HOTPOINT HMCB 505011 UK Extended Technical Drawing

		4	18
50	200cm	2
			57
		1770

1776-1786

50

560	-570

550

200cm	2

540	545

57

776

75	898
1770	825

34

41

	HMCB 505011 UK		12NC/Fx: F161857						GTIN (EAN) code:
									5054645618576
	DIMENSION		MEASURE				DIMENSION			MEASURE
	WOODEN CABINET - Overall Wooden Cabinet - BI						APPLIANCE
	01.	Height MIN of the tall cabinet Niche, including all required space for installation or ventilation		1776	mm		Overall Appliance
	(HMIN_T)					01.		Height MIN Product, watch the detail drawing for the exact position of the dimension line		1770	mm
	02.	Height MAX of the tall cabinet Niche, including all required space for installation or ventilation		1786	mm		(HMIP)
	(HMAN_T)						02.	Height MAX product, watch the detail drawing for the exact position of the dimension line		1770	mm
	03.	Width MIN of the tall cabinet Niche, including all required space for installation or ventilation		560	mm		(HMAP)
	(WMIN_T)					03.		Width product, watch the detail drawing for the exact position of the dimension line (WP)		540	mm
	04.	Width MAX of the tall cabinet Niche, including all required space for installation or ventilation		570	mm
							04.	Depth product without front, watch the detail drawing for the exact position of the		0	mm
	(WMAN_T)						dimension line (DP)
	05.	Depth of the tall cabinet Niche, including all required space for installation or ventilation (DN_T) 550			mm	05.		Depth product, watch the detail drawing for the exact position of the dimension line (D)		545	mm
	06.	Height MIN of the base cabinet Niche, including all required space for installation or ventilation		0
							06.	Depth MIN plinth return front (DMIPRF)		0	mm
	(HMIN_B)					07.		Depth MAX plinth return front (DMAPRF)		41	mm
	07.	Height MAX of the base cabinet Niche, including all required space for installation or ventilation 0
							08.	Height MIN Plinth return. This dimension is taken by minimum appliance height (HMIPR)		34	mm
	(HMAN_B)
						09.		Height MAX Plinth return. This dimension is taken at minimum appliance height (HMAPR)		34	mm
	08.	Width MIN of the base cabinet Niche, including all required space for installation or ventilation		0
							Door or Drawer
	(WMIN_B)
						10.		Height front. When appliance has more than one front, only the most bottom left front is		825	mm
	09.	Width MAX of the base cabinet Niche, including all required space for installation or ventilation		0
							discribed here (HF)
	(WMAN_B)
							11.	Width front. When appliance has more than one front, only the most bottom left front is		540	mm
	10.	Depth of the base cabinet Niche, including all required space for installation or ventilation		0
							discribed here (WF)
	(DN_B)
						12.		Depth front (DF)		0	mm
	11.	Indicates whether a ventilation opening is needed or not. Default is "N"		Yes
							13.	Maximum depth all protruding elements, e.g. handles, controls (DC)		0	mm
	12.	Appliance can be used as base for other appliances from the same manufacturer. Default is		No
	"N"					14.		Lateral clearance between front edge and most protruding elements which avoid to open a 0			mm
							neighbour front more than 90° (CC)
	WOODEN CABINET - Door – Drawer
							15.	Projection of front in relation to housing of appliance (FPT)		18	mm
	13.	Height MIN Decorative Front, if appliance has more than one front, only the most bottom left		776
	front is described here (HMIF)				mm	16.		Projection of front in relation to bearing area of the appliance. Taken at MIN height of		0	mm
							appliance if adjustable height(FPB)
	14.	Width MIN Decorative Front, if appliance has more than one front, only the most bottom left		560	mm
							17.	Height Product Panel. When product panel is missing, set to 0 (HMAPP)		57	mm
	front is described here (WMIF)
	15.	Weight/Thickness of the decorative bottom front panel of the Kitchen manufacturer needs		No		18.		Lateral projection of front including controls when door is opened totaly. At the side where		0	mm
	(essential)						the hinge is mounted (FPOD)
	16.	Weight MAX of the decorative bottom front panel of the Kitchen manufacturer (WEMAF)		0	kg		19.	Space in front, which is required to guarantee full operability. The most protruding part		0	mm
	17.	Thickness MIN Decorative Front, if appliance has more than one front only the most bottom left 0			mm		gives this dimension (RSF)
	front is described here(TMIF)					20.		Lateral projection of opened front at the side where the hinge is fixed (FPD)		0	mm
	18.	Thickness MAX Decorative Front, if appliance has more than one front only the most bottom		0	mm		21.	Door hinge positiong and tipology		Right-
	left front is described here(TMAF)									changeable
	Additional Fronts (2 doors)					22.		Type of preparation to fix the cover door		Sliding
	19.	Height MIN Decorative Front, when appliance has more than one front, upper front is discribed		0						system
	here (HMIFU)				mm		23.	Maximum angle when door is opened totaly (AOD)		0	°
	20.	Width MIN Decorative Front, when appliance has more than one front, upper front is discribed		0	mm	24.		Maximum thickness of the upper front panel (TUFP)		4	mm
	here (WMIFU)						Additional Fronts (2 doors)
	21.	Weight/Thickness of the decorative upper front panel of the Kitchen manufacturer needs		No		25.		Height front, when appliance has more than one front, upper front is discribed here (HUF)		776	mm
	(essential)
							26.	Width front, when appliance has more than one front, upper front is discribed here (WUF)		540	mm
	22.	Weight MAX of the decorative upper front panel of the Kitchen manufacturer (WEMAFU)		0	kg
						27.		Useful space between the 2 doors, including hinges size (HMAFG)		75	mm
	23.	Thickness MIN Decorative Front, when appliance has more than one front, upper front is		0	mm
							28.	Distance between the bottom of the product and the center line between the fridge doors		898	mm
	discribed here (TMIFU)
							(HFG)
	24.	Thickness MAX Decorative Front, when appliance has more than one front, upper front is		0	mm