Hotone Binary Amp Owner's Manual

Binary Amp Owner's Manual

DES IGN I NSP IRAT ION

Congratulations on your new Ho tone Binary pedal! You have just added some serious power to your pedalboard.

The Binary seri es lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling
system ensu re a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED
screen offers clear, detailed display.

Binary Amp is an amp simulator delivering precise cl assic amp sounds along with high quality cab simulators, and a built-in
FX loop lets you expand your own sou nd.

Welcome

DES IGN I NSP IRAT ION

✪ Grown out of next-gen XTOMP technology
✪ Compact, easy-to-use dual footswitch amp simulator pedal
✪ Advanced CDCM modeling system ensures realistic playing experience
✪ Dual DSP-powered platform ensures high sound quality
✪ 24-bit A/D/A conversion, up to 110dB S/N ratio
✪ 16 CDCM powered legendary amp models along with dedicated cab models
✪ USB jack for firmware upgrading, loading/managing effects with free PC/Mac software
✪ FX Loop jacks for expanded effects
✪ 10 Presets (2 banks x 5 presets)
✪ Built-in OLED screen with clear display
✪ 5 transparent knobs with LEDs
✪ 9V DC power supply

Features

DES IGN I NSP IRAT ION

1-2.▽/△:For selecting presets, bypass, and other parameters.

3. +/- buttons: For selecting effects and adjusting parameters.

4. CAB SIM button: For switching cab sim on/off.

5. SAVE button: For saving parameter changes.

6. OLED screen: Shows bank/patch numbers, setting values and other operation info.

7. VOL: Controls effect output level.
8-10. BASS/MIDDLE/TREBLE: 3-Band EQ, controls the effect tone.

11. GAIN: Controls effect gain amount.

12. INPUT: 1/4” (6.35mm) mono jack, for plugging in instruments or other effects.
13-14. SEND/RETURN jacks: 1/4” (6.35mm) mono jacks, for connecting other effects.

15. OUTPUT: 1/4” (6.35mm) mono jack, for connecting to amps or other effects.

16. USB jack: Mini USB jack, for effects editing, firmware updates, and factory reset.

17. DC 9V: Plug in your power supply here (DC 9V, center negative).

Panel Introduction

DES IGN I NSP IRAT ION

Note:

1. If Binary Amp sounds harsh or weird when connecting to the input jack on your amp, try to connect to the amp’s FX Loop return jack.

2. TURN ON FIRST, TURN OFF LAST. Always mute the mixer/audio interface or turn down the volume knob on your amp before plugging or unplugging
power jacks, cables, etc. When you're using a mixer or an audio interface, please adjust the knobs onboard carefully to avoid signal clipping.

Connections