e la sua apertura. L'ingresso dell'aria nei
contenitori verrà segnalata dal movimento verso l'alto
! In caso di malfunzionamenti, se la pompa rimane
attiva per un tempo eccessivo rispetto al normale,
viene disattivata la funzione Ever Fresh, inizia a
lampeggiare la spia Ever Fresh. Il malfunzionamento
sarà anche segnalato da un allarme sonoro.
Per uscire dalla condizione di allarme e ripristinare il
corretto funzionamento della funzione EVER FRESH,
dopo aver controllato lo stato del sistema ed il
posizionamento dei contenitori, occorre premere il
tasto relativo sul pannello di controllo; in questo modo
si spegnerà il led Ever Fresh, e sarà possibile
riattivare la funzione. La funzione Ever Fresh viene
disattivata in condizione di OFF del vano frigorifero.
Utilizzare al meglio l'Ever Fresh
Qui di seguito potrete trovare alcune norme di corretto
utilizzo relative agli alimenti ed al sistema Ever Fresh.
Contenitori Ever Fresh
• Non lavare il coperchio dei contenitori in
lavastoviglie.
• Nel caso in cui vengano conservati all'interno dei
contenitori liquidi di qualsiasi genere, rispettare il
livello massimo indicato sugli stessi. L'aspirazione di
liquidi potrebbe infatti danneggiare la pompa dell'Ever
Fresh.
• L'apertura ripetuta dei contenitori sottovuoto può
alterare le condizioni di conservazione degli alimenti.
• Prima dell'utilizzo assicurarsi che i contenitori non
presentino danni visibili in nessuna delle loro componenti.
• La valvola dei contenitori é dotata di un sistema di
sicurezza. Se dopo aver creato il vuoto la valvola
torna in alto prima di tre giorni, sarà necessario
verificare la correttezza della chiusura e/o l'integrità
del contenitore. Verificare, inoltre, lo stato di
6
conservazione dei cibi prima di ripetere le operazioni
per conservarli sottovuoto. Vedi
l'Ever Fresh
.
Attivare e Disattivare
• Gli alimenti possono essere messi a contatto diretto
con il contenitore.
• Non utilizzare i contenitori per nessun tipo di cottura
(microonde, forno, su fiamma, su piastra ecc.).
• Non mettere i contenitori nel congelatore.
Conservazione alimenti sottovuoto
• Tutti gli alimenti preconfezionati conservati
sottovuoto devono comunque essere consumati entro
la data di scadenza presente sulla loro confezione.
• Conservare ripetutamente gli stessi alimenti
sottovuoto non modifica le naturali caratteristiche di
deperibilità degli stessi.
• Non conservare sottovuoto alimenti scongelati, se
non dopo cottura.
• Gli alimenti da conservare devono essere stati
preparati di fresco (macinati, affettati, mondati, cotti)
ed essere integri.
• Gli alimenti deperibili, anche se conservati sottovuoto,
devono essere comunque riposti in frigorifero.
• Gli alimenti cotti devono essere lasciati raffreddare
prima di essere conservati sottovuto.
Ligiene alimentare
I
1. Dopo l’acquisto degli alimenti, eliminare qualsiasi tipo
di confezione esterna in carta/cartone o altri involucri,
che potrebbero introdurre nel frigo batteri o sporcizia.
2. Proteggere gli alimenti, (in particolare quelli facilmente
deperibili e quelli che emanano un forte aroma), in
modo da evitate il contatto tra essi, eliminando in
questo modo sia la possibilità di contaminazione di
germi/batteri, che la diffusione di particolari odori
all’interno del frigo
3. Riporre i cibi in modo che l’aria possa circolare
liberamente tra essi
4. Tenere pulito l’interno del frigo, facendo attenzione a
non utilizzare prodotti ossidanti o abrasivi
5. Togliere gli alimenti dal frigo una volta superata la
durata massima di conservazione
6. Per una buona conservazione, i cibi facilmente
deperbili ( formaggi molli, pesce crudo, carne, etc…)
vanno posizionati nella zona più fredda, cioè quella
sopra le verduriere, dove si trova l’indicatore della
temperatura
Indicatore TEMPERATURA*: per individuare la zona
più fredda del frigorifero.
Utilizzare al meglio il frigorifero
• Per regolare la temperatura utilizzare la manopola
FUNZIONAMENTO FRIGORIFERO (
• Inserire soltanto alimenti freddi o appena tiepidi,
non caldi (
vedi Precauzioni e consigli
• Ricordarsi che gli alimenti cotti non si mantengono
più a lungo di quelli crudi.
• Non inserire liquidi in recipienti scoperti:
provocherebbero un aumento di umidità con
conseguente formazione di condensa.
RIPIANI: pieni o a griglia.
Sono estraibili e regolabili in
1
altezza grazie alle apposite
guide (
vedi figura
l’inserimento di contenitori
2
o alimenti di notevole
dimensione. Per regolare
l’altezza non è necessario
estrarre completamente il
ripiano.
vedi Descrizione
).
