Page 1
Specifications
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Input Impedance: 500kΩ
Speaker Output: 4-16Ω, self-adaptive
Max. Output Power (19V):
75 Watts @ 4Ω / 40 Watts @ 8Ω / 20 Watts @ 16Ω
Dimensions: 190mm(D) x 118.5mm(W) x 53.5mm (H)
Weight: 590g
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always turn down the volume knob on your power amp before plugging or unplugging
power jacks, cables, etc.
The power amp is protected against the following malfunctions: short-circuit, overheating,
over-voltage, under-voltage and DC issues. ALL OUTPUTS WILL BE MUTED in case the
above malfunctions occur. If this happens, please check the power supply and all cable
connections, then restart the unit and resume normal operation.
The contents of this manual are subject to change without notice.
Page 2
1
Controls the output volume
2
3
Power amp input jack, for connecting pedals/preamps
4
18-20V DC adapter plug (center positive)
5
Unit on/off switch
6
Cabinet connector jack (4-16 Ω)
Loading...