Hot Max Torches PW3000 User Manual

Operator’s Manual

Power Washer

Model: PW3000

WARNING: Do not assemble, install or operate this equipment without reading ALL

of this manual and the safety precautions and warning illustrated in this manual.

KDAR Company
1 Mulch Lane
St. Louis, MO 63044

Tel: [phone]
Fax: [phone]
Web: www.hotmaxtorches.com

SAFETY PRECAUTIONS AND WARNINGS

PLEASE READ BEFORE USING EQUIPMENT

DANGER

DANGER indicates a potentially hazardous situation which, if not avoided, WILL, result in
death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate personal injury, or property damage.

WARNING—Failure to follow the in­structions and warnings in this manual
may result in death, serious injury or

property damage.

1. Know your power washer and how to
use it properly. When using the power
washer consider the limitations and po­tential hazards.

2. The power washer must be placed on a
firm surface with sufficient support.

3. This power washer was designed for
specific applications. Do not modify or
use for any application for which it is
not designed.

4. Do not tamper with the parts that

may increase or decrease the gov­erned engine speed. Increased engine

speed increases the chance of personal
injury.

5. Always remove the spark plug or spark
plug cable before performing mainte­nance to avoid accidental starting.

6. Never operate a power washer with
missing or broken parts or without
protective housing or covers.

7. Store the power washer in a well ven-

tilated area with the fuel tank empty.

8. Always keep the power washer clean
and free of oil, mud and other foreign
matter.

9. Do not touch engine muffler or other
engine or pump parts which get hot
during operation.

10. Never operate the power washer un­der the following conditions:

a. A noticeable change in engine

speed.

b. A noticeable loss of pressure.

c. Engine misfiring.
d. Smoke or flames are present.
e. In an enclosed area.
f. With excessive vibration.
g. In rain or inclement weather.

11. Do not allow the hose to be in contact
with the muffler when it is hot.

KDAR Company 1

SAFETY PRECAUTIONS AND WARNINGS

PLEASE READ BEFORE USING EQUIPMENT

12. Stay alert. Watch what you are doing and
use common sense when operating a
power washer. Do not use a power wash­er while tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating the power
washer may result in serious personal
injury or death.

13. Follow the instructions in this manual for
preparing to store a power washer. Never

store fuel near the power washer.

14. Never direct water spray toward electri­cal wiring or directly at the power wash­er.

15. Never direct spray at people or animals.

16. Never let children operate the power
washer at any time.

17. Use both hands to control the wand.

18. Do not touch the nozzle or water spray
while operating.

19. Wear safety glasses during operation.

20. Use only approved hoses and nozzles.

21. All hose connections must be properly

sealed.

22. Use only recommended chemicals.

23. Check the unit before each use for signs
of deterioration such as worn or porous
hose, loose or missing fittings, a dam­aged tank or cap. Replace all defective
parts before operating the power washer.

24. The power washer should be operated,
serviced and/or refueled under the fol­lowing conditions only.

a. Start and run the power washer out-

doors. Never run a power washer in

an enclosed area even if the win-

dows and doors are opened. Avoid
areas where exhaust vapors can be
trapped. DANGER—CARBON
MONOXIDE HAZARD: The engine
exhaust contains carbon monoxide,
a poisonous, odorless, invisible gas
which, if breathed, may cause death
or personal injury.

b. Good ventilation for cooling. The

power washer is air cooled and
requires appropriate air flow.
Temperatures should not exceed
104° F ambient.

c. Refuel the power washer in a well

ventilated area with sufficient
light. Allow the engine to cool for 3

-4 minutes before refueling. Avoid
spills and never refuel while the

power washer is running.

d. Never refuel the power washer

near open flames, sparking elec­trical equipment or pilot lights.

e. Never start or run the power

washer without the muffler and
air filter installed and in good con­dition as they work as flame ar­resters in case of backfires.

f. Never smoke near the generator.

25. Do not kink the high pressure hose.

26. Do not wear lose clothing or jewelry

that could get caught in the starter or

other moving parts.

27. Be sure ice has not formed anywhere on
or in the equipment prior to starting the
engine in cold weather.

28. Place the power washer away from
cleaning site during operation.

29. Secure the locking trigger when not in
use.

30. Never use damaged high pressure hoses.

31. Do not run the power washer for more
then 5 minutes without pulling the trig­ger. This could damage the pump.

32. Never insert anything through the venti-

lation slots, this could cause damage to
the power washer or personal injury.

33. Drain fuel before transporting the power
washer.

34. Power washers are heavy, use proper
lifting techniques.

KDAR Company 2

Specifications/Features & Benefits/Package Contents

Pump

Type CAM

Running Pressuer 2200 PSI
Peak Preassuer 3000 PSI
Gallons Per Minute 2.1
Thermal Releif Valve Standard
Low Pres. Det Inj. Yes Fuel Capacity 1.0

Engine Type & Dis­placement OHV Single Cylinder 196cc

Maximum Output HP/
RPM 6.5/3600

Oil Capacity .63 Qt. (.6 Liter)
Low Oil Shut Down Standard
Fuel Type Gasoline

Table 1

Features

1. 3000 PSI Maximum Pressure

2. 2200 PSI Rated Pressure

3. 2.1 Gallons Per Minute Output

4. CAM Type Pump

5. 20 Foot Hose

6. Thermal Relief Valve

7. Quick Connect Water Hose Fitting

8. 5 Quick Change Nozzles (0, 15, 25, 40 Degree
and Detergent)

9. Low Pressure Detergent Injection

10. 6.5 HP Engine at 3600 RPM

11. Low Oil Shut Off

12. Spark Arresting Muffler

13. 10” Air Wheels with Quick Attach Axles

14. 1 GAL Fuel Tank

15. EPA Engine Certification

16. Recoil Start

Engine

Package Contents

1. Engine Pump Assembly

2. Operator’s Manual

3. Warranty Card

4. Spark Plug Wrench

5. Screw Driver

6. Gun Handle

7. Extension Spray Wand

8. 20’ Hose

9. 0° Spray Nozzle (Red)

10. 15° Spray Nozzle (Yellow)

11. 25° Spray Nozzle (Green)

12. 40° Degree Spray Nozzle (White)

13. Detergent Nozzle (Black)

14. Tip Cleaner

15. Handle

16. Wheels w/ Axle Attached (2)

17. Holder for Hose

18. Holder for Gun

19. Bolts M6x45 (4)

20. Bolts M6x40 (2)

21. Nuts M6 (6)

22. Washer M6 (8)

KDAR Company 3

Handle

Gun

Set Up

Nozzle

High

Pressure

Hose

Wheel

Thermal Relief

Hose

Muffler

Pump

Thermal Relief

Valve

Fuel Tank

Extension

Spray
Wand

Fuel

Valve

Throttle

Choke

Water Supply

Connection

Detergent Take

Up Hose

Water

Output

Air

Filter

Manual Recoil

Starter

4 KDAR Company