), per
1. Controllare che sull’indicatore risulti ben evidente
OK (
vedi figura
).
).
vert
noir
consulter la notice
2. Se non compare la scritta OK significa che la
temperatura è troppo elevata: regolare la manopola
FUNZIONAMENTO FRIGORIFERO su una posizione
più alta (più freddo) e attendere circa 10 h finché la
temperatura si sia stabilizzata.
3. Controllare nuovamente l’indicatore: se necessario,
procedere con una nuova regolazione. Se si sono
introdotte grosse quantità di alimenti o si è aperta
frequentemente la porta del frigorifero, è normale che
l’indicatore non segni OK. Attendere almeno 10 h
prima di regolare la manopola FUNZIONAMENTO
FRIGORIFERO su una posizione più alta.
Presente solo in alcuni modelli.
*
7
Utilizzare al meglio il congelatore
I
• Per regolare la temperatura utilizzare
la manopola FUNZIONAMENTO CONGELATORE
vedi Descrizione
(
• Non ricongelare alimenti che stanno per scongelare
o scongelati; tali alimenti devono essere cotti per
essere consumati (entro 24 ore).
• Gli alimenti freschi da congelare non devono
essere posti a contatto con quelli già congelati;
vanno sistemati nel vano superiore CONGELAMENTO
e CONSERVAZIONE dove la temperatura scende
sotto i -18°C e garantisce una buona velocità di
congelamento.
! Per evitare di ostacolare la circolazione dell’aria
all’interno del congelatore, si raccomanda di non
ostruire con cibi o contenitori i fori di areazione.
• Non mettere nel congelatore bottiglie di vetro
contenenti liquidi, tappate o chiuse ermeticamente,
perché potrebbero rompersi.
• La quantità massima giornaliera di alimenti da
congelare è indicata sulla targhetta caratteristiche,
posta nel vano frigorifero in basso a sinistra
(esempio: Kg/24h 4).
• Per congelare (se il congelatore è già in funzione):
premere il tasto SUPER FREEZE (congelamento
rapido) (accensione della relativa spia gialla),
introdurre gli alimenti e chiudere la porta. La
funzione si disattiva automaticamente trascorse 24
ore o raggiunte le temperature ottimali (spia
spenta).
).
3. Ruotare la bacinella di 90°: l’acqua riempie le forme per
il principio dei vasi comunicanti (
vedi figura
).
4. Chiudere il foro con il coperchio in dotazione e riporre la
bacinella, inserendo la parte superiore nell’apposita
sede e facendola ricadere.
5. Quando il ghiaccio sarà formato (tempo minimo circa 8
ore) battere la bacinella su una superficie dura e
bagnarne l’esterno per far staccare i ghiaccioli; farli poi
uscire dal foro.
MAX
WATER LEVEL
WATER LEVEL
MAX
WATER LEVEL
MAX
! Durante il congelamento evitare di aprire la porta.
! In caso di interruzione di corrente o di guasto,
non aprire la porta del congelatore: in questo modo
congelati e surgelati si conserveranno senza
alterazioni per circa 9-14 ore.
Bacinella ghiaccio Ice
Care.
Il fatto di essere poste sulla parte superiore dei
cassetti riposti nel vano freezer assicura una
maggiorepulizia: (il ghiaccio non viene più a contatto
con gli alimenti) ed ergonomia (non si sgocciola in
fase di caricamento).
1. Estrarre la bacinella spingendola verso l’alto.
Verificare che la bacinella sia completamente
vuota e riempirla d’acqua attraverso l’apposito foro.
2. Fare attenzione a non superare il livello indicato
(MAX WATER LEVEL). Troppa acqua ostacola la
fuoriuscita dei ghiaccioli (se succede, attendere
che il ghiaccio si sciolga e svuotare la bacinella).
8
Manutenzione e cura
Escludere la corrente elettrica
Durante i lavori di pulizia e manutenzione è necessario
isolare l’apparecchio dalla rete di alimentazione:
1. posizionare la manopola FUNZIONAMENTO
CONGELATORE su
2. staccare la spina dalla presa.
! Se non si segue questa procedura può scattare
l’allarme: esso non è sintomo di anomalia. Per
ripristinare il normale funzionamento è sufficiente
posizionare la manopola FUNZIONAMENTO
CONGELATORE sul valore desiderato. Per isolare
l’apparecchio procedere seguendo i punti 1 e 2.
;
Pulire lapparecchio
• Le parti esterne, le parti interne e le guarnizioni in
gomma possono essere pulite con una spugnetta
imbevuta di acqua tiepida e bicarbonato di sodio o
sapone neutro. Non usare solventi, abrasivi,
candeggina o ammoniaca.
