Hotcig R233 User Manual
User Manual En
Please read the user manual carefully before using
R233 and keep it properly. The accessory instructions
is included in this manual
510 connector
Fire Button
RGB breathing light
Potentiometer
LED Battery indicator
①
②
③
④
⑤
Product details:
Thank you for choosing R233 adjustable box mod
which designed & manufactured by Hotcig. In order to get
the best vaping experience, be sure to read the instructions
and precautions carefully. In addition, please keep this
Instruction Manual for further reference if necessary.
Powered by dual 18650 batteries, R233 is R-Series
product from Hotcig, heartbeat by HM chipset.
Interchangeable magnetic panels. Wattage output ranges
from: 10.0W to 233.0W.
Operating Instructions
：
1. On/ Off:
Once equipped with battery, RGB light will flash 3
times while switch on, 5x click fire button, RGB light
flashes 5 times and switch off. With the device off, 5x
click re button, RGB light ashes 3 times and turn on. On
Standby mode, RGB light will display at breathing status,
the light would be off after 30s without operation.
2. Wattage adjustment:
The potentiometer control knob is for wattage
adjustment. At gear 1, RGB light flashes in green(10W60W), at gear 2, RGB light in blue(61W-120W), at gear
3, RGB light in red(121W-180W), at gear 4, RGB light in
various color(181W-233W).
3.Alarm hints:
• No atomizer(low/ high resistance):
RGB light ashes 3 times in red
• Short circuit: RGB light ashes 5 times in red
• Check battery: RGB light ashes 4 times in red
• Overheat: RGB light ashes 6 times in red
• Low voltage: RGB light ashes 8 times in green
4. Power hints:
100% power displayed at 4 indicators. 75% power
displayed at 3 indicators. 50% power displayed at 2
indicators. 25%power displayed at 1 indicator. At low
power, 1 indicator will ash 3 times.
Loading...