Hotchkis 80410-1 User Manual

19410 STREET COIL SET

01-UP LEXUS IS300

Thank you for your purchase from our line of Lexus parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

of your Hotchkis products. Visit us online @ www.hotchkis.net

• This installation will require:

 A coil spring compressor, jack stands, floor jack
 The following wrenches or sockets: 10mm, 12mm, 14mm, 17mm

 The following Allen wrenches or hex sockets: 5mm

 Torque wrench.

INSTALLATION OF FRONT COIL SPRINGS

1) Securely block the rear wheels of the vehicle. Do not jack up the vehicle yet!

2) Use a 10mm socket or wrench to loosen and remove the two small nuts holding the electrical
box to the strut mounts on the driver’s side. Remove the two nuts on the passenger side as well
to remove the heat sync. THIS ITEM MAY BE HOT! Move both components off to the side and
retain the stock mounting hardware. This should expose the strut mount nuts on each side.