• Gli accessori estraibili possono essere messi a
bagno in acqua calda e sapone o detersivo per
piatti. Sciacquarli e asciugarli con cura.
Funzione holiday
Se si parte per un periodo di vacanza non è
necessario spegnere l’apparecchio perché è dotato
di una funzione che permette, con bassi consumi
elettrici, di mantenere la temperatura del vano
frigorifero intorno ai 12°C (per proteggere dal caldo
trucchi e cosmetici); la temperatura del congelatore
va impostata sul minimo (1), indispensabile per la
conservazione degli alimenti.
Per attivare la funzione:
impostare la manopola FUNZIONAMENTO
FRIGORIFERO su
Un doppio breve segnale acustico ne conferma
l’attivazione; la disattivazione è indicata da un segnale
acustico singolo.
.
Sostituire la lampadina
Per sostituire la lampadina di illuminazione del vano
frigorifero, staccare la spina dalla presa di corrente.
Seguire le istruzioni riportate qui sotto.
Accedere alla lampada togliendo la protezione come
indicato in figura. Sostituirla con una di potenza
analoga a quella indicata sulla protezione (10 W).
I
• Il retro dell’apparecchio tende a coprirsi di polvere,
che può essere eliminata utilizzando con
delicatezza, dopo aver spento l'apparecchio e
staccato la presa di corrente, la bocchetta lunga
dell’aspirapolvere, impostato su una potenza
media.
Evitare muffe e cattivi odori
• L’apparecchio è fabbricato con materiali igienici
che non trasmettono odori. Per mantenere questa
caratteristica è necessario che i cibi vengano
sempre protetti e chiusi bene. Ciò eviterà anche
la formazione di macchie.
• Nel caso si voglia spegnere l’apparecchio per un
lungo periodo, pulire l’interno e lasciare le porte
aperte.
9
Precauzioni e consigli
! L’apparecchio è stato progettato e costruito
I
in conformità alle norme internazionali di sicurezza.
Queste avvertenze sono fornite per ragioni
di sicurezza e devono essere lette attentamente.
Questa apparecchiatura è conforme
alle seguenti Direttive Comunitarie:
- 73/23/CEE del 19/02/73 (Bassa Tensione)
e successive modificazioni;
- 89/336/CEE del 03/05/89 (Compatibilità
Elettromagnetica) e successive modificazioni.
- 2002/96/CE..
Sicurezza generale
• L’apparecchio è stato concepito per un uso di tipo
non professionale all’interno dell’abitazione.
• L’apparecchio deve essere usato per conservare
e congelare cibi, solo da persone adulte e secondo
le istruzioni riportate in questo libretto.
• L’apparecchio non va installato all’aperto,
nemmeno se lo spazio è riparato, perché è molto
pericoloso lasciarlo esposto a pioggia e temporali.
• Non toccare l’apparecchio a piedi nudi o con le
mani o i piedi bagnati o umidi.
• Non toccare le parti interne raffreddanti:
c’è pericolo di ustionarsi o ferirsi.
Smaltimento
• Smaltimento del materiale di imballaggio: attenersi
alle norme locali, così gli imballaggi potranno
essere riutilizzati.
• La direttiva Europea 2002/96/CE sui rifiuti di
apparecchiature elettriche ed elettroniche (RAEE),
prevede che gli elettrodomestici non debbano
essere smaltiti nel normale flusso dei rifiuti solidi
urbani. Gli apparecchi dismessi devono essere
raccolti separatamente per ottimizzare il tasso di
recupero e riciclaggio dei materiali che li
compongono ed impedire potenziali danni per la
salute e l’ambiente. Il simbolo del cestino barrato è
riportato su tutti i prodotti per ricordare gli obblighi
di raccolta separata.
Per ulteriori informazioni, sulla corretta dismissione
degli elettrodomestici, i detentori potranno rivolgersi
al servizio pubblico preposto o ai rivenditori.
Risparmiare e rispettare lambiente
• Installare l’apparecchio in un ambiente fresco e ben
aerato, proteggerlo dall’esposizione diretta ai raggi
solari, non disporlo vicino a fonti di calore.
• Per introdurre o estrarre gli alimenti, aprire le porte
dell’apparecchio il più brevemente possibile.
Ogni apertura delle porte causa un notevole
dispendio di energia.
• Non staccare la spina dalla presa della corrente
tirando il cavo, bensì afferrando la spina.
• È necessario staccare la spina dalla presa prima di
effettuare operazioni di pulizia e manutenzione. Non
è sufficiente portare le manopole per la regolazione
della temperatura sulla posizione OFF
(apparecchio spento) per eliminare ogni contatto
elettrico.
• In caso di guasto, in nessun caso accedere ai
meccanismi interni per tentare una riparazione.
• Non usare, all’interno dei vani, dispositivi o utensili
diversi dal raschietto fornito in dotazione.
• Non mettere in bocca cubetti appena estratti dal
congelatore.
