Hotpoint E320SKIX Instruction manual

Electrical Cooking Hob

GB

English

E320SKIX

Index

Instructions for use

Installation, 4
Use, 4
Maintenance, 4

Instructions for the installater

Installation, 6
Positioning, 6
Electrical connection, 6

Assistance, 7

THIS APPLIANCE IS CONCEIVED FOR
DOMESTIC USE ONLY. THE MANUFACTURER
SHALL NOT IN ANY WAY BE HELD
RESPONSIBLE FOR WHATEVER INJURIES
OR DAMAGES ARE CAUSED BY INCORRECT
INSTALLATION OR BY UNSUITABLE, WRONG
OR ABSURD USE.

GB

Dear customer,

We thank you and con-gratulate you on your
choice. This new carefully de-signed product,
manu-factured with the highest quality materials,
has been carefully tested to satisfy all your
cooking demands. We would therefore request
you to read and follow these easy instructions
which will allow you to obtain ex-cellent results
right from the start. May we wish you all the
very best with your modern appliance!

THE MANUFACTURER

3

Instructions for use

GB

Installation

All operations relative to installation (electric connection)
should be carried out by skilled personnel in conformity
with the rules in force. As for the specific instructions see
part pertaining to installer.

Use

Electric plates (Fig. 1 - 2 - 3)

Rotate the knob to the position correspondent to the
needs of cooking taking into consideration that to a
higher number a higher heat supply corresponds,
see table “use of electric plates”. “Quick and normal
plates”: clockwise and anticlockwise rotation with
7 fixed position (0÷6). The pilot lamp on indicates
when plate is connected.
Some types of pilot lights will maintain some slight
luminescence even after disconnection. That is quite
normal.

N.B.:

- When one makes use of electric plates, we advise
receptacles with flat bottom having same diameter or
lightly higher than that of the plate;

- avoid overflows of liquid, therefore when boiling
has happened or in any case when liquid is heated,
reduce the heat supply;

- don’t leave the electrical plates on without receptacles
on the top or with void pots and pans;

- at the end of cooking take again the knob to position “0”.

USE OF ELECTRICAL PLATES

quick-normal intensity of heat

1 Weak

2 Gentle

3 Slow

4 Medium

5 Strong

6 Bright

Fig.1

Maintemace

Before every operation it’s necessary to disconnect the
apparatus. To obtain a higher life of the apparatus concerned
it’s indispensable to carry out at regular intervals a carefully
general cleaning bearing in mind the following:

- the s/s and/or enameled parts should be cleaned by

means of suitable not abrasive or corrosive products
(available on the market). Avoid cloride-base products
(bleach, etc.)

- avoid leaving on the top acid or alkaline substances

(vinegar, salt, lemon-juice, etc.)

- the electric plates have to be cleaned by means of a wet

rag and lightly oiled with lubricant when they are still tepid.

DO NOT USE STEAM CLEANERS

Fig.2

4

5

GB

HO5RR - F3 x 1.5

HO5RR - F4 x 0.75

Apparatus class I (type Y): it can be brought near furniture being higher than the work-top

ELECTRIC PLATES

SUPPLY

TYPE

W REGULATION

~ 230 V

• QUICK Ø 145 1500

CLOCKWISE AND ANTICLOCKWISE ROTATION

• QUICK Ø 180 2000

• red point

Fig. 4

Fig. 5

1 - Ø 145
2 - Ø 180

Fig. 3