• Non permettere ai bambini di giocare con
l’apparecchio. In nessun caso devono sedersi sui
cassetti o appendersi alla porta.
• Gli imballaggi non sono giocattoli per bambini.
• Non riempire con troppi alimenti l’apparecchio:
per una buona conservazione, il freddo deve
poter circolare liberamente. Se si impedisce la
circolazione, il compressore lavorerà continuamente.
• Non introdurre alimenti caldi: alzerebbero la
temperatura interna costringendo il compressore a
un grosso lavoro, con grande spreco di energia
elettrica.
• Sbrinare l’apparecchio qualora si formasse del
ghiaccio (
di ghiaccio rende più difficile la cessione di freddo
agli alimenti e fa aumentare il consumo di energia.
• Mantenere efficienti e pulite le guarnizioni, in modo
che aderiscano bene alle porte e non lascino uscire
il freddo (
vedi Manutenzione
vedi Manutenzione
); uno spesso strato
).
10
Anomalie e rimedi
Può accadere che l’apparecchio non funzioni. Prima di telefonare all’Assistenza (
che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco.
Anomalie:
La spia verde ALIMENTAZIONE
non si accende.
Il motore non parte.
a) Suona lallarme.
b) Suona lallarme e lampeggiano
le due spie gialle.
c) Suona lallarme e lampeggiano
le due spie gialle e quella verde.
Riscaldamento
eccessivo
+ segnale acustico
Riscaldamento
pericoloso
+ segnale acustico
La spia verde ALIMENTAZIONE
lampeggia
Possibili cause / Soluzione:
• La spina non è inserita nella presa della corrente o non abbastanza
da fare contatto, oppure in casa non c’è corrente.
• L’apparecchio è dotato di un controllo salvamotore (
utilizzo
).
a) La porta del frigorifero è rimasta aperta per più di due minuti.
Il segnale acustico cessa alla chiusura della porta. Oppure non si è
seguita la corretta procedura di spegnimento (
b) L’apparecchio segnala un riscaldamento eccessivo del congelatore.
Si consiglia di verificare lo stato degli alimenti: potrebbe essere
necessario gettarli.
c) L’apparecchio segnala un riscaldamento pericoloso del congelatore:
gli alimenti devono essere gettati.
b/c) In entrambi i casi il congelatore si manterrà a una temperatura
intorno a 0°C per non far ricongelare gli alimenti.
Per spegnere il segnale acustico: aprire e chiudere la porta
del frigorifero. Per ripristinare il funzionamento normale: portare
la manopola FUNZIONAMENTO CONGELATORE sulla posizione
(spento) e riaccendere l’apparecchio.
• L’apparecchio non funzione correttamente. Chiamare l’Assistenta
Tecnica
vedi Assistenza
), controllare
vedi Avvio e
vedi Manutenzione
I
).
Il frigorifero e il congelatore
raffreddano poco.
Nel frigorifero gli alimenti
si gelano.
Il motore funziona di continuo.
Lapparecchio emette
molto rumore.
La temperatura di alcune parti
esterne del frigorifero è elevata.
• Le porte non chiudono bene o le guarnizioni sono rovinate.
• Le porte vengono aperte molto spesso.
• Le manopole FUNZIONAMENTO non sono in posizione corretta
(
vedi Descrizione
• Il frigorifero o il congelatore sono stati riempiti eccessivamente.
• La manopola FUNZIONAMENTO FRIGORIFERO non è in posizione
corretta (
• Gli alimenti sono a contatto con la parete posteriore.
• È stato premuto il tasto SUPER FREEZE (congelamento rapido): la
spia gialla SUPER FREEZE è accesa (
• La porta non è ben chiusa o viene aperta di continuo.
• La temperatura dell’ambiente esterno è molto alta.
• L’apparecchio non è stato installato ben in piano (
• L’apparecchio è stato installato tra mobili o oggetti che vibrano
ed emettono rumori.
• Il gas refrigerante interno produce un leggero rumore anche quando
il compressore è fermo: non è un difetto, è normale.
• Le temperature elevate sono necessarie per evitare la formazioni di
condensa in particolari zone del prodotto
vedi Descrizione
).
).
vedi Desc.
).
vedi Installazione).
11
Assistenza
195052809.00
06/2005 - Xerox Business Services
I
•
Verificare se l’anomalia può essere risolta autonomamente (
vedi Anomalie e Rimedi
).
• In caso negativo, contattare il Numero Unico Nazionale 199.199.199.
Prima di contattare lAssistenza:
modello
numero di serie
Comunicare:
• il tipo di anomalia
• il modello della macchina (Mod.)
• il numero di serie (S/N)
Queste informazioni si trovano
sulla targhetta caratteristiche posta
nel vano frigorifero in basso a sinistra.
RG 2330
Mod.
220 - 240 V-50 Hz 150 W
340
Total
Gross
Bruto
Brut
Compr.
R 134 a
Syst.
kg 0,090
Kompr.
Made in Italy 13918
Gross
Bruto
Brut
75
Test
P.S-I.
TI
Net
Util
Utile
Pressure
HIGH-235
LOW 140
93139180000 S/N 704211801
Cod.
Gross
Bruto
Brut
W
Fuse
A
Freez. Capac
Poder de Cong
kg/24 h
4,0
Max 15 w
Class
Clase
Classe
N
Assistenza Attiva 7 giorni su 7
Se nasce il bisogno di assistenza o manutenzione basta chiamare il Numero Unico Nazionale 199.199.199* .
Un operatore sarà a tua completa disposizione per fissare un appuntamento con un tecnico del Centro
Assistenza Autrorizzato più vicino a casa tua.
È attivo 7 giorni su 7, sabato e domenica compresi, e non lascia mai inascoltata una richiesta.
12
*Al costo di 14,25 centesimi di Euro al minuto(iva inclusa) dal Lun. al Ven. dalle 08:00 alle 18:30, il Sab. dalle 08:00
alle 13:00 e di 5,58 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 18:30 alle 08:00, il Sab. dalle 13:00
alle 08:00 e i giorni festivi, per chi chiama da telefono fisso.
Per chi chiama da radiomobile le tariffe sono legate al piano tariffario dell’operatore telefonico utilizzato.
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
GBIF
Italiano, 1Français, 25
English,13
PE
Portuges, 49Espanol, 37
PL
Polski, 61
MBL 1811 IS
MBL 2023 IS
Contents
GB
Installation, 14
Positioning and connection
Reversible doors
Description of the appliance, 15-16
Control panel
Overall view
Start-up and use, 17-20
Starting the appliance
Chiller system
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 21
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Replacing the light bulb
Precautions and tips, 22
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 23
Assistance, 24
Installation
GB
! Before placing your new appliance into operation
please read these operating instructions carefully. They
contain important information for safe use, for
installation and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the rear fan grills. The compressor
and condenser give off heat and require good
ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part
of the appliance and any furniture above it, and at least
5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of
heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers
supplied in the installation kit, following the
instructions provided.
Reversible doors
1
2
3
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the
refrigerator by tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully
place it vertically and wait at least 3 hours before
connecting it to the electricity mains. Before inserting
the plug into the electrical socket ensure the following:
• The appliance is earthed and the plug is compliant
with the law.
• The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located
on the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
• The socket is compatible with the plug of the
appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (
Do not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should
these safety measures not be observed.
see Assistance
).
4
5
∅3
mm
14
Description of the
appliance
Control panel
REFRIGERATOR
OPERATION
Knob
EVER FRESH
Indicator light
EVER FRESH
Button
POWER
Indicator light
SUPER FREEZE
Indicator light
GB
FREEZER
OPERATION
Knob
SUPER FREEZE
Button
• REFRIGERATOR OPERATION Knob
to regulate the temperature of the refrigerator
compartment.
is the optimal temperature for energy saving
levels.
is the holiday function (
care
).
OFF switches the refrigerator off.
• The EVER FRESH button (vacuum storage) enables
fresh foods to be stored while preserving its original
appearance, taste and nutritional characteristics.
• Yellow EVER FRESH indicator light:
illuminates when the EVER FRESH button is pressed.
• POWER Indicator light illuminates when the
appliance is connected to the electricity network.
see Maintenance and
• SUPER FREEZE button (rapid freezing) to freeze fresh
food. When it is pressed, the SUPER FREEZE indicator
light illuminates (
• SUPER FREEZE Yellow indicator light (rapid
freezing) illuminates when the SUPER FREEZE
button is pressed.
• FREEZER OPERATION Knob
to regulate the temperature of the freezer
compartment.
is the optimal temperature for energy saving
levels.
switches the appliance off, including the
refrigerator.
! The indicator lights are also used to indicate an
unusual temperature increase in the freezer
compartment (
see Start-up and use
see Troubleshooting
).
).
15
Description of the
appliance
Overall view
GB
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not
directly represent the appliance purchased. For more complex features, consult the following pages.
Control panel
LAMP
see Maintenance
(
)
Removable lidded
shelf with EGG TRAY
SHELVES
EVER FRESH
FRUIT and
VEGETABLE bin
ICE CARE ice tray
FREEZER and
STORAGE
compartment
ICE CARE ice tray
CAN RACK
Removable multipurpose
SHELVES
•
BOTTLE shelf
*
STORAGE
compartment
Levelling FEET
Varies by number and/or position.
Available only on certain models.
*
16
Start-up and use
Starting the appliance
! Before starting the appliance, follow the
installation instructions (
! Before connecting the appliance, clean the
compartments and accessories well with lukewarm
water and bicarbonate.
! The appliance comes with a motor protection control
system which makes the compressor start
approximately 8 minutes after being switched on. The
compressor also starts each time the power supply is
cut off whether voluntarily or involuntarily (blackout).
1. Set the FREEZER OPERATION knob on
2. Insert the plug into the socket and ensure that the
green POWER indicator light illuminates.
3. Turn the REFRIGERATOR OPERATION knob to an
average value. After a few hours you will be able to
put food in the refrigerator.
4. Turn the FREEZER OPERATION knob to an average
value and press the SUPER FREEZE button (rapid
freezing): the SUPER FREEZE indicator light will
illuminate. Once the refrigerator has reached the
optimal temperature, the indicator light goes out and
you can begin food storage.
see Installation
).
.
Ever Fresh
Ever Fresh eliminates air from
the containers that are supplied
with the refrigerator. This
ensures that food is preserved
for longer periods of time while
preserving its original
appearance, taste and
nutritional characteristics.
In
Food
General cooked dish2 days10 days
Ready-made rice or pasta dish 2 days10 days
Fresh fish2-3 days4-5 days
Fresh raw meat3 days9 days
Hard cheese15 days60 days
Raw vegetables5 days21 days
Fresh fruit10 days21 days
Dry biscuits180 days 365 days
Pastries with cream/custard2 days10 days
Other desserts/pastries5 days20 days
normal
conditions
With
EVER
FRESH*
GB
Chiller system
Surround No Frost
The electronic cooling
system Surround No Frost
is characterised by the
presence of aeration cells
on the upper walls of the
refrigerator compartment.
The Surround No Frost
system, thanks to the
presence of a number of
aeration cells, enables
the constant circulation of
air inside the compartment, while the internal
temperature of the refrigerator is kept even using the
same compartment ventilation system.
The No Frost system circulates cold air continuously to
collect humidity and prevent ice and frost formation. The
system maintains an optimal humidity level in the
compartment, preserving the original quality of the food,
preventing the food from sticking together and making
defrosting a thing of the past.Do not block the aeration
cells by placing food or containers in direct contact with
the refrigerating back panel. Close bottles and wrap
food tightly.
* The above table is indicative and refers to food
storage in the refrigerator at temperatures ranging
between 3°C and 5°C. The length of time food lasts for
will, however, depend on the initial freshness of the
products, preparation and storage methods, and
correct use of the Ever Fresh function.
! The food’s tendency to spoil and use-by date must
always be borne in mind when using the Ever Fresh
food storage system. This method of storing food does
not change any of the characteristics of the food.
! Use only the containers that come with the product to
store food in the Ever Fresh system. Do not use any
other type of container.
Ever Fresh system
The Ever Fresh system is activated and deactivated by
means of a button on the refrigerator shelf, an external
button on the contro panel and a knob on the cover of
each container.
Activating and deactivating Ever Fresh
1. Fill the container. Make sure that the food inside
leaves room for the container to be closed properly.
2. Put the lid on the container.
17
GB
U
U
C
M
A
V
O
T
O
U
A
V
3. Close the handles on either
side of the container and turn
the knob on the lid of the
container all the way to the
CLOSE position. Then turn the
O
T
N
R
E
E
P
P
A
O
C
H
C
I
L
U
O
S
S
O
E
knob anticlockwise to the
VACUUM position
(see figure A).
B
4. Press the button on the shelf
and place the container in the
1
central position
(see figure B).
5. Lock the container into
2
C
position by pulling the button on
the shelf
(see figure C)
6. Activate the Ever Fresh
function by pressing the relevant
button on the control panel (the
Ever Fresh indicator light will
illuminate). It takes approximately
1 minute for the system to suck
the air out of the containers. This
stage is accompanied by a noise
that is caused by the normal
operation of the Ever Fresh function.
7. Once the air suction phase has been completed, the
Ever Fresh LED switches off automatically.
8. Unlock the container from its position by pressing the
button on the shelf.
D
9. Take it out of the refrigerator
and turn the knob clockwise to
the CLOSE position to avoid
accidental opening
. The absence of air inside the
A)
container is indicated by the
valve at the bottom
E
10. To open the container, turn
the knob anticlockwise to the
OPEN position
(see figure A)
this will allow air to enter the
container and make it easy to
open. The valve will move
upwards as air enters the
container
(see figure E)
! The lid of the container is provided with a circular
valve. When the valve is low
(figure D)
there is no air
inside the container. When the valve is high
air is present inside the container.
.
(see figure
(see figure D).
:
.
(figure E)
! If, after you have created a vacuum (instructions
1-9), the valve moves upward
(see figure E)
within three
days, check the lid has been put on the container
properly and/or that the container is intact. Check the
storage status of the food before repeating the vacuum
storage operation.
! If the system does not work as it should or if the pump
remains in operation for greater amount of time than is
normal, the Ever Fresh function is deactivated and the
Ever Fresh LED begins to flash. Malfunction is also
signalled by an alarm buzzer.
To exit the alarm status and restore normal operation of
the EVER FRESH function, after checking the status of
the system and the position of the containers, press the
corresponding button on the display to switch off the
Ever Fresh LED. It will now be possible to reactivate the
function. The Ever Fresh function is deactivated when
the refrigerator compartment is OFF.
Using Ever Fresh to its full potential
The following information is a guide on how to get the
best from the Ever Fresh system and the food it stores.
Ever Fresh containers
• Do not clean the lids in a dishwasher.
• The maximum fill level marked on the container must
be respected when storing liquids of any kind.
Vacuuming actual liquid from the container may
damage the Ever Fresh pump.
• Repeated opening of the vacuumed containers may
disturb the storage conditions of the food inside.
• Before using the system, make sure there is no visible
damage on any part of the container.
• The container valve has a built-in security system. If,
after you have created a vacuum, the valve moves
upward within three days, check the lid has been put
on the container properly and/or that the container is
intact. Check the storage status of the food before
repeating the vacuum storage operation. See
and deactivating Ever Fresh
.
• The containers were designed to come into direct
contact with food.
• Do not use the containers for any type of cooking (in
the microwave or oven, on an electric plate, over a
flame, etc.).
• Do not put the containers in the freezer.
Vacuum storage
• Pre-packed foods stored using the vacuum system
must still be consumed before the use-by date.
• Repeatedly storing these vacuum-packed foods does
not change their natural tendency to spoil.
Activating
18
• Do not store defrosted foods using the vacuum
system unless they have been cooked already.
• Stored food should be prepared while fresh
(chopped, sliced, peeled, cooked) and should be in
perfect condition.
• Perishable foods stored using the vacuum system
must still be stored inside the refrigerator.
• Cooked foods must be left to cool before being stored
using the vacuum system.
Using the refrigerator to its full potential
• Use the REFRIGERATOR OPERATION knob to adjust
the temperature (
see Description
• Place only cold or lukewarm foods in the compartment,
not hot foods (
see Precautions and tips
• Remember that cooked foods do not last longer than
raw foods.
• Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.
SHELVES: the shelves are
1
removable and their height may
be adjusted thanks to special
2
rails (
easy storage of large containers
and bulky food. The height may
be adjusted without removing
the shelf completely.
).
).
see diagram
), allowing
TEMPERATURE Indicator light*: to identify the coldest
area in the refrigerator.
1. Check that OK appears clearly on the indicator light
see diagram
(
).
vert
noir
consulter la notice
2. If the word “OK” does not appear it means that the
temperature is too high: adjust the REFRIGERATOR
OPERATION knob to a higher position (colder) and
wait approximately 10 hours until the temperature has
been stabilised.
3. Check the indicator light again: if necessary, readjust
it following the initial process. If large quantities of
food have been added or if the refrigerator door has
been opened frequently, it is normal for the indicator
not to show OK. Wait at least 10 hours before
adjusting the REFRIGERATOR OPERATION knob to a
higher setting.
GB
Food hygiene
1. Once you have bought your food, remove all
external packaging made of paper/cardboard or
other wrappers, which could introduce bacteria or
dirt inside your refrigerator.
2. Protect the food, (especially easily perishable items
and those that have a strong smell), in order to avoid
contact between them, thereby removing both the
possibility of germ/bacteria contamination as well as
the diffusion of strong odours inside the fridge.
3. Store all food in such a way as to ensure air can
circulate freely between different items.
4. Keep the inside of your fridge clean, taking care not
to use oxidiser or abrasive products.
5. Remove all food past its expiry date from the
refrigerator.
6. For the correct preservation of food, all easily
perishable items (soft cheeses, raw fish, meat, etc.)
should be stored in the coldest zone of the fridge
compartment, i.e. just above the salad crisper where
the temperature indicator is situated.
Available only on certain models.
*
19
Using the freezer to its full potential
WATER LEVEL
MAX
WATER LEVEL
MAX
WATER LEVEL
MAX
GB
• Use the FREEZER OPERATION knob to adjust the
temperature (
see Description
• Do not re-freeze food that is defrosting or that has already
been defrosted. These foods must be cooked and eaten
(within 24 hours).
• Fresh food that needs to be frozen must not come into
contact with food that has already been defrosted. Fresh
food must be stored in the top FREEZER and STORAGE
compartment where the temperature drops below -18°C
and guarantees rapid freezing.
! to avoid blocking the air circulation inside the freezer
compartment, it is advisable not to obstruct the
ventilation holes with food or containers.
• Do not place glass bottles which contain liquids, and which
are corked or hermetically sealed in the freezer because
they could break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: Kg/24h: 4).
• To freeze (if the freezer is already operating):
press the rapid freezing SUPER FREEZE button
(corresponding yellow indicator light illuminates), insert the
food and close the door. The function is disabled
automatically after 24 hours or when optimal temperatures
have been reached (indicator light goes out);
).
ICE CARE tray
The fact that they are situated on the top part of the
freezer drawers ensures greater cleanliness: the ice no
longer comes into contact with the food placed inside
the freezer compartment; furthermore, the dripping of
the water during filling is avoided (a lid to cover up the
hole after filling with water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to
melt and empty the tray).
3. Turn the tray 90°: due to the connected
compartments each mould fills with water (
diagram
).
see
4. Close the opening with the lid provided and put the
tray back, placing the top part in the corresponding
housing and allowing it to drop in again.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a hard
surface and wet the outside so that the ice cubes
come loose and take them out through the opening.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature inside
the freezer, ensuring that foods are conserved for at least 9
-14 hours.
20
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to
disconnect the appliance from the electricity supply:
1. set the FREEZER OPERATION knob on
2. pull the plug out of the socket
! If this procedure is not followed, the alarm may sound.
This alarm does not indicate a malfunction. To restore
normal operation, it is sufficient to set the FREEZER
OPERATION knob on the desired value. To disconnect
the appliance, follow point 1 and 2.
Cleaning the appliance
• The external and internal parts, as well as the rubber
seals may be cleaned using a sponge that has been
soaked in lukewarm water and bicarbonate of soda
or neutral soap. Do not use solvents, abrasive
products, bleach or ammonia.
• The removable accessories may be soaked in warm
water and soap or dishwashing liquid. Rinse and dry
them carefully.
• The back of the appliance may collect dust which
can be removed by delicately using the hose of a
vacuum cleaner set on medium power. The
appliance must be switched off and the plug must be
pulled out before cleaning the appliance.
Holiday function
To minimise energy usage when on holiday, it is not
necessary to switch the appliance off. The appliance
has a function which allows it to maintain the
temperature of the refrigerator compartment at
approximately 12°C (which can also be used to
conserve make-up and beauty products). The freezer
temperature must be set to the minimum value in order
to preserve the food.
To enable the function: set the REFRIGERATOR
OPERATION knob on
A double acoustic signal informs you when it has been
enabled. A single acoustic signal informs you when it
has been disabled.
Replacing the light bulb
To replace the light bulb in the refrigerator
compartment, pull out the plug from the electrical
socket. Follow the instructions below.
Access the light bulb by removing the cover as
indicated in the diagram.
Replace it with a similar light bulb within the power
range indicated on the cover (15W or 25W).
.
GB
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials
which are odour free. In order to maintain an odour
free refrigerator and to prevent the formation of stains,
food must always be covered or sealed properly.
• If you want to switch the appliance off for an
extended period of time, clean the inside and leave
the doors open.
21
Precautions and tips
! The appliance was designed and manufactured in
GB
compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
This appliance complies with the following
Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and
subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic
Compatibility) and subsequent amendments;
- 2002/96/CE..
General safety
• The appliance was designed for domestic use inside
the home and is not intended for commercial or
industrial use.
• The appliance must be used to store and freeze food
products by adults only and according to the
instructions in this manual.
• The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or
moist hands and feet.
• Do not touch the internal cooling elements:this could
cause skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug
from the mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the
appliance and disconnect it from the electrical supply.
It is not sufficient to set the temperature adjustment
knobs on OFF (appliance off) to eliminate all electrical
contact.
• In the case of a malfunction, under no circumstances
should you attempt to repair the appliance yourself.
Repairs carried out by inexperienced persons may
cause injury or further malfunctioning of the appliance.
• Do not use devices or tools other than the special
scraper provided inside the compartments.
Disposal
• Observe local environmental standards when
disposing packaging material for recycling
purposes.
• The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be
disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected separately
in order to optimise the recovery and recycling of the
materials they contain and reduce the impact on
human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the
appliance it must be separately collected.
Consumers should contact their local authority or
retailer for information concerning the correct
disposal of their old appliance.
Respecting and conserving the
environment
• Install the appliance in a fresh and well-ventilated
room. Ensure that it is protected from direct sunlight
and do not place it near heat sources.
• Try to avoid keeping the door open for long periods
or opening the door too frequently in order to
conserve energy.
• Do not fill the appliance with too much food:
cold air must circulate freely for food to be preserved
properly. If circulation is impeded, the compressor
will work continuously.
• Do not place hot food directly into the refrigerator.
The internal temperature will increase and force the
compressor to work harder and will consume more
energy.
• Defrost the appliance if ice forms (
A thick layer of ice makes cold transference to food
products more difficult and results in increased
energy consumption.
see Maintenance
).
• Do not put ice cubes taken directly from the freezer into
your mouth.
• Do not allow children to tamper with the controls or play
with the appliance. Under no circumstance should they
be allowed to sit on the bins or to hang from the door.
• Keep packaging material out of the reach of children! It
can become a choking or suffocation hazard.
22
• Regularly check the door seals and wipe clean to
ensure they are free of debris and to prevent cold air
from escaping (
see Maintenance
).
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.